Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch wraps it up all the wiring done in previous patches,
enabling a PPC64 guest to launch a guest using a TPM Proxy
device.
Note that device validation is already being done in qemu_validate.c,
qemuValidateDomainDeviceDefTPM(), on domain define time. We don't
need to verify QEMU capabilities for this device again inside
qemu_command.c.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Previous patch handled the conversion of def->tpm to the
array def->tpms and the XML parsing logic. This patch handles
the validations needed to ensure the intended behavior.
The existing qemuValidateDomainDeviceDefTPM() function was updated
to guarantee that the VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY model is
exclusive to PPC64 guests and to the VIR_DOMAIN_TPM_TYPE_PASSTHROUGH
backend.
A new function called qemuDomainDefTPMsPostParse() was added to guarantee
that the following combinations in the same domain are valid:
- a single TPM device
- a single TPM Proxy device
- a single TPM + single TPM Proxy devices
And these combinations in the same domain are NOT valid:
- 2 or more TPM devices
- 2 or more TPM Proxy devices
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuExtDevicesInitPaths() does not need 'ret'.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.1.0 introduced a new device type called TPM Proxy, currently
implemented by PPC64 guests via a new virtual device called
'spapr-tpm-proxy' (see QEMU 0fb6bd073230 for more info).
The TPM Proxy device interacts with a TPM Resource Manager, a host
device capable of multiplexing the host TPM with multiple processes.
This allows multiple guests to access some TPM features at the
same time. Note that this mode of operation does not provide
full TPM features to be available for the guest - for that case
the guest still needs to assign a vTPM device (tpm-spapr for
PPC64 guests). Although redundant, there is currently no technical
limitation for a guest to assign both a vTPM and a TPM Proxy at the
same time.
This patch adds documentation and schema for a new TPM model
type called 'spapr-tpm-proxy' that creates this new TPM Proxy
device. This model is valid only for the 'passthrough' backend.
An example of a TPM Proxy device connected to a TPM Resource Manager
'/dev/tpmrm0' will look like this:
<tpm model='spapr-tpm-proxy'>
<backend type='passthrough'>
<device path='/dev/tpmrm0'/>
</backend>
</tpm>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr() in qemuCaps to get rid of a virObjectUnref call,
a 'cleanup' label and the 'ret' pointer.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When building command line for IOMMU or machine, there are two
comments which mention function that validate IOMMU. But they
both refer to old name which was changed in v6.3.0-rc1~246.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Correct the log name for qemu_security.c to qemu.qemu_security
instead of qemu.qemu_process.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Additionally this removes duplicated call of the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The build job for this container has been failing every single
time, and as it turns out the explanation for that is very simple:
Debian is just not going to support the mips architecture going
forward.
Reported-by: Pino Toscano <ptoscano@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The bitmap name used for the incremental backup would be leaked
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the function was cleaning up a failed job only but now
there's other stuff that needs to be cleared too.
Make only steps which clean up after a failed job depend on the
'started' field and execute the rest of the code always.
This fixes a leak of the backup job tracking object and the blockdev-add
helper data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code would repeatedly mark the first disk's blockjob as started
rather than accessing all the blockjobs. Fix the dereferencing operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two functions called in sequence both initialized the virStorageSource
backing 'store' leading to a memleak.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup path expects that 'def' is assigned to 'priv->backup', but
that's not the case for early failures. Add a check to stop overwriting
of 'def' so that it can be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a block copy job fails prior to reaching the synchronized phase
while we are waiting for the job to finish virsh would print the
following:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
error:
Copy failed
The above message looks like we've forgot to print the error message
itself as the line ends after 'error:'. Unfortunately with the current
API design clients have no way of actually getting the error message as
the VIR_DOMAIN_EVENT_ID_BLOCK_JOB(_2) event only reports the status but
not an error and the job then vanishes.
Fix the expectations by using vshPrintExtra instead of vshError:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
Copy failed
Note that the newline is required to avoid printing the 'Copy failed'
message on the same line when printing the job progress percentage.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=1847867
Fix the same issue also for block pull and block commit job
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Outline the basics and how to integrate with externally created
overlays. Other topics will continue later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test both 'basic' and 'snapshots' cases on shallow and deep copy modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows the removal of the
ad-hoc implementation of bitmap merging for block copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Simulate commit between all the combinations of layers in the
'snapshots' case to see whether the code merges the correct bitmaps with
the correct depth of temporary bitmaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the 'basic' case we have few bitmaps in only the top layer. Simulate
commit into the backing of the top layer and also 2 levels deep.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removing the ad-hoc
implementation of bitmap merging for block commit. The new approach is
way simpler and more robust and also allows us to get rid of the
disabling of bitmaps done prior to the start as we actually do want to
update the bitmaps in the base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'snapshots' case has multiple layers so we need to make sure that
the bitmaps are merged with the appropriate temporary bitmaps formatted
from the allocation bitmap for any backing chain layer above.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'basic' case is just a single backing store layer containing the
bitmaps so we just copy the bitmaps over to the backup bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removal of the ad-hoc
implementation of bitmap merging for backup. The new approach is simpler
and also more robust in case some of the bitmaps break as they remove
the dependency on the whole chain of bitmaps working.
The new approach also allows backups if a snapshot is created outside of
libvirt.
Additionally the code is greatly simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a function which allows merging bitmaps according to the new
semantics and will allow replacing all the specific ad-hoc functions
currently in use for 'backup', 'block commit', 'block copy' and will
also be usable in the future for 'block pull' and non-shared storage
migration.
The semantics are a bit quirky for the 'backup' case but these quirks
are documented and will prevent us from having two slightly different
algorithms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Exercise the now arguably simpler checkpoint deletion code on the
'basic', 'snapshots', and 'synthetic' test data sets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've switched to the simple handling, the first thing that can
be massively simplified is checkpoint deletion. We now need to only go
through the backing chain and find the appropriately named bitmaps and
delete them, no complex lookups or merging.
Note that compared to other functions this deletes the bitmap in all
layers compared to others where we expect only exactly 1 bitmap of a
name in the backing chain to prevent potential problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
