When defining and creating networks, we have been checking to make
sure there is only a single "default" portgroup, but haven't verified
that no two portgroups have the same name. We *do* check for multiple
definitions when updating the portgroups in an existing network
though.
This patch adds a check to networkValidate(), which is called when a
network is defined or created, to disallow duplicate names. It would
actually make sense to do this in the network XML parser (since it's
not really "something that might make sense but isn't supported by
this driver", but is instead "something that should never be
allowed"), but doing that carries the danger of causing errors when
rereading the config of existing networks when libvirtd is restarted
after an upgrade, and that would result in networks disappearing from
libvirt's list. (I'm thinking I should change the error to "XML_ERROR"
instead of "UNSUPPORTED", even though that's not the type of error
that networkValidate is intended for)
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1115858
It is only usable for NETWORK and BRIDGE type interfaces.
Error out when trying to start a domain where the custom
tap device path is specified for interfaces of other types,
or when the daemon is not privileged.
Note that this cannot be checked at definition time, because
the comparison is against actual type.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
It is only supported for virtio adapters.
Silently drop it if it was specified for other models,
as is done for other virtio attributes.
Also mention this in the documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
It is often helpful to know which version of libvirt and QEMU
was present when a guest was first launched. Ensure this info
is written into the QEMU log file for each guest.
Commit id '652a2ec6' introduced two new node device capability flags
and the ability to use those flags as a way to search for a specific
subset of a 'scsi_host' device - namely a 'fc_host' and/or 'vports'.
The code modified the virNodeDeviceCapMatch whichs allows for searching
using the 'virsh nodedev-list [cap]' via virConnectListAllNodeDevices.
However, the original patches did not account for other searches for
the same capability key from virNodeDeviceNumOfCaps and virNodeDeviceListCaps
using nodeDeviceNumOfCaps and nodeDeviceListCaps. Since 'fc_host' and
'vports' are self defined bits of a 'scsi_host' device mere string
comparison against the basic/root type is not sufficient.
This patch adds the check for the 'fc_host' and 'vports' bits within
a 'scsi_host' device and allows the following python code to find the
capabilities for the device:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
devs = conn.listAllDevices()
for dev in devs:
if 'fc_host' in dev.listCaps() or 'vports' in dev.listCaps():
print dev.name(),dev.numOfCaps(),dev.listCaps()
Commit id '652a2ec6' introduced two new node device capability flags
and the ability to use those flags as a way to search for a specific
subset of a 'scsi_host' device - namely a 'fc_host' and/or 'vports'.
The code modified the virNodeDeviceCapMatch whichs allows for searching
using the 'virsh nodedev-list [cap]' via virConnectListAllNodeDevices.
However, the original patches did not account for other searches for
the same capability key from virNodeListDevices using virNodeDeviceHasCap.
Since 'fc_host' and 'vports' are self defined bits of a 'scsi_host'
device mere string comparison against the basic/root type is not
sufficient.
This patch adds the check for the 'fc_host' and 'vports' bits within
a 'scsi_host' device and allows the following python code to find the
capabilities for the device:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
fc = conn.listDevices('fc_host', 0)
print(fc)
fc = conn.listDevices('vports', 0)
print(fc)
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Add the missing jump to the error label when the uuid in the
migration cookie XML does not match the uuid of the migrated
domain.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If a storage file would be backed with a NBD device without path
(nbd://localhost) libvirt would crash when parsing the backing path for
the disk as the URI structure's path element is NULL in such case but
the NBD parser would access it shamelessly.
Add the missing jump to thje error label. The error message shouldn't
ever be triggered though as it's called only on pre-selected nodes.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.
Updated the man page to describe the new flag.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Commit b38da584 introduced two new functions to get a page size but it
won't work on Windows. We should take care of this.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit e562a61a introduced new function to get/set interface state but
there was misuse of ATTRIBUTE_NONNULL on non-pointer attributes and also
we need to wrap that functions by #ifdef to not break mingw build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
e562a61a07 added these two new helper functions and only used them
within virnetdev.c, but declared them in the .h file. If some
currently unsupported interface flags need to be accessed in the
future, it will make more sense to write the appropriate higher level
function rather than require us to artificially define IFF_* on some
mythical platform that doesn't have SIOC[SG]IFFLAGS (and therefore
doesn't have IFF_*) just so we can call virNetDevSetIFFFlags() to
return an error.
To help someone in not going down the wrong road, this patch makes the
two helper functions static, hopefully making it less likely that
someone will want to use them outside of virnetdev.c.
https://bugzilla.redhat.com/show_bug.cgi?id=1176510
When storageDriverAutostart is called path virStateReload via a 'service
libvirtd reload', then because the volume list in the pool wasn't cleared
prior to the call, each volume would be listed multiple times (as many
times as we reload). I believe the issue would be introduced by commit
id '9e093f0b' at least for the libvirtd reload path, although I suppose
the introduction of virStateReload (commit id '70da0494') could be a
different cause.
Thus like other places prior to calling refreshPool, we need to call
virStoragePoolObjClearVols
Change done by commit f309db1f4d wrongly
assumes that qemu can start with a combination of NUMA nodes specified
with the "memdev" option and the appropriate backends, and the legacy
way by specifying only "mem" as a size argument. QEMU rejects such
commandline though:
$ /usr/bin/qemu-system-x86_64 -S -M pc -m 1024 -smp 2 \
-numa node,nodeid=0,cpus=0,mem=256 \
-object memory-backend-ram,id=ram-node1,size=12345 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
qemu-system-x86_64: -numa node,nodeid=1,cpus=1,memdev=ram-node1: qemu: memdev option must be specified for either all or no nodes
To fix this issue we need to check if any of the nodes requires the new
definition with the backend and if so, then all other nodes have to use
it too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182467
With the new JSON to argv formatter we are now able to represent the
memory backend definitions in the JSON object format that is reusable
for monitor use (hotplug) and then convert it into the shell string.
This will avoid having two separate instances of the same code that
would create the different formats.
Previous refactors now allow to make this step without changes to the
test suite.
QEMU's command line visitor as well as the JSON interface take bytes by
default for memory object sizes. Convert mebibytes to bytes so that we
can later refactor the existing code for hotplug purposes.
QEMU's qapi visitor code allows yes/on/y for true and no/off/n for false
value of boolean properities. Unify the used style so that we can
generate it later and fix test cases.
Extract the memory backend device code into a separate function so that
it can be later easily refactored and reused.
Few small changes for future reusability, namely:
- new (currently unused) parameter for user specified page size
- size of the memory is specified in kibibytes, divided up in the
function
- new (currently unused) parameter for user specifed source nodeset
- option to enforce capability check
Unlike -device, qemu uses a JSON object to add backend "objects" via the
monitor rather than the string that would be passed on the commandline.
To be able to reuse code parts that configure backends for various
devices, this patch adds a helper that will allow generating the command
line representations from the JSON property object.
This helper eases iterating all key=value pairs stored in a JSON
object. Usually we pick only certain known keys from a JSON object, but
this will allow to walk complete objects and have the callback act on
those.
To be able to easily represent nodesets and other data stored in
virBitmaps in libvirt, this patch introduces a set of helpers that allow
to convert the bitmap to and from JSON value objects.
Adding or reordering test cases is usually a pain due to static test
case names that are then passed to virtTestRun(). To ease the numbering
of test cases, this patch adds two simple helpers that generate the test
names according to the order they are run. The test name can be
configured via the reset function.
This will allow us to freely add test cases in middle of test groups
without the need to re-number the rest of test cases.
Extract the logic to determine which nodeset has to be used for a domain
from the formatting step so that it can be reused separately when the
nodeset is used in a different way.
The function is called from all {Attach,Update,Detach}Device APIs to
create config strings that are later passed to the xend to perform the
desired action. The function is intended to handle all supported
devices. However, as of 5b05358aba we
are trying to get disk driver of the device without checking if the
device really is a disk. This leads to an segmentation fault:
#0 0x00007ffff7571815 in virDomainDiskGetDriver () from /usr/lib/libvirt.so.0
#1 0x00007fffeb9ad471 in ?? () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#2 0x00007fffeb9b1062 in xenDaemonAttachDeviceFlags () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#3 0x00007fffeb9a8a86 in ?? () from /usr/lib/libvirt/connection-driver/libvirt_driver_xen.so
#4 0x00007ffff7609266 in virDomainAttachDevice () from /usr/lib/libvirt.so.0
#5 0x0000555555593c9d in ?? ()
#6 0x00007ffff76743c9 in virNetServerProgramDispatch () from /usr/lib/libvirt.so.0
#7 0x00005555555a678d in ?? ()
#8 0x00007ffff755460e in ?? () from /usr/lib/libvirt.so.0
#9 0x00007ffff7553b06 in ?? () from /usr/lib/libvirt.so.0
#10 0x00007ffff4998b50 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#11 0x00007ffff46e30ed in clone () from /lib/x86_64-linux-gnu/libc.so.6
#12 0x0000000000000000 in ?? ()
Reported-by: Xiaolin Su <linxxnil@126.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1170492
In one of our previous commits (dc8b7ce7) we've done a functional
change even though it was intended as pure refactor. The problem is,
that the following XML:
<vcpu placement='static' current='2'>6</vcpu>
<cputune>
<emulatorpin cpuset='1-3'/>
</cputune>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
gets translated into this one:
<vcpu placement='auto' current='2'>6</vcpu>
<cputune>
<emulatorpin cpuset='1-3'/>
</cputune>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
We should not change the vcpu placement mode. Moreover, we're doing
something similar in case of emulatorpin and iothreadpin. If they were
set, but vcpu placement was auto, we've mistakenly removed them from
the domain XML even though we are able to set them independently on
vcpus.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables synchronization of the host macvtap
device options with the guest device's in response to the
NIC_RX_FILTER_CHANGED event.
The following device options will be synchronized:
* PROMISC
* MULTICAST
* ALLMULTI
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:
* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1158034
If we're expecting to create a file somewhere and that fails for some
reason during qemuOpenFileAs, then we unlink the path we're attempting
to create leaving no way to determine what the "existing" privileges,
protections, or labels are that caused the failure (open, change owner
and group, change mode, etc.).
Furthermore, if we fall into the path where we'll be opening / creating
the file using VIR_FILE_OPEN_FORK, we need to first unlink/delete the file
we created in the first path; otherwise, the attempt by the child process
to open as some specific user:group may fail because the file was already
created using nfsnobody:nfsnobody. Again, if we didn't create the file we
don't want to blindly delete what already exists. Thus, a second reason for
the original check to set need_unlink to false when we find the file with
CREAT set, but already existing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
A gnulib change (commit id 'beae0bdc') causes ENOTCONN to be returned
from recvfd which causes us to fall into the throwaway waitpid() call
and return ENOTCONN to the caller, this then gets displayed during
a 'virsh save' when using a root squashed NFS environment that's trying
to save the file as something other than root:root.
This patch will add the additional check for ENOTCONN to force the code
into the waitpid loop looking for the actual status from the _exit()'d
child fork.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '540c339a' to fix issues with reference counting and transient
domains moved the qemuDomainObjEndAsyncJob call prior to the attempt to
restart the guest CPU's resulting in an error:
error: Failed to save domain rhel70 to /tmp/pl/rhel70.save
error: internal error: unexpected async job 3
when (ret != 0) - eg, the error path from qemuDomainSaveMemory.
This patch will adjust the logic to call the EndAsyncJob only after
we've tried to restart the guest CPUs. It also needs to adjust the
test for qemuDomainRemoveInactive to add the ret == 0 condition.
Additionally, if we get to endjob: because of some error earlier, then
we need to save that error in the event the CPU restart logic fails.
We don't want to return the error from CPU restart failure, rather we
want to return the error from the failed save that caused us to fall
into the retry to start the CPU logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There are some interface types (notably 'server' and 'client')
which instead of allowing the default set of elements and
attributes (like the rest do), try to enumerate only the elements
they know of. This way it's, however, easy to miss something. For
instance, the <address/> element was not mentioned at all. This
resulted in a strange behavior: when such interface was added
into XML, the address was automatically generated by parsing
code. Later, the formatted XML hasn't passed the RNG schema. This
became more visible once we've turned on the XML validation on
domain XML changes: appending an empty line at the end of
formatted XML (to trick virsh think the XML had changed) made
libvirt to refuse the very same XML it formatted.
Instead of trying to find each element and attribute we are
missing in the schema, lets just allow all the elements and
attributes like we're doing that for the rest of types. It's no
harm if the schema is wider than our parser allows.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, even though users can pass the list of UEFI:NVRAM pairs at the
configure time, we may maintain the list of widely available UEFI
ourselves too. And as arm64 begin to rises, OVMF was ported there too.
With a slight name change - it's called AAVMF, with AAVMF_CODE.fd
being the UEFI firmware and AAVMF_VARS.fd being the NVRAM store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up until now there are just two ways how to specify UEFI paths to
libvirt. The first one is editing qemu.conf, the other is editing
qemu_conf.c and recompile which is not that fancy. So, new
configure option is introduced: --with-loader-nvram which takes a
list of pairs of UEFI firmware and NVRAM store. This way, the
compiled in defaults can be passed during compile time without
need to change the code itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When compiling without WITH_MACVTAP, we can get:
'unsupported flags (0x1) in function
virNetDevMacVLanCreateWithVPortProfile'
on an attempt to start a domain.
Remove the flag check to reach the more helpful error:
Cannot create macvlan devices on this platform
https://bugzilla.redhat.com/show_bug.cgi?id=1186928
--live and --config can't be specified together when querying the
configuration, but are valid when setting. The man page was hinting that
they are valid always.
https://bugzilla.redhat.com/show_bug.cgi?id=1138516
If the provided volume name doesn't match what parted generated as the
partition name, then return a failure.
Update virsh.pod and formatstorage.html.in to describe the 'name' restriction
for disk pools as well as the usage of the <target>'s <format type='value'>.
When removing a volume that is the extended partition, all the logical
volume partitions that exist within the extended partition will also be
removed, so we need to refresh the pool to have the updated list
