This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.
Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
If libnuma is not compiled in, or numa_available() returns an
error, stub out fake NUMA info consisting of one NUMA cell
containing all CPUs and memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Not all kernel builds have any entries under the location
/sys/devices/system/cpu/cpu0/topology. We already cope with
that being missing in some cases, but not all. Update the
code which looks for thread_siblings to cope with the missing
file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Raspberry Pi runs the armv6l architecture and apparently
people are trying to run libvirt LXC on it. So we should allow
that as a valid arch
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.
sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
sysinfotest_run(const char *test,
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nodedev driver currently only detects harddisk, cdrom
and floppy devices. This adds support for SD cards, which
are common storage for ARM devices, eg the Google ChromeBook
<device>
<name>block_mmcblk0_0xb1c7c08b</name>
<parent>computer</parent>
<capability type='storage'>
<block>/dev/mmcblk0</block>
<drive_type>sd</drive_type>
<serial>0xb1c7c08b</serial>
<size>15758000128</size>
<logical_block_size>512</logical_block_size>
<num_blocks>30777344</num_blocks>
</capability>
</device>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit c9c87376f2.
Now that we force all containers to have a root filesystem,
there is no way the host's /dev is ever exposed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the LXC container code has two codepaths, depending on
whether there is a <filesystem> element with a target path of '/'.
If we automatically add a <filesystem> device with src=/ and dst=/,
for any container which has not specified a root filesystem, then
we only need one codepath for setting up the filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Early on kernel support for private devpts was not widespread,
so we had compatibiltiy codepaths. Such old kernels are not
seriously used for LXC these days, so the compat code can go
away
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating a logical volume with virStorageVolCreateXMLFrom,
"qemu-img convert" is called internally if clonevol is a file volume.
Then, vol->target.format is used as output_fmt parameter but the
target.format of logical volumes is always 0 because logical volumes
haven't the volume format type element.
Fortunately, 0 was treated as RAW file format before commit f772b3d9,
so there was no problem. But now, 0 is treated as the type of none,
qemu-img fails with "Unknown file format 'none'".
This patch fixes this issue by treating output block devices as RAW
file format like for input block devices.
Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
otherwise we crash later on if we don't find a match like:
#0 0xb72c2b4f in virSecurityManagerGenLabel (mgr=0xb8e42d20, vm=0xb8ef40c0) at security/security_manager.c:424
#1 0xb18811f3 in qemuProcessStart (conn=conn@entry=0xb8eed880, driver=driver@entry=0xb8e3b1e0, vm=vm@entry=0xb8ef58f0,
migrateFrom=migrateFrom@entry=0xb18f6088 "stdio", stdin_fd=18,
stdin_path=stdin_path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img", snapshot=snapshot@entry=0x0,
vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_RESTORE, flags=flags@entry=2) at qemu/qemu_process.c:3364
#2 0xb18d6cb2 in qemuDomainSaveImageStartVM (conn=conn@entry=0xb8eed880, driver=driver@entry=0xb8e3b1e0, vm=0xb8ef58f0, fd=fd@entry=0xb6bf3f98,
header=header@entry=0xb6bf3fa0, path=path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img",
start_paused=start_paused@entry=false) at qemu/qemu_driver.c:4843
#3 0xb18d7eeb in qemuDomainRestoreFlags (conn=conn@entry=0xb8eed880,
path=path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img", dxml=dxml@entry=0x0, flags=flags@entry=0)
at qemu/qemu_driver.c:4962
#4 0xb18d8123 in qemuDomainRestore (conn=0xb8eed880, path=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img")
at qemu/qemu_driver.c:4987
#5 0xb718d186 in virDomainRestore (conn=0xb8eed880, from=0xb8ea87d8 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img") at libvirt.c:2768
#6 0xb7736363 in remoteDispatchDomainRestore (args=<optimized out>, rerr=0xb6bf41f0, client=0xb8eedaf0, server=<optimized out>, msg=<optimized out>)
at remote_dispatch.h:4679
#7 remoteDispatchDomainRestoreHelper (server=0xb8e1a3e0, client=0xb8eedaf0, msg=0xb8ee72c8, rerr=0xb6bf41f0, args=0xb8ea8968, ret=0xb8ef5330)
at remote_dispatch.h:4661
#8 0xb720db01 in virNetServerProgramDispatchCall (msg=0xb8ee72c8, client=0xb8eedaf0, server=0xb8e1a3e0, prog=0xb8e216b0)
at rpc/virnetserverprogram.c:439
#9 virNetServerProgramDispatch (prog=0xb8e216b0, server=server@entry=0xb8e1a3e0, client=0xb8eedaf0, msg=0xb8ee72c8) at rpc/virnetserverprogram.c:305
#10 0xb7206e97 in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>, client=<optimized out>, srv=0xb8e1a3e0) at rpc/virnetserver.c:162
#11 virNetServerHandleJob (jobOpaque=0xb8ea7720, opaque=0xb8e1a3e0) at rpc/virnetserver.c:183
#12 0xb70f9f78 in virThreadPoolWorker (opaque=opaque@entry=0xb8e1a540) at util/virthreadpool.c:144
#13 0xb70f94a5 in virThreadHelper (data=0xb8e0e558) at util/virthreadpthread.c:161
#14 0xb705d954 in start_thread (arg=0xb6bf4b70) at pthread_create.c:304
#15 0xb6fd595e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130
This unbreaks libvirt-tck's domain/100-transient-save-restore.t with
qemu:///session and selinux compiled in but disabled.
Introduced by 8d68cbeaa8
Commit f84b92ea introduced a memory leak on error; John Ferlan reported
that valgrind caught it during 'make check'.
* src/qemu/qemu_command.c (qemuBuildMachineArgStr): Plug leak.
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The JSON generator is able to represent only values less than LLONG_MAX, fix the
bandwidth limit checks when converting to value to catch overflows before they
reach the generator.
Every source file is currently built twice by libtool, once for
the shared library and once for the static library. Static libs
are not commonly packaged by distros and slow down compilation
time by more than 50% compared to a shared-only build time.
Time for 'make -j 4':
shared only: 2 mins 9 secs
shared + static: 3 mins 26 secs
Time for non-parallel make
shared only: 3 mins 32 secs
shared + static: 5 mins 41 secs
Those few people who really want them, can pass --enable-static
to configure
Disabling them by default requires use of LT_INIT, but for
compat with RHEL5 we can't rely on that. So we conditionally
use LT_INIT, but fallback to AM_PROG_LIBTOOL if not present.
https://bugzilla.redhat.com/show_bug.cgi?id=947387
If a user configures a domain to use a seclabel of a specific type,
but the appropriate driver is not accessible, we should refuse to
start the domain. For instance, if user requires selinux, but it is
either non present in the system, or is just disabled, we should not
start the domain. Moreover, since we are touching only those labels we
have a security driver for, the other labels may confuse libvirt when
reconnecting to a domain on libvirtd restart. In our selinux example,
when starting up a domain, missing security label is okay, as we
auto-generate one. But later, when libvirt is re-connecting to a live
qemu instance, we parse a state XML, where security label is required
and it is an error if missing:
error : virSecurityLabelDefParseXML:3228 : XML error: security label
is missing
This results in a qemu process left behind without any libvirt control.
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:
virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0
Invalid scheduler options are reported as well. These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
Mimic the fix done in 02b9097274 to fix crash by
accessing an already freed structure. Also copy the explaining comment why the
pointer can't be accessed any more.
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted. A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.
This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.
Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
The domif-getlink command did not terminate successfully when the
interface state was found. As the code used old and too complex approach
to do the job, this patch refactors it and fixes the bug.
Format the address using the helper instead of having similar code in
multiple places.
This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa
* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
The 'virsh vcpupin' and 'virsh emulatorpin' commands use the same
code to parse the cpulist. This patch abstracts the same code as
a helper. Along with various code style fixes, and error improvement
(only error "Physical CPU %d doesn't exist" if the specified CPU
exceed the range, no "cpulist: Invalid format", see the following
for an example of the error prior to this patch).
% virsh vcpupin 4 0 0-8
error: Physical CPU 4 doesn't exist.
error: cpulist: Invalid format.
Code added by commit id '523207fe8'
TEST: qemuxml2argvtest
........................................ 40
........................................ 80
........................................ 120
........................................ 160
........................................ 200
........................................ 240
................................. 273 OK
==30993== 39 bytes in 1 blocks are definitely lost in loss record 33 of 87
==30993== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==30993== by 0x41E501: fakeSecretGetValue (qemuxml2argvtest.c:33)
==30993== by 0x427591: qemuBuildDriveURIString (qemu_command.c:2571)
==30993== by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993== by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993== by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993== by 0x41FE8F: virtTestRun (testutils.c:157)
==30993== by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993== by 0x4204CA: virtTestMain (testutils.c:719)
==30993== by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==30993==
==30993== 46 bytes in 1 blocks are definitely lost in loss record 64 of 87
==30993== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==30993== by 0x38D690A167: __vasprintf_chk (in /usr/lib64/libc-2.16.so)
==30993== by 0x4CB28E7: virVasprintf (stdio2.h:210)
==30993== by 0x4CB29A3: virAsprintf (virutil.c:2017)
==30993== by 0x4275B4: qemuBuildDriveURIString (qemu_command.c:2580)
==30993== by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993== by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993== by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993== by 0x41FE8F: virtTestRun (testutils.c:157)
==30993== by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993== by 0x4204CA: virtTestMain (testutils.c:719)
==30993== by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==30993==
==30993== 385 (56 direct, 329 indirect) bytes in 1 blocks are definitely los
==30993== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==30993== by 0x4C6B2CF: virAllocN (viralloc.c:152)
==30993== by 0x4C9C7EB: virObjectNew (virobject.c:191)
==30993== by 0x4D21810: virGetSecret (datatypes.c:642)
==30993== by 0x41E5D5: fakeSecretLookupByUsage (qemuxml2argvtest.c:51)
==30993== by 0x4D4BEC5: virSecretLookupByUsage (libvirt.c:15295)
==30993== by 0x4276A9: qemuBuildDriveURIString (qemu_command.c:2565)
==30993== by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993== by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993== by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993== by 0x41FE8F: virtTestRun (testutils.c:157)
==30993== by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993==
PASS: qemuxml2argvtest
Interesting side note is that running the test singularly via 'make -C tests
check TESTS=qemuxml2argvtest' didn't trip the valgrind error; however,
running during 'make -C tests valgrind' did cause the error to be seen.
Since the refactoring in fbe2d49 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=929045
When logical pool has no PVs associated with itself (user-created),
virCommandFree(cmd) is called twice with the same pointer and that
causes a segfault in daemon.
