To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
There is no need to acquire the driver-wide lock in
libxlDomainDefineXML. When switching to jobs in the libxl
driver, most driver-wide locks were removed. The locking here
was preserved since I mistakenly thought virDomainObjListAdd
needed protection. This is not the case, so remove the
unnecessary locking.
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.
'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG' was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
During migration, the libxl driver starts a modify job in the
begin phase, ending the job in the confirm phase. This is
essentially VIR_MIGRATE_CHANGE_PROTECTION semantics, but the
driver does not support that flag. Without CHANGE_PROTECTION
support, the job would never be terminated in error conditions
where migrate confirm phase is not executed. Further attempts
to modify the domain would result in failure to acquire a job
after LIBXL_JOB_WAIT_TIME.
Similar to the qemu driver, end the job in the begin phase.
Protecting the domain object across all phases of migration can
be done in a future patch adding CHANGE_PROTECTION support.
In libxlDomainMigrationPrepare(), a new virDomainObj is created
from the incoming domain def and added to the driver's domain
list, but never removed if there are subsequent failures during
the prepare phase.
targethost# virsh list --all
sourcehost# virsh migrate --live dom xen+ssh://targethost/system
error: operation failed: Fail to create socket for incoming migration.
targethost# virsh list --all
error: Failed to list domains
error: name in virGetDomain must not be NULL
After adding code to remove the domain on prepare failure, noticed
that libvirtd crashed due to double free of the virDomainDef. Similar
to the qemu driver, pass a pointer to virDomainDefPtr so it can be set
to NULL once a virDomainObj is created from it.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
libxl does not support save, restore, or migrate on all architectures,
notably ARM. Detect whether libxl supports these operations using
LIBXL_HAVE_NO_SUSPEND_RESUME. If not supported, drop advertisement of
<migration_features>.
Found by Ian Campbell while improving Xen's OSSTEST infrastructure
http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html
This simplifies the usage in {libxl,qemu}DomainGetNumaParameters
and it's needed for consistent error reporting in virBitmapFormat.
Also remove the forgotten ATTRIBUTE_NONNULL marker.
This patch adds initial migration support to the libxl driver,
using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration
functions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To allow the test suite to creat the XML option object,
move the virDomainXMLOptionNew call into a libxlCreateXMLConf
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With xend on the way out, installations may not even have
/usr/sbin/xend, which results in the following error when the
drivers are probed
2014-04-28 18:21:19.271+0000: 22129: error : virCommandWait:2426 :
internal error: Child process (/usr/sbin/xend status) unexpected exit
status 127: libvirt: error : cannot execute binary /usr/sbin/xend:
No such file or directory
Check for existence of /usr/sbin/xend before trying to run it with
the 'status' option.
Currently the driver only exposes the ability to connect to the serial console
of a Xen guest, which doesn't work for a PV guest. Since for an HVM guest the
serial devices are duplicated as consoles it is sufficient to just use the
console devices unconditionally.
Tested with the following bit of config XML:
<domain type='xen'>
...
<devices>
<console type='pty'>
<target type='xen'/>
</console>
</devices>
</domain>
I have observed and tested this on ARM but I believe it also applies to x86 PV
guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Clark Laughlin <clark.laughlin@linaro.org>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.
This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit d9f19c30d0 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().
This causes the daemon to fail on systems that have not had the directory
created before.
Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Part of a series of cleanups to use new accessor methods.
* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the domain event handler and shutdown thread out of the main
driver module and into libxl_domain module
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Include a pointer to the libxl driver in libxlDomainObjPrivate
object so it can be used in the domain event handler and
shutdown thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmStart from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules. For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxl driver reads /proc/xen/capabilities to see if it
is on a Dom0 kernel. If that file does not even exist though,
an error is logged. Check for the file existance before trying
to read its contents to avoid the log message.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
As soon as any guest mounts xenfs to /proc/xen, there is a capabilities
file in that directory. However it returns nothing when reading from it.
Change the test to actually check the contents of the file.
BugLink: http://bugs.launchpad.net/bugs/1248025
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Supporting sexpr in connectDomainXMLFromNative in the libxl driver
adds flexibility for users importing legacy Xen configuration into
libvirt. E.g. this patch allows importing previous xend-managed
domains from /var/lib/xend/domains/<dom-uuid>/config.sxp into the
libvirt libxl driver.
The shutdown handler may restart a domain when handling a reboot
event or when <on_*> is set to 'restart'. Restarting consists of
calling libxlVmCleanup followed by libxlVmStart. libxlVmStart will
emit a VIR_DOMAIN_EVENT_STARTED event, but the SHUTDOWN event is
not emitted until exiting the shutdown handler, after the STARTED
event.
This patch changes the logic a bit to queue the event at the start
of the shutdown action, ensuring it is queued before any subsequent
events that may be generated while executing the shutdown action.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver was ignoring the <on_*> domain event configuration,
causing e.g. a domain to be rebooted even when on_reboot is set to
destroy.
This patch honors the <on_*> configuration in the shutdown event
handler.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Dumping a domain's core can take considerable time. Use the
recently added job functions and unlock the virDomainObj while
dumping core.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Saving domain memory and cpu state can take considerable time.
Use the recently added job functions and unlock the virDomainObj
while saving the domain.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When explicitly destroying a domain (libxlDomainDestroyFlags), or
handling an out-of-band domain shutdown event, cleanup the domain
in the context of a job. Introduce libxlVmCleanupJob to wrap
libxlVmCleanup in a job block.
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function, which only has five call sites, simply calls
libxl_domain_destroy and libxlVmCleanup. Call those functions
directly at the call sites, allowing more control over how a
domain is destroyed and cleaned up. This patch maintains the
existing semantic, leaving changes to a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A small fix for the possiblitiy of jumping to an error path before
registering for domain events, preventing receiving important ones
like shutdown and death.
libxlDomainRestoreFlags acquires the driver lock while reading the
domain config from the save file and adding it to
libxlDriverPrivatePtr->domains. But virDomainObjList provides
self-locking APIs, so remove the needless driver locking.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Handling the domain shutdown event within the event handler seems
a bit unfair to libxl's event machinery. Domain "shutdown" could
take considerable time. E.g. if the shutdown reason is reboot,
the domain must be reaped and then started again.
Spawn a shutdown handler thread to do this work, allowing libxl's
event machinery to go about its business.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Due to some misunderstanding of requirements libxl places on timer
handling, I introduced the half-brained idea of maintaining a list
of timeouts that the driver could force to expire before freeing a
libxlDomainObjPrivate (and hence libxl_ctx). But testing all
the latest versions of Xen supported by the libxl driver (4.2.3,
4.3.1, 4.4.0 RC3), I see that libxl will handle this just fine and
there is no need to force expiration behind libxl's back. Indeed it
may be harmful to do so.
This patch removes the timer list, allowing libxl to handle cleanup
of its timer registrations.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.
While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.
I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction. It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request. Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.
I audited all commands that are marked as conditionally using a
guest agent. Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.
* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since ACL filtering was added in commit 7639736 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends. We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.
Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08 (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration. But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access. The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global. Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.
Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.
* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
By actually removing the <vcpupin> element (from within the
<cputune> section) from the XML, rather than jus update it with
a fully set vcpu affinity mask.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
And use it to implement libxlDomainPinVcpu(), similarly to what
happens in the QEMU driver. This way, it is possible to both
query and change the vcpu affinity of a persistent but not
running domain.
In face, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpupin fedora20_64 0 2-4 --current
error: this function is not supported by the connection driver: virDomainPinVcpuFlags
After (same situation as above):
# virsh vcpupin fedora20_64 0 2-4 --current
# virsh vcpupin fedora20_64 0
VCPU: CPU Affinity
----------------------------------
0: 2-4
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
So that it is possible to query vcpu related information of
a persistent but not running domain, like it is for the QEMU
driver.
In fact, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpuinfo fedora20_64
error: this function is not supported by the connection driver: virDomainGetVcpuPinInfo
After (same situation as above, i.e., fedora20_64 not running):
# virsh vcpuinfo fedora20_64
VCPU: 0
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
VCPU: 1
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:
# ./daemon/libvirtd -v
*** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
/lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
/home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
/home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
/lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
/lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: Dario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Starting from commit 2e82c18c in Xen (will be included in Xen 4.4)
both libxl_get_max_cpus() and libxl_get_max_nodes() start returning
a proper libxl error code, in case of failure. This patch fixes
this in the libxl driver.
Note that, although it is now basically impossible for them to return
0, that would, theoretically, still be wrong. Also, checking that the
returned value is '<= 0' makes the code correct for both Xen 4.4 and
Xen 4.3 (and 4.2), and that is why we go for it (rather than
just '< 0').
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/libxl/libxl_driver.c: Consistently use commas.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenxs/xen_sxpr.c: Likewise.
* src/xenxs/xen_xm.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
ifdef LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS hides a multi-line body
for a brace-less else. Add braces to ensure proper logic is applied.
Without this fix, new domains cannot be started. Both
libxl_domain_create_new and libxl_domain_create_restore are called when
starting a new domain leading to this error:
libxl: error: libxl.c:324:libxl__domain_rename: domain with name "guest" already exists.
libxl: error: libxl_create.c:800:initiate_domain_create: cannot make domain: -6
Rather than casting the virBitmap pointer to uint8_t* and then using
the structure contents as a byte array, use the virBitmap API to determine
the bitmap size and test each bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
in recently xen commit: 7051d5c8, there is a api changes in
libxl_domain_create_restore.
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Thu Oct 10 12:23:10 2013 +0100
tools/migrate: Fix regression when migrating from older version of Xen
use the macro LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS in libxl.h
in order to make libvirt could compile with old and new xen.
the params checkpointed_stream is useful if libvirt libxl driver
support migration. for new, set it as zero.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
According to the following valgrind output, there seems to be a
invalid limit for the iterator (captured on Fedora 19):
==3945== Invalid read of size 1
==3945== at 0x1E1FA410: libxlVmStart (libxl_driver.c:475)
==3945== by 0x1E1FAD9A: libxlDomainCreateWithFlags (libxl_driver.c:2633)
==3945== by 0x5187D46: virDomainCreate (libvirt.c:9439)
==3945== by 0x13BAA6: remoteDispatchDomainCreateHelper (remote_dispatch.h:2910)
==3945== by 0x51DE5B9: virNetServerProgramDispatch (virnetserverprogram.c:435)
==3945== by 0x51D93E7: virNetServerHandleJob (virnetserver.c:165)
==3945== by 0x50F5BF4: virThreadPoolWorker (virthreadpool.c:144)
==3945== by 0x50F5670: virThreadHelper (virthreadpthread.c:161)
==3945== by 0x8046C52: start_thread (pthread_create.c:308)
==3945== by 0x8758E1C: clone (clone.S:113)
==3945== Address 0x23424d81 is 0 bytes after a block of size 1 alloc'd
==3945== at 0x4A08121: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3945== by 0x50B1F8C: virAllocN (viralloc.c:189)
==3945== by 0x1E1FA3CA: libxlVmStart (libxl_driver.c:468)
==3945== by 0x1E1FAD9A: libxlDomainCreateWithFlags (libxl_driver.c:2633)
==3945== by 0x5187D46: virDomainCreate (libvirt.c:9439)
==3945== by 0x13BAA6: remoteDispatchDomainCreateHelper (remote_dispatch.h:2910)
==3945== by 0x51DE5B9: virNetServerProgramDispatch (virnetserverprogram.c:435)
==3945== by 0x51D93E7: virNetServerHandleJob (virnetserver.c:165)
==3945== by 0x50F5BF4: virThreadPoolWorker (virthreadpool.c:144)
==3945== by 0x50F5670: virThreadHelper (virthreadpthread.c:161)
==3945== by 0x8046C52: start_thread (pthread_create.c:308)
==3945== by 0x8758E1C: clone (clone.S:113)
==3945==
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1013045
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
No need to check if privileged when reading hostsysinfo, since
that check was already done in libxlDriverShouldLoad(). The
libxl driver fails to load if not privileged.
John Ferlan reported the following Coverity warning:
In libxlDomainCoreDump() Coverity has noted a FORWARD_NULL reference:
2004 if ((flags & VIR_DUMP_CRASH) && !vm->persistent) {
2005 virDomainObjListRemove(driver->domains, vm);
(20) Event assign_zero: Assigning: "vm" = "NULL".
Also see events: [var_deref_model]
2006 vm = NULL;
2007 }
2008
2009 ret = 0;
2010
2011 cleanup_unpause:
(21) Event var_deref_model: Passing null pointer "vm" to function
"virDomainObjIsActive(virDomainObjPtr)", which dereferences it. [details]
Also see events: [assign_zero]
2012 if (virDomainObjIsActive(vm) && paused) {
2013 if (libxl_domain_unpause(priv->ctx, dom->id) != 0) {
2014 virReportError(VIR_ERR_INTERNAL_ERROR,
Removing the vm from domain obj list and setting it to NULL can be
done in the previous 'if (flags & VIR_DUMP_CRASH)' conditional. Fix
the Coverity warning by ensuring vm is not NULL before testing if it
is still active.
Now that most fields of libxlDriverPrivate struct are immutable
or self-locking, there is no need to acquire the driver lock in
much of the libxl driver.
The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.
libxlDomainGetInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain. Switch to using the per-domain
libxl ctx.
libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object. Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().
Detect early on in libxl driver initialization if the driver
should be loaded at all, avoiding needless initialization steps
that only have to be undone later. While at it, move the
detection to a helper function to improve readability.
After detecting that the driver should be loaded, subsequent
failures such as initializing the log stream, allocating libxl
ctx, etc. should be treated as failure to initialize the driver.
Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files. This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.
More fallout from commit d72ef888. When reconnecting to running
domains, the libxl_ctx in libxlDomainObjPrivate was used before
initializing it, causing a segfault in libxl and consequently
crashing libvirtd.
Initialize the libxlDomainObjPrivate libxl_ctx in libxlReconnectDomain,
and while at it use this ctx in libxlReconnectDomain instead of the
driver-wide ctx.
There is a potential leak of a newly created libxlDomainObjPrivate
when subsequent allocation of the object's chrdev field fails.
Unref the object on such an error so that it is properly disposed.
Commit d72ef888 introduced a bug in the libxl driver that will
segfault libvirtd if libxl reports an error message, e.g. when
attempting to initialize the driver on a non-Xen system. I
assumed it was valid to pass a NULL logger to libxl_ctx_alloc(),
but that is not the case since any errors associated with the ctx
that are emitted by libxl will dereference the logger and crash
libvirtd.
Errors associated with the libxl driver-wide ctx could be useful
for debugging anyway, so create a 'libxl-driver.log' to capture
these errors.
introduced by cs 4b9eec50fe ("libxl: implement per
NUMA node free memory reporting"). What was wrong was that
libxl_get_numainfo() put in nr_nodes the actual number of
host NUMA nodes, not the highest node ID (like libnuma's
numa_max_node() does instead).
While at it, turn the failure of libxl_get_numainfo() from
a simple warning to a proper error, as requested during the
review of another patch of the original series.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Currently, only one log file is created by the libxl driver, with
all output from libxl for all domains going to this one file.
Create a per-domain log file based on domain name, making sifting
through the logs a bit easier. This required deferring libxl_ctx
allocation until starting the domain, which is fine since the
ctx is not used when the domain is inactive.
Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
this patch introduce the console api in libxl driver for both pv and
hvm guest. and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).
Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Although, having it depending on Xen >= 4.3 (by using the proper
libxl feature flag).
Xen currently implements a NUMA placement policy which is basically
the same as the 'interleaved' policy of `numactl', although it can
be applied on a subset of the available nodes. We therefore hardcode
"interleave" as 'numa_mode', and we use the newly introduced libxl
interface to figure out what nodes a domain spans ('numa_nodeset').
With this change, it is now possible to query the NUMA node
affinity of a running domain:
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// list
Id Name State
----------------------------------------------------
23 F18_x64 running
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// numatune 23
numa_mode : interleave
numa_nodeset : 1
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
domainGetNumaParameters has a string typed parameter, hence it
is necessary for the libxl driver to support this.
This change implements the connectSupportsFeature hook for the
libxl driver, advertising that VIR_DRV_FEATURE_TYPED_PARAM_STRING
is supported.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Eric Blake <eblake@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use virDomainObjListRemoveLocked instead of virDomainObjListRemove, as
driver->domains is already taken by virDomainObjListForEach.
Above deadlock can be triggered when libvirtd is started after some
domain have been started by hand (in which case driver will not find
libvirt-xml domain config).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
By providing the implementation of nodeGetCellsFreeMemory for
the driver. This is all just a matter of properly formatting, in
a way that libvirt like, what Xen provides via libxl_get_numainfo().
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// freecell --all
0: 25004 KiB
1: 105848 KiB
--------------------
Total: 130852 KiB
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
libxl uses some xenstore entries for hints in memory management
(especially when starting new domain). This includes dom0 memory limit
and Xen free memory margin, based on current system state. Entries are
created at first function usage, so force such call at daemon startup,
which most likely will be before any domain startup.
Also prevent automatic memory management if dom0_mem= option passed to
xen hypervisor - it is known to be incompatible with autoballoon.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
When creating a timer/event handler reference counting is used. So it could
be possible (in theory) that libxlDomainObjPrivateFree is called with
reference counting >1. The problem is that libxlDomainObjPrivateFree leave
the object in an invalid state with ctx freed (but still having dandling
pointer). This can lead timer/event handler to core.
This patch implements a dispose method for libxlDomainObjPrivate, and moves
freeing the libxl ctx to the dispose method, ensuring the ctx is valid while
the object's reference count is > 0.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Currently, the libxl driver reports a connection type of "xenlight".
To be compatible with the legacy Xen driver, it should return "Xen".
Note: I noticed this while testing the libxl driver on OpenStack.
After switching my Xen compute nodes to use the libxl stack, I
could no longer launch instances on those nodes since
hypervisor_type was reported as "xenlight" instead of "xen".
libxl expects the event handler to free the event passed to it. From
libxl_event.h:
event becomes owned by the application and must be freed, either
by event_occurs or later
Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const. Detect this and
define the libvirt libxl event handler signature appropriately.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
The LXC, QEMU, and LibXL drivers have all merged their handling of
the attach/update/modify device APIs into one large
'xxxxDomainModifyDeviceFlags'
which then does a 'switch()' based on the actual API being invoked.
While this saves some lines of code, it is not really all that
significant in the context of the driver API impls as a whole.
This merger of the handling of different APIs creates pain when
wanting to automated analysis of the code and do things which
are specific to individual APIs. The slight duplication of code
from unmerged the API impls, is preferrable to allow for easier
automated analysis.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
this patch fix the wrong sequence for fd and timeout register. the sequence
was right in dfa1e1dd for fd register, but it changed in e0622ca2.
in this patch, set priv, xl_priv in info and increase info->priv ref count
before virEventAddHandle. if do this after virEventAddHandle, the fd
callback or fd deregister maybe got the empty priv, xl_priv or wrong ref
count.
after apply this patch, test more than 100 rounds passed compare to fail
within 3 rounds without this patch. each round includes define -> start ->
destroy -> create -> suspend -> resume -> reboot -> shutdown -> save ->
resotre -> dump -> destroy -> create -> setmem -> setvcpus -> destroy.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
1. The virObjectLock() call was unconditional, but Unlock was conditional
on vm being valid. Removed the check
2. A call to virDomainEventNewFromObj() isn't guaranteed to return an
event - that check needs to be made prior to libxlDomainEventQueue()
of the event. Did not add libxlDriverLock/Unlock around the call since
some callers already have lock taken
3. Need to initialize fd = -1 in libxlDoDomainSave() since we can jump
to cleanup before it's set.
4. Missing break;'s in libxlDomainModifyDeviceFlags() for case
LIBXL_DEVICE_UPDATE. The default: case would report an error
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.
This pair, used in virDomainCreateXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainRestoreFlags:
if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, true)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
NULL)))
goto cleanup;
This pair, used in virDomainDefineXML:
if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
goto cleanup;
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def, false)))
goto cleanup;
Changes to
if (!(dom = virDomainObjListAdd(privconn->domains,
privconn->caps,
def,
0, NULL)))
goto cleanup;
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Since libxl provides the domain ID in the event handler callback,
find the domain object based on the ID. This approach prevents
processing the callback on a domain that has already been reaped.
Also, similar to the xl implementation, ignore the SUSPEND shutdown
reason. By calling libxl_domain_suspend(), we know a shutdown
event with SUSPEND reason will be generated, but it can be safely
ignored since any subsequent cleanup will be done by the callers.
libxlDoDomainSave() was removing non-persistent domains, but
required callers to have the virDomainObj locked. Callers could
potentially unlock an already freed virDomainObj. Move this
logic to the callers of libxlDoDomainSave().
I've noticed that libxl can invoke timeout reregister/modify hooks
after returning from libxl_ctx_free. Explicitly remove the
timeouts before freeing the libxl ctx to avoid executing hooks on
stale objects.
It is possible to destroy and cleanup a VM, resulting in freeing the
libxlDomainObjPrivate object and associated libxl ctx, before all fds and
timeouts have been deregistered and destroyed.
Fix this race by incrementing the reference count on libxlDomainObjPrivate
for each fd and timeout registration. Only when all fds and timeouts are
deregistered and destroyed will the libxlDomainObjPrivate be destroyed.
The libxl driver is racy in it's interactions with libxl and libvirt's
event loop. The event loop can invoke callbacks after libxl has
deregistered the event, and possibly access freed data associated with
the event.
This patch fixes the race by converting libxlDomainObjPrivate to a
virObjectLockable, and locking it while executing libxl upcalls and
libvirt event loop callbacks.
Note that using the virDomainObj lock is not satisfactory since it may
be desirable to hold the virDomainObj lock even when libxl events such
as reading and writing to xenstore need processed.
xen-unstable changeset 26469 makes changes wrt modifying and deregistering
timeouts.
First, timeout modify callbacks will only be invoked with an
abs_t of {0,0}, i.e. make the timeout fire immediately. Prior to this
commit, timeout modify callbacks were never invoked.
Second, timeout deregister hooks will no longer be called.
This patch makes changes in the libvirt libxl driver that should be
compatible before and after changeset 26469.
While at it, fix a potential overflow in the timeout register callback.
Commit dfa1e1dd added functions whose definitions do not conform
to the style used in the libxl driver. Change these functions to
be consistent throughout the driver.
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Based on a patch originally authored by Daniel De Graaf
http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html
This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl. Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.
For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
This patch stores existence of the image in the object. At start of the
daemon the state is checked and then updated in key moments in domain
lifecycle.
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt always adds -Werror-frame-larger-than=4096 to the flags when
it builds. When building on Fedora 17, two functions with multiple
1024 buffers declared inside if {} blocks would generate frame size
errors; apparently the version of gcc on Fedora 16 will merge these
multiple buffers into a single buffer even when optimization is off,
but Fedora 17 won't.
The fix is to declare a single 1024 buffer at the top of the two
offending functions, and reuse the single buffer throughout the
functions.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
This call to virDomainDeviceDefParse is both unnecessary (since
it will again be called at the top of the immediately following if(),
and if not there, then at the top of the if following that), but it
also creates a leak of one virDomainDeviceDef and one [whatever type
of device the DeviceDef is pointing to; probably a virDomainDiskDef]
in the case that the function has been called with
VIR_DOMAIN_DEVICE_MODIFY_CONFIG (the second parse will overwrite the
devicedef that was just created).
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
virFileOpenAs previously would only try opening a file as the current
user, or as a different user, but wouldn't try both methods in a
single call. This made it cumbersome to use as a replacement for
open(2). Additionally, it had a lot of historical baggage that led to
it being difficult to understand.
This patch refactors virFileOpenAs in the following ways:
* reorganize the code so that everything dealing with both the parent
and child sides of the "fork+setuid+setgid+open" method are in a
separate function. This makes the public function easier to understand.
* Allow a single call to virFileOpenAs() to first attempt the open as
the current user, and if that fails to automatically re-try after
doing fork+setuid (if deemed appropriate, i.e. errno indicates it
would now be successful, and the file is on a networkFS). This makes
it possible (in many, but possibly not all, cases) to drop-in
virFileOpenAs() as a replacement for open(2).
(NB: currently qemuOpenFile() calls virFileOpenAs() twice, once
without forking, then again with forking. That unfortunately can't
be changed without at least some discussion of the ramifications,
because the requested file permissions are different in each case,
which is something that a single call to virFileOpenAs() can't deal
with.)
* Add a flag so that any fchown() of the file to a different uid:gid
is explicitly requested when the function is called, rather than it
being implied by the presence of the O_CREAT flag. This just makes
for less subtle surprises to consumers. (Commit
b1643dc15c added the check for O_CREAT
before forcing ownership. This patch just makes that restriction
more explicit.)
* If either the uid or gid is specified as "-1", virFileOpenAs will
interpret this to mean "the current [gu]id".
All current consumers of virFileOpenAs should retain their present
behavior (after a few minor changes to their setup code and
arguments).
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.
The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.
If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.
The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.
The demo for the bug is to run
while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done
prior to this fix, it will frequently hang and / or
crash, or corrupt memory
Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers
Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.
* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Remove all timer dispatch functions
When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Return count of callbacks when
registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
for change in APIs
Allow the user to call with nparams too small, per API documentation.
* src/libxl/libxl_driver.c
(libxlDomainGetSchedulerParametersFlags): Allow fewer than max.
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
Variable 'l_disk' initialized to a null pointer value, control jumps to 'case
VIR_DOMAIN_DISK_DEVICE_DISK and then taking false branch, Within the expansion
of the macro 'libxlError': Field access results in a dereference of a null
pointer (loaded from variable 'l_disk').
* src/libxl/libxl_driver.c: Field access results in a dereference of a null
pointer (loaded from variable 'l_disk')
Signed-off-by: Alex Jia <ajia@redhat.com>
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots. So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.
* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
If the libxl driver is compiled in, then everytime libvirtd
starts up on a non-Xen Dom0 host, it logs a error message.
Since this is an expected condition, we should not log at
'error' level, only 'info'.
* src/libxl/libxl_driver.c: Lower log level for certain
expected errors during driver init
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains. Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.
Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.
* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.
Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.
* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
For all hypervisors that support save and restore, the new API
now performs the same functions as the old.
VBox is excluded from this list, because its existing domainsave
is broken (there is no corresponding domainrestore, and there
is no control over the filename used in the save). A later
patch should change vbox to use its implementation for
managedsave, and teach start to use managedsave results.
* src/libxl/libxl_driver.c (libxlDomainSave): Move guts...
(libxlDomainSaveFlags): ...to new function.
(libxlDomainRestore): Move guts...
(libxlDomainRestoreFlags): ...to new function.
* src/test/test_driver.c (testDomainSave, testDomainSaveFlags)
(testDomainRestore, testDomainRestoreFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSave)
(xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore)
(xenUnifiedDomainRestoreFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore):
Rename and move guts.
(qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore)
(qemuDomainRestoreFlags): ...here.
(qemudDomainSaveFlag): Rename...
(qemuDomainSaveInternal): ...to this, and update callers.
* src/libxl/libxl_driver.c: New callback for libxl_driver,
new function libxlDomainUndefineFlags, and changes libxlDomainUndefine
as a wrapper of libxlDomainUndefineFlags.
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated. In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.
* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Based on the equivalent qemu driver code
* src/libxl/libxl_driver.c: refactor the Start save and restore
routines of the driver and adds the new entry points for
managed saves handling
Add support to set the maximum memory of the domain.
Also add support to change the memory of the current
state of the domain, which translates to a running
domain or the config of the domain.
Based on the code from the qemu driver.
v3:
* initialize xml pointer to avoid segfault
* throw error message if domain is paused as
libxenlight itself will pause it
v2:
* header is now padded and has a version field
* the correct restore function from libxl is used
* only create the restore event once in libxlVmStart
This patch fixes the population of the
libxenlight data structures. Now the devices
should be removed correctly from the xenstore
if they are detached.
Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.
For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.
* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.
Based on the device attach/detach code from the QEMU driver,
but using the new functions to create the structures associated.
* src/libxl/libxl_driver.c: implements domainAttachDevice,
domainAttachDeviceFlags, domainDetachDevice, domainDetachDeviceFlags
and domainUpdateDeviceFlags
Clang couldn't quite see that the same condition of
(flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that
the second block is guaranteed that def was assigned in
the first block.
* src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint
for clang.
Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).
Add subset handling to libxl and test drivers.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
