Commit Graph

77 Commits

Author SHA1 Message Date
John Ferlan
0d6e834103 virsh: Clear vsh last error during virshCommandOptVolBy
https://bugzilla.redhat.com/show_bug.cgi?id=1529256

If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2018-04-17 11:19:13 -04:00
Michal Privoznik
f81f8b62bd virsh: Introduce virshStorageVolNameCompleter
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:51:19 +01:00
Michal Privoznik
69026fc270 virsh: Introduce virshStoragePoolNameCompleter
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-01-24 13:49:56 +01:00
Michal Privoznik
27b67eba22 virsh: Define multi line macros properly
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-11-04 08:38:08 +01:00
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Michal Privoznik
7823e2561b virsh: Implement sparse stream to vol-upload
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
f03b44b2df virsh: Implement sparse stream to vol-download
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Wang King
9db0a63b7e tools: remove unused assignment statement in virshStorageVolListCollect
Assigning value true to @success if there is no volumes, that stored value is not used.
2017-04-13 08:14:54 -04:00
Peter Krempa
e8a61ae4bd virsh: Add new file for utility functions and move a few
Don't accumulate helpers in virsh.c
2017-04-12 13:23:10 +02:00
Ján Tomko
df6551feb4 virsh: reject more negative numbers
Be more positive and reject negative numbers where we don't
allow them by using the virStrToLong variants with 'p'.

https://bugzilla.redhat.com/show_bug.cgi?id=1436119
2017-03-27 17:20:03 +02:00
John Ferlan
f62e418c86 virsh: Allow display of the physical volume size
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-20 13:54:03 -05:00
Erik Skultety
bdd6899b55 tools: Replace vshPrint with vshPrintExtra on places we forgot about
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-11-14 12:14:11 +01:00
Erik Skultety
53525f914d tools: use vshError rather than vshPrint on failure
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-11-14 12:14:11 +01:00
Ivan Baldo
83adcb5bdf virsh: Be explicit that vol-resize is an offline operation.
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-10-13 07:57:31 +02:00
Yanqiu Zhang
ed8ba91ef2 storage: Delete extra wrap after vol-resize error
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:

   (1)# virsh vol-resize --pool default --vol vol-test 5M
        error: Failed to change size of volume 'vol-test' to 5M

        error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified

   (2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
        error: Failed to change size of volume 'volds' by 10M

        error: invalid argument: can't shrink capacity below existing allocation
2016-09-07 11:11:30 -04:00
Pino Toscano
4362ff4337 virsh: use vshError consistently after virBufferError checks
If virBufferError() reports an error, then vshError() is needed to
report the error situation instead of a simple vshError().
2016-08-24 17:43:29 +02:00
Pino Toscano
b620bdee14 virsh: respect -q/--quiet more
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.

Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
2016-08-24 17:43:29 +02:00
Peter Krempa
f4bdf2e3ab virsh: volume: Add --bytes to 'vol-info' 2016-05-04 10:03:04 +02:00
Cole Robinson
2f1dc3de46 man: Clarify virsh vol-clone works within a single pool
virsh vol-clone is expected to clone a volume within a single
pool; it doesn't work for cloning across pools. Clarify the docs

https://bugzilla.redhat.com/show_bug.cgi?id=1103714
2016-04-20 08:55:31 -04:00
Olga Krishtal
ee36975597 storage: add ploop volume type
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-04-15 17:27:32 +02:00
Michal Privoznik
64e66d8ed6 virsh: Teach vol-create-as to --print-xml
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately vol-create-as
was missing it. Maybe nobody had needed it yet. Well, I did
just now.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-12 16:16:09 +01:00
Michal Privoznik
bb0b8e5d67 cmdVolCreateAs: Rework to follow usual func pattern
The way we usually write functions is that we start the work and
if something goes bad we goto cleanup and roll back there. Or
just free resources that are no longer needed. Do the same here.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-12 16:16:09 +01:00
Wido den Hollander
63cdc92f04 storage: Add TRIM algorithm to storage volume API
This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2016-01-29 11:09:14 -05:00
John Ferlan
5b436359a8 virsh: Create macros for common "vol" options
Rather than continually cut-n-paste the strings into each command,
create common macros to be used generically.  Replace the more commonly
used "vol" option with a macro. This also adjusts 2 commands that
didn't have the correct helpstr - 'vol-create-from' and 'vol-clone'.
Both are described in the man page as taking vol, path, or key and
the code uses the virshCommandOptVol instead of virshCommandOptVolBy.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:01 -05:00
John Ferlan
febf69b5e9 virsh: Create macro for common "file" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option.  Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
70c6e67766 virsh: Adjustments for the VIRSH_COMMON_OPT_POOL
The macro is slightly adjusted to add an argument "_helpstr". This
will be passed as a translation macro string since other uses of the
option may not have the same exact help string (such as is the case
when the uuid is not suppliable for create commands).

In virsh-pool.c - we'll create a singular VIRSH_COMMON_OPT_POOL_FULL
in order to pass along the 'N_("pool name or uuid")'

In virsh-volume.c there will be a VIRSH_COMMON_OPT_POOL_FULL and a
VIRSH_COMMON_OPT_POOL_NAME, which passes 'N_("pool name")' for
the commands that can only pass a name. There will also be a
VIRSH_COMMON_OPT_POOL_OPTIONAL which is used for the command
options which use OT_STRING and don't require the --pool argument.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
2eba5c5635 virsh: Add --delete-snapshots flag for undefine and vol-delete
https://bugzilla.redhat.com/show_bug.cgi?id=1281710

Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag.  This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.

For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.

Currently only supported for rbd backends.
2015-12-18 10:51:08 -05:00
Ján Tomko
ea723c4826 virsh: rename vshCommandOptString to vshCommandOptStringQuiet
This function does not set an error. Make it obvious in its name
to discourage its usage without reporting an error in the caller.
2015-12-09 10:44:26 +01:00
Erik Skultety
834c5720e4 tools: Introduce new client generic module vsh
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
2015-08-14 15:45:44 +02:00
Andrea Bolognani
815dc963ee virsh: Move error messages inside vshCommandOpt*() functions 2015-06-02 09:20:31 -04:00
Andrea Bolognani
be6ff4da95 virsh: Pass vshControl to all vshCommandOpt*() calls
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.

We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.

vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
2015-06-02 09:20:31 -04:00
Ján Tomko
0a33bba1ae virsh: make negative values with vol-resize more convenient
When shrinking a volume by a certain size, instead of typing
  vol-resize volume 1G --delta --shrink
we allow the convience of specifying a negative value:
  vol-resize volume -1G --delta --shrink
getting the same results with one more character.

A negative value only makes sense as a delta. Imply the
--delta parameter if the value is negative.

Still require --shrink, because the operation is potentially
destructive.
2015-06-01 13:56:49 +02:00
Andrea Bolognani
449316701b virsh: Improve error message on integer value parsing failure.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
2015-05-18 10:50:06 +02:00
Chen Hanxiao
219ea41d8d virsh-volume: add support for --reflink
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.

Updated the man page to describe the new flag.

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2015-02-03 11:37:30 -05:00
Shanzhi Yu
cd53d947ef virsh: vol-upload disallow negative offset
Commit 570d0f63 describes disabling negative offset usage for
vol-upload/download (e.g. cmdVolDownload and cmdVolUpload; however,
the change was only made to cmdVolDownload. There was no change to
cmdVolUpload.  This patch adds the same checks for vol-upload.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
2014-12-03 08:43:59 -05:00
Martin Kletzander
91cc3d9570 Remove unnecessary curly brackets in tools/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Martin Kletzander
11d9dd1ad8 virsh: Reorder some options
According to comments in parsing functions, optional options should be
specified *after* required ones.  It makes sense and help output looks
cleaner.  The only exceptions are options with type == VSH_OT_ARGV.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-13 15:44:23 +01:00
Martin Kletzander
93cf8f9861 cleanup spaces between parentheses and braces
And add a syntax-check for '){$'.  It's not perfect, but better than
nothing.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-20 14:50:21 +02:00
John Ferlan
570d0f6387 virsh vol-upload/download disallow negative offset
https://bugzilla.redhat.com/show_bug.cgi?id=1087104

Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.

However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file.  Providing other negative values resulted in errors such as:

$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
  --offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument

$

Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op.  Therefore,
disallow a negative value for offset.

Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
2014-07-17 13:15:12 -04:00
Peter Krempa
c62125395b virsh: Reject negative numbers in vshCommandOptULongLong
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
2014-06-12 14:06:21 +02:00
Peter Krempa
6ef0b03483 virsh: Check whether found volume is member of the specified storage pool
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:

Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':

Currently we'd return:
  $ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
  Name:           test.qcow
  Type:           file
  Capacity:       100.00 MiB
  Allocation:     212.00 KiB

After the fix:
 $ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
 error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
2014-06-02 10:56:49 +02:00
Ján Tomko
5d8793eebb Indent top-level labels by one space in tools/ 2014-03-25 14:58:41 +01:00
Laine Stump
64bb902451 virsh: eliminate hardcoded indentation in xml generated for commands
These are never seen externally, only passed into libvirt APIs, so in
practice this makes no real difference, but it's good to be
consistent.
2014-03-14 00:02:38 -06:00
Peter Krempa
a751e3452b virsh: volume: Fix lookup of volumes to provide better error messages
If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.

This changes the error in case the user-selected pool is inactive from:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: failed to get vol 'somevolname'
 error: Storage volume not found: no storage vol with matching path
 somevolname

To a more descriptive:

 $ virsh vol-upload --pool inactivepool --vol somevolname volcontents
 error: pool 'inactivepool' is not active

And in case a user specifies an invalid pool from:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: failed to get vol 'somevolname', specifying --pool might help
 error: Storage volume not found: no storage vol with matching path somevolname

To something less confusing:

 $ virsh vol-upload --pool invalidpool --vol somevolname volcontents
 error: failed to get pool 'invalidpool'
 error: Storage pool not found: no storage pool with matching name 'invalidpool'
2014-03-05 09:08:32 +01:00
Eric Blake
50f7960d37 virsh: kill over-engineered asprintf failure recovery
I noticed this while shortening switch statements via VIR_ENUM.
Basically, the only ways virAsprintf can fail are if we pass a
bogus format string (but we're not THAT bad) or if we run out
of memory (but it already warns on our behalf in that case).
Throw away the cruft that tries too hard to diagnose a printf
failure.

* tools/virsh-volume.c (cmdVolList): Simplify.
* tools/virsh-pool.c (cmdPoolList): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-24 11:47:18 -07:00
Eric Blake
466b12ab79 virsh: use more compact VIR_ENUM_IMPL
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future.  Make this change throughout virsh.

Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.

* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-24 11:47:18 -07:00
Eric Blake
ecd881b7a7 storage: add network-dir as new storage volume type
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory.  But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch.  Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).

* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 12:29:49 -07:00
Eric Blake
57682aea36 maint: fix comma style issues: tests, tools
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-20 09:14:55 -07:00
Peter Krempa
48072521b6 virsh-volume: Unify strigification of volume type
There were two separate places with that were stringifying type of a
volume. One of the places was out of sync with types implemented
upstream.

To avoid such problems in the future, this patch adds a common function
to convert the type to string and reuses it across the two said places.
2013-11-12 18:35:48 +01:00
Peter Krempa
d6fdcb88b9 virsh-volume: Unify alignment of vol-list output columns
Add an extra space before the first column as we have when listing
domains.

Previous output:

$ virsh vol-list glusterpool
Name                 Path
-----------------------------------------
asdf                 gluster://gluster-node-1/gv0/asdf
c                    gluster://gluster-node-1/gv0/c
cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
Name  Path                               Type     Capacity  Allocation
----------------------------------------------------------------------
asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B

New output:

$ virsh vol-list glusterpool
 Name                 Path
------------------------------------------------------------------------------
 asdf                 gluster://gluster-node-1/gv0/asdf
 c                    gluster://gluster-node-1/gv0/c
 cd                   gluster://gluster-node-1/gv0/cd

$ virsh vol-list glusterpool --details
 Name  Path                               Type     Capacity  Allocation
------------------------------------------------------------------------
 asdf  gluster://gluster-node-1/gv0/asdf  unknown    0.00 B      0.00 B
 c     gluster://gluster-node-1/gv0/c     unknown   16.00 B     16.00 B
 cd    gluster://gluster-node-1/gv0/cd    unknown    0.00 B      0.00 B
2013-11-12 17:01:25 +01:00