The frequency is documented and formatted as an attribute of the <timer>
element rather than a nested <frequency> element expected by the parser.
Luckily enough, timer frequency has not been used by any driver so far.
And users were not able to set it in the XML either.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
- Make virMediatedDeviceNew() stub args match its prototype
- Fix typo: virRerportError -> virReportError
- Move MDEV_SYSFS_DEVICES definition out of the #ifdef __linux__ block
so we don't have to stub virMediatedDeviceGetSysfsPath()
https://bugzilla.redhat.com/show_bug.cgi?id=1430679
As it turns out some file headers (e.g. ext4) may be larger/longer than
the 512 bytes of zeros being written prior to a pvcreate, so let's write
out 2048 bytes similar to how the pvcreate sources would peek at the first
4 sectors of the device.
Make sure there is at enough bytes on the device to clear before doing
doing the clear - just to be sure.
This adds a few validations to the devices listed for a hostdev network:
* devices must be listed by PCI address, not by netdev name
* listing a device by PCI address is valid only for hostdev networks, not
for other types of network (e.g. macvtap passthrough).
* each device in a hostdev pool must be an SR-IOV VF
Resolves: https://bugzilla.redhat.com/1004676
Previously, this function must've been called only on Linux in order
to fail gracefully. That lead to #ifdef mess in callers, so the
function was redesigned so it failed gracefully on non-existing
files. However that commit forgot to define the function outside the
__linux__ ifdef, it broke non-Linux builds.
Caused by c67e04e25f.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Matching the beginning of a path in syntax check does not work because
each path is enriched with a prefix of the source tree.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The test takes
x86-cpuid-Something-guest.xml CPU (the CPU libvirt would use for
host-model on a CPU described by x86_64-cpuid-Something.xml without
talking to QEMU about what it supports on the host)
and updates it according to CPUID data from QEMU:
x86_64-cpuid-Something-enabled.xml (reported as "feature-words"
property of the CPU device)
and
x86_64-cpuid-Something-disabled.xml (reported as "filtered-features"
property of the CPU device).
The result is compared to
x86_64-cpuid-Something-json.xml (the CPU libvirt would use as
host-model based on the reply from query-cpu-model-expansion).
The comparison is a bit tricky because the *-json.xml CPU contains fewer
disabled features. Only the features which are included in the base CPU
model, but listed as disabled in *.json will be disabled in *-json.xml.
The CPU computed by virCPUUpdateLive from the test data will list all
features present in the host's CPUID data and not enabled in *.json as
disabled. The cpuTestUpdateLiveCompare function checks that the computed
and expected sets of enabled features match.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All CPU features which QEMU does not know about but libvirt knows them
(currently "cmt" is the only one) are implicitly disabled by QEMU and
should be present in x86_64-cpuid-*-disabled.xml.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit v3.1.0-26-gd60012b4e started filtering hle and rtm features from
broken Intel Haswell CPUs. QEMU implemented similar functionality and
thus it doesn't report rtm and hle features as enabled for Core i5-4670T
CPU anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new command can be used to generate test data for virCPUUpdateLive.
When "cpu-cpuid.py diff x86-cpuid-Something.json" is run, it reads raw
CPUID data stored in x86-cpuid-Something.xml and CPUID data from QEMU
stored in x86-cpuid-Something.json to produce two more CPUID files:
x86-cpuid-Something-enabled.xml and x86-cpuid-Something-disabled.xml.
- x86-cpuid-Something-enabled.xml will contain CPUID bits present in
x86-cpuid-Something.json (i.e., enabled by QEMU for the "host" CPU)
- x86-cpuid-Something-disabled.xml will contain all CPUID bits from
x86-cpuid-Something.xml which are not present in
x86-cpuid-Something.json (i.e., CPUID bits which the host CPU
supports, but QEMU does not enable them for the "host" CPU)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new script is going to be more general and the original
functionality can be requested by "cpu-cpuid.py convert".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The public API flags are handled by the cpuBaselineXML wrapper. The
internal cpuBaseline API only needs to know whether it is supposed to
drop non-migratable features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
cpuBaseline is responsible for computing a baseline CPU while feature
expansion is done by virCPUExpandFeatures. The cpuBaselineXML wrapper
(used by hypervisor drivers to implement virConnectBaselineCPU API)
calls cpuBaseline followed by virCPUExpandFeatures if requested by
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES flag.
The features in the three changed test files had to be sorted using
"sort -k 3" because virCPUExpandFeatures returns a sorted list of
features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Having to use cpuBaseline with VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES
flag to expand CPU features is strange. Not to mention that cpuBaseline
can only expand host CPU definitions (i.e., it completely ignores
feature policies). The new virCPUExpandFeatures API is designed to work
with both host and guest CPU definitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This brings the libvirt version of this RNG file in line with the same
file in netcf (as soon as the corresponding patch there is ACKed and
pushed).
There's no reason to require it when defining an interface (the config
option it corresponds to is optional), and it isn't even output in the
status of an interface.
Resolves: https://bugzilla.redhat.com/1414404
This is the maximum for many reasons, for starters because index ==
bus number, and a controller's bus number is 8 bits.
This incidentally resolves: https://bugzilla.redhat.com/1329090
Having this information available will make it easier to determine the
culprit when MAC or vlan tag appear to not be set, eg.:
https://bugzilla.redhat.com/1364073
(This patch doesn't fix that bug, just makes it easier to diagnose)
If an SRIOV VF has previously been used for VFIO device assignment,
the "admin MAC" that is stored in the PF driver's table of VF info
will have been set to the MAC address that the virtual machine wanted
the device to have. Setting the admin MAC for a VF also sets a flag in
the PF that is loosely called the "administratively set" flag. Once
that flag is set, it is no longer possible for the net driver of the
VF (either on the host or in a virtual machine) to directly set the
VF's MAC again; this flag isn't reset until the *PF* driver is
restarted, and that requires taking *all* VFs offline, so it's not
really feasible to do.
If the same SRIOV VF is later used for macvtap passthrough mode, the
VF's MAC address must be set, but normally we don't unbind the VF from
its host net driver (since we actually need the host net driver in
this case). Since setting the VF MAC directly will fail, in the past
"we" ("I") had tried to fix the problem by simply setting the admin MAC
(via the PF) instead. This *appeared* to work (and might have at one
time, due to promiscuous mode being turned on somewhere or something),
but it currently creates a non-working interface because only the
value for admin MAC is set to the desired value, *not* the actual MAC
that the VF is using.
Earlier patches in this series reverted that behavior, so that we once
again set the MAC of the VF itself for macvtap passthrough operation,
not the admin MAC. But that brings back the original bug - if the
interface has been used for VFIO device assignment, you can no longer
use it for macvtap passthrough.
This patch solves that problem by noticing when virNetDevSetMAC()
fails for a VF, and in that case it sets the desired MAC to the admin
MAC via the PF, then "bounces" the VF driver (by unbinding and the
immediately rebinding it to the VF). This causes the VF's MAC to be
reinitialized from the admin MAC, and everybody is happy (until the
*next* time someone wants to set the VF's MAC address, since the
"administratively set" bit is still turned on).
Some PF drivers allow setting the admin MAC (that is the MAC address
that the VF will be initialized to the next time the VF's driver is
loaded) to 00:00:00:00:00:00, and some don't. Multiple drivers
initialize the admin MACs to all 0, but don't allow setting it to that
very same value. It has been an uphill battle convincing the driver
people that it's reasonable to expect The argument that's used is
that an all 0 device MAC address on a device is invalid; however, from
an outsider's point of view, when the admin MAC is set to 0 at the
time the VF driver is loaded, the VF's MAC is *not* set to 0, but to a
random non-0 value. But that's beside the point - even if I could
convince one or two SRIOV driver maintainers to permit setting the
admin MAC to 0, there are still several other drivers.
So rather than fighting that losing battle, this patch checks for a
failure to set the admin MAC due to an all 0 value, and retries it
with 02:00:00:00:00:00. That won't result in a random value being set
in the VF MAC at next VF driver init, but that's okay, because we
always want to set a specific value anyway. Rather, the "almost 0"
setting makes it easy to visually detect from the output of "ip link
show" which VFs are currently in use and which are free.
The global functions virNetDevReplaceMacAddress(),
virNetDevReplaceNetConfig(), virNetDevRestoreMacAddress(), and
virNetDevRestoreNetConfig() are no longer used, as their functionality
has been replaced by virNetDev(Save|Read|Set)NetConfig().
The static functions virNetDevReplaceVfConfig() and
virNetDevRestoreVfConfig() were only used by the above-named global
functions that were removed.
It takes longer to explain this than to fix it...
In the past we weren't able to save the VF's own MAC address *at all*
when using it for hostdev assignment, because we had already unbound
the VF from the host net driver prior to saving its config. With the
previous patch, that problem has been solved, so we now have the VF's
MAC address saved and can move on to the *next* problem, which is twofold:
1) during teardown we restore the config before we've re-bound, so the
VF doesn't have a net driver, and thus we can't set its MAC address
directly.
2) even if we delay restoring the config until the VF is bound to a
net driver, the request to set its MAC address would fail, since
(during device setup) we had set the "admin MAC" for the VF via an
RTM_SETLINK to the PF - once you've set the admin MAC for a VF, the
VF driver (either on host or on guest) is not allowed to change the
VF's MAC address "forever" (well, until you reload the PF driver,
but that requires destroying and recreating every single VF, which
isn't something you can require).
The solution is to keep the restoration of config at the same place,
but to set the *admin MAC* to the address you want the VF to have -
when the VF net driver is later initialized (as a part of re-binding
to the VF net driver) its MAC will be initialized to the current value
of the admin MAC.
In order to properly restore the original state of an SRIOV VF when
we're finished with it, we need to save the MAC address of the VF
itself (not just the admin MAC address for the VF that is stored in
the PF). But that can only be done when the VF is still bound to the
host's netdev driver, and we have always done the saving of device
config after the VF is already bound to vfio-pci. This patch prepares
us for adding a save of the VF's MAC by calling the function that
saves netconfig earlier in the device preparation, before we've
unbound it from the host netdev driver.
These two operations will need to be separated so that saving of the
original config is done before detaching the host net driver, and
setting the new config is done after attaching vfio-pci. This patch
splits the single function into two, but for now calls them together
(to make bisecting easier if there is a regression).
virHostdevNetConfigReplace() and virHostdevNetConfigRestore() are
modified to use the new virNetDev*NetConfig() functions.
Note that due to the VF's original MAC addresses being saved after it
has already been un-bound from the host net driver, the actual current
VF MAC address won't be saved (because it no longer exists) - only the
"admin MAC" will be saved. This reflects existing behavior that will
be fixed in an upcoming patch.
This patch modifies the macvtap passthrough setup to use
virNetDevSaveNetConfig()+virNetDevSetConfig() instead of
virNetDevReplaceNetConfig() or virNetDevReplaceMacAddress(), and the
teardown to use virNetDevReadNetConfig()+virNetDevSetConfig() instead
of virNetDevRestoreNetConfig() or virNetDevRestoreMacAddress().
Since the older functions only saved/restored the admin MAC and vlan
tag (which is incorrect) and the new functions save/restore the VF's
own MAC address and vlan tag (correct), this actually fixes a bug
(which was introduced by commit cb3fe38c7, which was itself supposed
to be a fix for https://bugzilla.redhat.com/1113474 ).
The downside to this patch is that it causes an *apparent* regression
in that bug (because there will once again be an error reported if the
interface had previously been used for VFIO device assignment), but in
reality, the code hasn't been working for *any* case before this
current patch (at least not with any recent kernel). Anyway, that
"regression" will be fixed with an upcoming patch that fixes it the
*right* way.
These three functions are destined to replace
virNetDev(Replace|Restore)NetConfig() and
virNetDev(Replace|Restore)MacAddress(), which both do the save and set
together as a single step. We need to separate the save, read, and set
steps because there will be situations where we need to do something
else in between (in particular, we will need to rebind a VF's driver
after save but before set).
This patch creates the new functions, but doesn't call them - that
will come in a subsequent patch. Note that the new functions to
read/write the file that stores the original network config now uses
JSON rather than plaintext (it still recognizes the old format as well
though, so it won't get confused during an upgrade).
The hyperv panic notifier reports additional data in form of 5 registers
that are reported in the crash event from qemu. Log them into the VM log
file and report them as a warning so that admins can see the cause of
crash of their windows VMs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426176
For certain kinds of panic notifiers (notably hyper-v) qemu is able to
report some data regarding the crash passed from the guest.
Make the data accessible to the callback in qemu so that it can be
processed further.
