We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element. This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.
(device
(vif
(mac '00:16:3e:1b:b1:47')
(rate '10240KB/s')
...
)
)
Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add unit tests to check the conversion logic.
This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
Change all sexpr2xml tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch implements formating and parsing code for the backing store
schema defined and documented by the previous patch.
This patch does not aim at providing full persistent storage of disk
backing chains yet. The formatter is supposed to provide the backing
chain detected when starting a domain and thus it is not formatted into
an inactive domain XML. The parser is implemented mainly for the purpose
of testing the XML generated by the formatter and thus it does not
distinguish between no backingStore element and an empty backingStore
element. This will have to change once we fully implement support for
user-supplied backing chains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There is no keyboard support currently in libvirt.
For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name. This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)
XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'
Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)
xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.
For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.
With these changes, it is also necessary to adjust the xen tests:
"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.
adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.
Some statements change their order because code was moved around.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
On xen 4.1 I observed configurations that look like:
(image
(hvm
(kernel '')
(loader '/foo/bar')
))
The kernel element is there but unset. This leads to an empty <kernel/>
element in the XML and even worse makes us skip the boot order parsing
and therefore not emit a <boot device='$dev>'/> element which breaks CD
booting.
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
Recent versions of Xen disable the virtual HPET by default. This is
usually more precise because tick policies are not implemented for
the HPET in Xen. However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.
This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this is the patch to add support for multiple serial ports to the
libvirt Xen driver. It support both old style (serial = "pty") and
new style (serial = [ "/dev/ttyS0", "/dev/ttyS1" ]) definition and
tests for xml2sexpr, sexpr2xml and xmconfig have been added as well.
Written and tested on RHEL-5 Xen dom0 and working as designed but
the Xen version have to have patch for RHBZ #614004 but this patch
is for upstream version of libvirt.
Also, this patch is addressing issue described in RHBZ #670789.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.
See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
This relies on the fact that def->maxvcpus can be at most 32 with xen.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* src/xen/sexpr.c: Ensure () are escaped in sexpr2string
* tests/sexpr2xmldata/sexpr2xml-boot-grub.sexpr,
tests/sexpr2xmldata/sexpr2xml-boot-grub.xml,
tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr,
tests/xml2sexprdata/xml2sexpr-boot-grub.xml: Data files to
check escaping
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Add boot-grub
escaping test case
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
'listen' isn't a valid qemu-dm option, as reported a long time ago here:
https://bugzilla.redhat.com/show_bug.cgi?id=492958
Matches the near identical logic in qemu_conf.c
v2: When parsing sexpr, only match on ",server", rather than
full ',server,nowait'.
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
Test case for the fix applied in
commit 14435163a0
Author: Daniel Veillard <veillard@redhat.com>
Date: Fri Jun 26 18:14:16 2009 +0000
* tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.sexpr,
tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.xml: Data
files exhibiting the crash
* tests/sexpr2xmltest.c: Process new data files
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
