The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections. This
appears to be the only offender.
* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cc6d19f3 added text containing "<code>snapshot<code>" to
formatsnapshot.html.in. The closing tag is missing '/' which causes
the documentation to misrender.
Python code generator "generate_source" section that handles
code generation to "free" inherited objects needs to generate
DISPATCH_FREE calls for all extended_by objects.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit eca3fdf inadvertantly caused a failure to start for any domain
with the following in its config:
<graphics type='spice' autoport='yes'/>
The problem is that when tlsPort == 0 and defaultMode == "any" (which
is the default for defaultMode), this would be flagged in the code as
"needTLSPort", and if there was then no spice tls config, the new
error+fail would happen.
This patch checks for the case of defaultMode == "any", and in that
case simply doesn't allocate a TLS port (since that's probably not
what the user wanted, and it would have failed later anyway.). It does
leave the error in place for cases when the user specifically asked to
use tls in one way or another, though.
On cygwin, compilation failed because SIOCSIFHWADDR is undefined.
* src/util/virnetdev.c (virNetDevSetMAC): Cygwin can query but not
set mac address.
Signed-off-by: Eric Blake <eblake@redhat.com>
As a result of commit id '19c345f2', 'make -C tests valgrind' has the
following for qemuxml2argvtest:
==22482== 197 (80 direct, 117 indirect) bytes in 1 blocks are definitely lost in loss record 101 of 120
==22482== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==22482== by 0x4C6F301: virAlloc (viralloc.c:124)
==22482== by 0x4C840FC: virSaveLastError (virerror.c:308)
==22482== by 0x431882: qemuBuildCommandLine (qemu_command.c:8204)
==22482== by 0x41E8F0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:155)
==22482== by 0x41FE9F: virtTestRun (testutils.c:157)
==22482== by 0x419DEB: mymain (qemuxml2argvtest.c:654)
==22482== by 0x4204DA: virtTestMain (testutils.c:719)
==22482== by 0x39D0821A04: (below main) (libc-start.c:225)
==22482==
FreeBSD (and maybe other BSDs) have different member
names in struct ifreq when compared to Linux, such as:
- uses ifr_data instead of ifr_newname for setting
interface names
- uses ifr_index instead of ifr_ifindex for interface
index
Also, add a check for SIOCGIFHWADDR for virNetDevValidateConfig().
Use AF_LOCAL if AF_PACKET is not available.
Signed-off-by: Eric Blake <eblake@redhat.com>
If virPCIDeviceGetVFIOGroupDev() failed,
virSecurity*(Set|Restore)HostdevLabel() would fail to free a
virPCIDevice that had been allocated.
These leaks were all introduced (by me) very recently, in commit
f0bd70a.
libxlBuildDomainConfig() was disposing the libxl_domain_config object
on error, only to have it disposed again by libxlBuildDomainConfig()'s
caller, which resulted in a segfault. Leave disposing of the config
object to it's owner.
These fixes solve a compilation failure on FreeBSD:
util/virnetdevtap.c: In function 'virNetDevTapGetName':
util/virnetdevtap.c:56: warning: unused parameter 'tapfd' [-Wunused-parameter]
util/virnetdevtap.c:56: warning: unused parameter 'ifname' [-Wunused-parameter]
* src/util/virnetdevtap.c (virNetDevTapGetName): Add attributes
when TUNGETIFF is not present.
Signed-off-by: Eric Blake <eblake@redhat.com>
Mention file/volume contents instead of just 'file'/'volume'.
Also change Download->download in vol-download help,
to be consistent with other volume commands.
https://bugzilla.redhat.com/show_bug.cgi?id=955537
qemuBuildMemballoonDevStr returns NULL if memballoon doesn't have
the right address type, but it doesn't report an error, leading to:
error: An error occurred, but the cause is unknown
Report a helpful error message instead, e.g.:
error: XML error: memballoon unsupported with address type 'usb'
For long options, print:
* the option as specified by the user if it's unknown
* the canonical long option if its argument is not
a number (and should be)
And for missing arguments, print both the short and
the long option name.
(Doing only one of those would require either parsing
argv ourselves or let getopt print the errors, since
we can't tell long and short options apart by optopt
or longindex)
https://bugzilla.redhat.com/show_bug.cgi?id=949373
Unsupported long option:
$ virsh --pm
Before:
error: unsupported option '-
After:
error: unsupported option '--pm'. See --help.
Missing parameter:
$ virsh --deb
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
$ virsh -rd
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
Non-numeric parameter:
$ virsh --deb duck
Before:
error: option -d takes a numeric argument
After:
error: option --debug takes a numeric argument
When a user requests auto-allocation of the spice TLS port but spice TLS
is disabled in qemu.conf, we start the machine and let qemu fail instead
of erroring out sooner.
Add an error message so that this doesn't happen.
On the off-chance that creation of persistent configuration file would
fail when defining a network that is already started as transient, the
code would remove the transient data structure and thus the network.
This patch changes the code so that in such case, the network is again
marked as transient and left behind.
The USB-specific cgroup setup had been inserted inline in
qemuDomainAttachHostUsbDevice and qemuSetupCgroup, but now there is a
common cgroup setup function called for all hostdevs, so it makes sens
to put the usb-specific setup there and just rely on that function
being called.
The one thing I'm uncertain of here (and a reason for not pushing
until after release) is that previously hostdev->missing was checked
only when starting a domain (and cgroup setup for the device skipped
if missing was true), but with this consolidation, it is now checked
in the case of hotplug as well. I don't know if this will have any
practical effect (does it make sense to hotplug a "missing" usb
device?)
PCIO device assignment using VFIO requires read/write access by the
qemu process to /dev/vfio/vfio, and /dev/vfio/nn, where "nn" is the
VFIO group number that the assigned device belongs to (and can be
found with the function virPCIDeviceGetVFIOGroupDev)
/dev/vfio/vfio can be accessible to any guest without danger
(according to vfio developers), so it is added to the static ACL.
The group device must be dynamically added to the cgroup ACL for each
vfio hostdev in two places:
1) for any devices in the persistent config when the domain is started
(done during qemuSetupCgroup())
2) at device attach time for any hotplug devices (done in
qemuDomainAttachHostDevice)
The group device must be removed from the ACL when a device it
"hot-unplugged" (in qemuDomainDetachHostDevice())
Note that USB devices are already doing their own cgroup setup and
teardown in the hostdev-usb specific function. I chose to make the new
functions generic and call them in a common location though. We can
then move the USB-specific code (which is duplicated in two locations)
to this single location. I'll be posting a followup patch to do that.
Don't reserve slot 2 for video if the machine has no PCI buses.
Error out when the user specifies a video device without
a PCI address when there are no PCI buses.
(This wouldn't work on a machine with no PCI bus anyway since
we do add PCI addresses for video devices to the command line)
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
This isn't strictly speaking a bugfix, but I realized I'd gotten a bit
too verbose when I chose the names for
VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_*. This shortens them all a bit.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
<source type='bridge'> uses a helper application to do the necessary
TUN/TAP setup to use an existing network bridge, thus letting
unprivileged users use TUN/TAP interfaces.
However, libvirt should be preventing QEMU from running any setuid
programs at all, which would include this helper program. From
a security POV, any setuid helper needs to be run by libvirtd itself,
not QEMU.
This is what this patch does. libvirt now invokes the setuid helper,
gets the TAP fd and then passes it to QEMU in the normal manner.
The path to the helper is specified in qemu.conf.
As a small advantage, this adds a <target dev='tap0'/> element to the
XML of an active domain using <interface type='bridge'>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used on a tap file descriptor returned by the bridge helper
to populate the <target> element, because the helper does not provide
the interface name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch fix the wrong sequence for fd and timeout register. the sequence
was right in dfa1e1dd for fd register, but it changed in e0622ca2.
in this patch, set priv, xl_priv in info and increase info->priv ref count
before virEventAddHandle. if do this after virEventAddHandle, the fd
callback or fd deregister maybe got the empty priv, xl_priv or wrong ref
count.
after apply this patch, test more than 100 rounds passed compare to fail
within 3 rounds without this patch. each round includes define -> start ->
destroy -> create -> suspend -> resume -> reboot -> shutdown -> save ->
resotre -> dump -> destroy -> create -> setmem -> setvcpus -> destroy.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
VFIO requires all of the guest's memory and IO space to be lockable in
RAM. The domain's max_balloon is the maximum amount of memory the
domain can have (in KiB). We add a generous 1GiB to that for IO space
(still much better than KVM device assignment, where the KVM module
actually *ignores* the process limits and locks everything anyway),
and convert from KiB to bytes.
In the case of hotplug, we are changing the limit for the already
existing qemu process (prlimit() is used under the hood), and for
regular commandline additions of vfio devices, we schedule a call to
setrlimit() that will happen after the qemu process is forked.
These were previously being set in a custom hook function, but now
that virCommand directly supports setting them, we can eliminate that
part of the hook and call the APIs directly.
This patch adds two sets of functions:
1) lower level virProcessSet*() functions that will immediately set
the RLIMIT_MEMLOCK. RLIMIT_NPROC, or RLIMIT_NOFILE of either the
current process (using setrlimit()) or any other process (using
prlimit()). "current process" is indicated by passing a 0 for pid.
2) functions for virCommand* that will setup a virCommand object to
set those limits at a later time just after it has forked a new
process, but before it execs the new program.
configure.ac has prlimit and setrlimit added to the list of functions
to check for, and the low level functions log an "unsupported" error)
on platforms that don't support those functions.
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".
Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'virsh help | grep nodedev-det' shows only nodedev-detach, but
'virsh help nodedev | grep nodedev-det' also shows the old alias
nodedev-dettach that we intentionally hid in commit af3f9aab.
See also commit 787f4fe and this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=956966
* tools/virsh.c (vshCmdGrpHelp): Copy suppression of vshCmdHelp.
Signed-off-by: Eric Blake <eblake@redhat.com>
Legacy kvm style pci device assignment requires changes to the
labelling of several sysfs files for each device, but for vfio device
assignment, the only thing that needs to be relabelled/chowned is the
"group" device for the group that contains the device to be assigned.
