virConf now honours a VIR_CONF_FLAG_LXC_FORMAT flag to handle LXC
configuration files. The differences are that property names can
contain '.' character and values are all strings without any bounding
quotes.
Provide a new virConfWalk function calling a handler on all non-comment
values. This function will be used by the LXC conversion code to loop
over LXC configuration lines.
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
virKModConfig() - Return a buffer containing kernel module configuration
virKModLoad() - Load a specific module into the kernel configuration
virKModUnload() - Unload a specific module from the kernel configuration
virKModIsBlacklisted() - Determine whether a module is blacklisted within
the kernel configuration
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable". So this patch also added notes
in formatdomain.html to declare the fact.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by". And
since it's only used in one place, we can safely removing the code
to find out the dev in the list first.
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there; And make
more sensible error w.r.t the current "shareable" value in
driver->activeScsiHostdevs.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
Signed-off-by: Osier Yang <jyang@redhat.com>
This reverts commit 2996e6be19
and some parts of 2636dc8c4d.
The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.
The latter one is the test for the previous one. Now none of them makes
sense.
1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html
Conflicts:
tests/virnetdevbandwidthtest.c: New test has been introduced since
then.
There are some units within libvirt that utilize virCommand API to run
some commands and deserve own unit testing. These units are, however,
not desired to be rewritten to dig virCommand API usage out. As a great
example virNetDevBandwidth could be used. The problem with the bandwidth
unit is: it uses virCommand API heavily. Therefore we need a mechanism
to not really run a command, but rather see its string representation
after which we can decide if the unit construct the correct sequence of
commands or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1055484
Currently, libvirt's XML schema of network allows QoS to be defined for
every network even though it has no bridge. For instance:
<network>
<name>vdsm-no-bridge</name>
<forward mode='passthrough'>
<interface dev='em1.10'/>
</forward>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='1000' burst='1024'/>
</bandwidth>
</network>
The bandwidth limitations can be, however, applied even on such
networks. In fact, they are going to be applied on the interface that
will be connected to the network on a domain startup. This approach,
however, has one limitation. With bridged networks, there are two points
where QoS can be set: bridge and domain interface. The lower limit of
the two is enforced then. For instance, if the interface has 10Mbps
average, but the network only 1Mbps, there's no way for interface to
transmit packets faster than the 1Mbps limit. With two points this is
enforced by kernel. With only one point, we must combine both QoS
settings into one which is set afterwards. Look at
virNetDevBandwidthMinimal() and you'll understand immediately what I
mean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unlike the host devices of other types, SCSI host device XML supports
"shareable" tag. This patch introduces it for the virSCSIDevice struct
for a later patch use (to detect if the SCSI device is shareable when
preparing the SCSI host device in QEMU driver).
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.
Depends on the capability exported in the first patch of the series.
Signed-off-by: Francesco Romani <fromani@redhat.com>
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,
we can use these interfaces to set up throttle
blkio cgroup for domain.
This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
In order to mirror a server with per-object filtering, the client
needs to track which server callbackID is servicing the client
callback. This patch introduces the notion of a serverID, as
well as the plumbing to use it for network events, although the
actual complexity of using per-object filtering in the remote
driver is deferred to a later patch.
* src/conf/object_event.h (virObjectEventStateEventID): Add parameter.
(virObjectEventStateQueueRemote, virObjectEventStateSetRemote):
New prototypes.
(virObjectEventStateRegisterID): Move...
* src/conf/object_event_private.h: ...here, and add parameter.
(_virObjectEvent): Add field.
* src/conf/network_event.h (virNetworkEventStateRegisterClient): New
prototype.
* src/conf/object_event.c (_virObjectEventCallback): Add field.
(virObjectEventStateSetRemote): New function.
(virObjectEventStateQueue): Make wrapper around...
(virObjectEventStateQueueRemote): New function.
(virObjectEventCallbackListCount): Tweak return count when remote
id matching is used.
(virObjectEventCallbackLookup, virObjectEventStateRegisterID):
Tweak registration when remote id matching will be used.
(virObjectEventNew): Default to no remote id.
(virObjectEventCallbackListAddID): Likewise, but set remote id
when one is available.
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Adjust return value when
remote id was set.
(virObjectEventStateEventID): Query existing id.
(virObjectEventDispatchMatchCallback): Require matching event id.
(virObjectEventStateCallbackID): Adjust caller.
* src/conf/network_event.c (virNetworkEventStateRegisterClient): New
function.
(virNetworkEventStateRegisterID): Update caller.
* src/conf/domain_event.c (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Update callers.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny)
(remoteConnectNetworkEventDeregisterAny)
(remoteConnectDomainEventDeregisterAny): Likewise.
(remoteEventQueue): Hoist earlier to avoid forward declaration,
and add parameter. Adjust all callers.
* src/libvirt_private.syms (conf/object_event.h): Drop function.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the host is configured with very restrictive firewall (default policy
is DROP for all chains, including OUTPUT), the bridge driver for Linux
adds netfilter entries to allow DHCP and DNS requests to go from the VM
to the dnsmasq of the host.
The issue that this commit fixes is the fact that a DROP policy on the OUTPUT
chain blocks the DHCP replies from the host’s dnsmasq to the VM.
As DHCP replies are sent in UDP, they are not caught by any --ctstate ESTABLISHED
rule and so, need to be explicitly allowed.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
While working on events, I found a number of minor issues; I'm
hoisting these to the front rather than doing it piecemeal in
the patches where I first noticed bad or missing documentation.
* src/conf/object_event.c: Fix grammar, document all parameters
of public functions, wrap some long lines.
* src/conf/object_event.h: Likewise.
* src/conf/network_event.c: Likewise.
* src/conf/domain_event.c: Likewise (except for the large number
of event creation functions).
* src/libvirt_private.cyms (conf/object_event.h): Split...
(conf/network_event.h): ...to account for new file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.
The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.
This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.
For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.
As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.
The previously fixed tests should make sure that we don't break stuff
that was working before.
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This gets rid of another stat() per volume, as well as cutting
bytes read in half, when populating the volumes of a directory
pool during a pool refresh. Not to mention that it provides an
interface that can let gluster pools also probe file types.
* src/util/virstoragefile.h (virStorageFileProbeFormatFromFD):
Delete.
(virStorageFileProbeFormatFromBuf): New prototype.
(VIR_STORAGE_MAX_HEADER): New constant, based on...
* src/util/virstoragefile.c (STORAGE_MAX_HEAD): ...old name.
(vmdk4GetBackingStore, virStorageFileGetMetadataInternal)
(virStorageFileProbeFormat): Adjust clients.
(virStorageFileProbeFormatFromFD): Delete.
(virStorageFileProbeFormatFromBuf): Export.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Adjust client.
* src/libvirt_private.syms (virstoragefile.h): Adjust exports.
Signed-off-by: Eric Blake <eblake@redhat.com>
Future patches will want to learn metadata about a file using
a buffer that was already parsed in order to probe the file's
format. Rather than reopening and re-reading the file, it makes
sense to separate getting file contents from actually parsing
those contents.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFDInternal): New functions.
(virStorageFileGetMetadataInternal): Hoist fstat() and read() into
callers.
(virStorageFileGetMetadataFromFD)
(virStorageFileGetMetadataRecurse): Rework clients.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
New prototype.
* src/libvirt_private.syms (virstoragefile.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our backing file chain code was not very robust to an ill-timed
EINTR, which could lead to a short read causing us to randomly
treat metadata differently than usual. But the existing
virFileReadLimFD forces an error if we don't read the entire
file, even though we only care about the header of the file.
So add a new virFile function that does what we want.
* src/util/virfile.h (virFileReadHeaderFD): New prototype.
* src/util/virfile.c (virFileReadHeaderFD): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileProbeFormatFromFD): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a function for efficiently checking if a path is a filesystem
mount point.
NB will not work for bind mounts, only true filesystem mounts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This makes virCPUx86DataAddCPUID, virCPUx86DataFree, and
virCPUx86MakeData available for direct usage outside of cpu driver in
tests and the new qemu monitor that will request the actual CPU
definition from a running qemu instance.
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Care must be taken accessing env variables when running
setuid. Introduce a virGetEnvAllowSUID for env vars which
are safe to use in a setuid environment, and another
virGetEnvBlockSUID for vars which are not safe. Also add
a virIsSUID helper method for any other non-env var code
to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds cpuDataFormat and cpuDataParse APIs to be used in unit
tests for testing APIs that deal with virCPUData. In the x86 world, this
means we can now store/load arbitrary CPUID data in the test suite to
check correctness of CPU related APIs that could not be tested before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The dbus_bus_get() function returns a shared bus connection that
all libraries in a process can use. You are forbidden from calling
close on this connection though, since you can never know if any
other code might be using it.
Add an option to use private dbus bus connections, if the app
wants to be able to close the connection.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
