Commit Graph

36301 Commits

Author SHA1 Message Date
Erik Skultety
2b082d875d nwfilter: Use immediate packet delivery mode rather than buffering
Our nwfilter code doesn't set any timeout on the pcap packet buffer which
means that when DHCP snooping is enabled on a guest interface and
libvirt is trying to learn the IP address from guest's DHCP traffic, it
takes up to 4x longer to ping a guest successfully compared to a case
where nwfilter isn't enabled at all or libvirt uses the cached nwfilter
leases to populate the corresponding rules to ebtables.
With the pcap filter and rate limiting already in place, we should be
able to afford enabling the immediate packet delivery, FWIW immediate
mode was actually the default prior libpcap-1.5.0 (CentOS 6) regardless
of whether a buffer was requested.

The lack of any kind of timeout on the pcap buffer messed with the
libvirt TCK test suite which, even with a generous timeout in place,
timeouts every single time simply because it takes a while until
guest actually starts producing any kind of traffic to fill up
the buffer in place (apart from the DHCP traffic which happens fairly
early on).

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-30 16:30:18 +01:00
Erik Skultety
77c534033c libpcap: Bump the minimum required version to >= 1.5.0
libpcap-1.5.0 introduced a function to enforce immediate mode (on all
platforms) which the follow-up patches will rely on.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-30 16:30:12 +01:00
Ján Tomko
49882b3337 Add a space before ending a comment
Also add a space after the start in some of the cases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-01-30 12:32:03 +01:00
Michal Privoznik
2f74105d2c apparmor: Drop 'Last modified' comment from profiles
At the beginning of each profile we have a comment that says when
the profile was last updated. In theory, it makes sense because
one can see immediately if they are using an outdated profile.
However, we don't do a good job in keeping the comments in sync
with reality and also sysadmins should rather use their package
manager to find out libvirt version which installed the profiles.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2020-01-30 08:57:59 +01:00
Michal Privoznik
8f204fb4da apparmor: Allow some more BIOS/UEFI paths
There are two more paths that we are missing in the default
domain profile: /usr/share/edk2-ovmf/ and /usr/share/sgabios/.
These exist on my Gentoo box and contain UEFI and BIOS images
respectively.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2020-01-30 08:57:59 +01:00
Michal Privoznik
07af71ad99 apparmor: Sort paths in blocks in libvirt-qemu profile
Even though we construct a domain specific profile for each
domain we start (which should cover domain specific paths), there
is also another file that is included from the profile and which
contains domain agnostic paths (e.g. to cover libraries that qemu
links with). The paths in the file are split into blocks divided
by comments. Sort the paths in each block individually (ignoring
case sensitivity).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2020-01-30 08:57:59 +01:00
Dario Faggioli
849052ec61 libxl: support getting and setting parameters for the Credit2
With Credit2 being Xen default scheduler, it's definitely the case to
allow Credit2's scheduling parameters to be get and set via libvirt.

This is easy, as Credit and Credit2 have (at least as of now) the very
same parameters ('weight' and 'cap'). So we can just let credit2 pass
the scheduler-type check and the same code will work for both.

Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2020-01-29 17:27:08 -07:00
Laine Stump
f0f34056ab docs: document <interface> subelement <teaming>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Laine Stump
8a226ddb36 qemu: add wait-unplug to qemu migration status enum
Aside from itinerant error (actually warning) messages due to an
unrecognized response from qemu, this isn't even necessary - the
migration proceeds successfully to completion anyway.

(I'm not sure where to see this status reported in the API though - do
we need to add an extra state, or recognition of a new event somewhere?)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Laine Stump
2758f680b7 qemu: allow migration with assigned PCI hostdev if <teaming> is set
Normally a PCI hostdev can't be migrated, so
qemuMigrationSrcIsAllowedHostdev() won't permit it. In the case of a a
hostdev network interface that has <teaming type='transient'/> set,
QEMU will automatically unplug the device prior to migration, and
re-plug a corresponding device on the destination. This patch modifies
qemuMigrationSrcIsAllowedHostdev() to allow domains with those devices
to be migrated.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Laine Stump
eb9f6cc4b3 qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.

Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.

The result of this will be:

1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).

2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Laine Stump
fb0509d06a conf: parse/format <teaming> subelement of <interface>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:

  <interface type='bridge'>
    <source bridge='br0'/>
    <model type='virtio'/>
    <mac address='00:11:22:33:44:55'/>
    <alias name='ua-backup0'/>
    <teaming type='persistent'/>
  </interface>
  <interface type='hostdev'>
    <source>
      <address type='pci' bus='0x02' slot='0x10' function='0x4'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
    <teaming type='transient' persistent='ua-backup0'/>
  </interface>

The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Laine Stump
cad65f222f qemu: add capabilities flag for failover feature
Presence of the virtio-net-pci option called "failover" indicates
support in a qemu binary of a simplistic bonding of a virtio-net
device with another PCI device. This feature allows migration of
guests that have a network device assigned to a guest with VFIO, by
creating a network bond device in the guest consisting of the
VFIO-assigned device and a virtio-net-pci device, then temporarily
(and automatically) unplugging the VFIO net device prior to migration
(and hotplugging an equivalent device on the migration
destination). (The feature is called "failover" because the bond
device uses the vfio-pci netdev for normal guest networking, but
"fails over" to the virtio-net-pci netdev once the vfio-pci device is
unplugged for migration.)

Full functioning of the feature also requires support in the
virtio-net driver in the guest OS (since that is where the bond device
resides), but if the "failover" commandline option is present for the
virtio-net-pci device in qemu, at least the qemu part of the feature
is available, and libvirt can add the proper options to both the
virtio-net-pci and vfio-pci device commandlines to indicate qemu
should attempt doing the failover during migration.

This patch just adds the qemu capabilities flag "virtio-net.failover".

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 15:33:29 -05:00
Daniel P. Berrangé
3d63a187ba bootstrap: remove 18 more gnulib modules
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
  with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
  get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
e429934550 src: conditionalize EAI_ADDRFAMILY
The EAI_ADDRFAMILY constant has been removed from FreeBSD
headers, supposedly because it is deprecated by new RFC
drafts.

Previously GNULIB was providing a replacement because
MinGW lacked it too. The replacement provided for MinGW
was thus being used on FreeBSD too, but with a completely
bogus integer value.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
21fa70e2f6 tests: conditionalize use of SIGPIPE
SIGPIPE is not available on the Windows platform.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
fc920f704c src: convert all code to use virsocket.h
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
a464220430 src: conditionalize use of chown & stat constants
chown and some stat constants are not available on
the Windows platform.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
6dd8913207 src: conditionalize use of O_BINARY
The O_BINARY flag is not defined on all platforms so we must
conditionalize its use once we remove GNULIB.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
b0bea258d3 src: conditionalize use of O_DIRECT
The O_DIRECT flag is not available on all platforms, so we
must introduce a compat define the same way gnulib does.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
4b9919af40 src: conditionalize use of F_DUPFD_CLOEXEC
The F_DUPFD_CLOEXEC functionality is not available on
some platformms. We must thus explicitly call the
virSetCloexec function once we remove GNULIB's equiv
fix for this.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
2a656fc9d8 src: ensure O_CLOEXEC is defined on Windows
Windows uses _O_NOINHERIT as the name for its O_CLOEXEC
equivalent. Define O_CLOEXEC to match this to fix
portability when we remove GNULIB.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
18dca21a32 src: stop using O_DIRECTORY in resctrl
The O_DIRECTORY flag causes open() to return an error
if the filename is a directory. There's no obvious
reason why resctrl needs to use this, while the rest of
libvirt code does not. Removing it avoids build issues
on platforms where O_DIRECTORY is not defined, once we
remove GNULIB.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
5c455d9081 configure: request system specific extensions
The AC_USE_SYSTEM_EXTENSIONS macro causes things like
"USE_GNU" to be defined, which enables access to OS
specific extensions to POSIX. We currently got this
indirectly via GNULIB's 'extensions' module which is
a dependancy of other GNULIB modules we use.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
3ec271bada src: conditionalize use of S_ISSOCK macro
The S_ISSOCK macro is not available on Windows platforms.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
cf308f13db configure: add check for sys/ioctl.h
We currently get the sys/ioctl.h check indirectly
via GNULIB, but this will soon stop happening.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
7f3eb533f4 src: conditionalize use of net/if.h
The net/if.h is not portable so we must check for its
existance and avoid using it when missing. Some use
of net/if.h was redundant and could be removed.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
2b45f453a3 util: conditionalize virProcess APIs on Windows
Many of the virProcess APIs are relying on GNULIB providing
POSIX API stubs. Even with these stubs the APIs don't do
anything useful once compiled. We can thus conditionalize
the code so that we don't compile anything at all.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
32fe38646a src: remove all traces of Cygwin support
Cygwin is not a supported build platform for libvirt and
has no testing coverage in our CI systems. Stop pretending
the code is usable and remove it so there is less to port
to Meson.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
19ae64653d util: conditionalize more of virCommand on WIN32
A large part of the virCommand code is still built on
WIN32, despite the fact that the core fork() & execve()
functions are not available. So despite succesfully
building most of the code, at runtime the APIs are
none the less unusuable. With the elimination of GNULIB
many of the APIs being used in this code no longer have
portability wrappers/shims for Windows.

Rather than try to add portability wrappers, or do tests
for each individual function, it is clearer to conditionalize
nearly all of the code using #ifdef WIN32.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
c7df5ca0bb m4: disable polkit build on Windows
polkit is only useful on Linux systems

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
c58edd05f7 src: replace mkdir() with g_mkdir()
g_mkdir() provides portability to Windows platforms.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
3aab3362f6 src: only import sys/uio.h when journald is built
The sys/uio.h header is only needed when building logging
code with journald support enabled. Conditionally include
it so that we avoid break on platforms which lack this
header.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
ff627b4726 rpc: conditionalize signal handling
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
17460825f3 src: implement APIs for passing FDs over UNIX sockets
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
d575590c52 storage: remove use of stat-time.h headers
The gnulib stat-time.h header provides wrapper functions
to hide the differences in 'struct stat' between various
platforms.

Linux and FreeBSD support the same names, except for
birthtime which Linux only provides in the new 'statx()'
syscall we're not using. macOS has completely different
naming. Since we only rely on this code in one place
we just use conditionals at time of need.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
47744e0694 util: explicitly include windows.h
The virProcess code relies on windows.h and is getting it
indirectly via some GNULIB header fixes. This dependancy
needs to be made explicit.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
3f4435d877 src: remove unused sys/utsname.h includes
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
6485c2c0ae tools: replace wcwidth() with g_unichar_* APIs
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
540cf03926 util: use getgrouplist() directly instead of mgetgroups
The mgetgroups function is a GNULIB custom wrapper around
getgrouplist(). This implements a simplified version of
that code directly.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
f80c009cb3 build: generate configmake.h in root directory
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
27a6edf50f src: remove usage of strchrnul function
The strchrnul function doesn't exist on Windows and rather
than attempt to implement it, it is simpler to just avoid
its usage, as any callers are easily adapted.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
db72866310 util: add API for reading password from the console
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
19ff90a9c5 util: add a virArchFromHost() impl for Windows
Instead of relying on GNULIb's uname() impl, directly use the
Windows API for determining CPU architecture.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
e7def90b90 tests: stop setting $SHELL env variable
None of the tests appear to reference a SHELL env variable
explicitly and they all succeeed when it is not set. This
eliminates the only use of the gnulib posix-shell module.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
217b564a77 docs: add warning about virt-qemu-run being experimental
We currently note that the QEMU embedded driver is experimental
in the drvqemu.html file, but we should do the same in the
virt-qemu-run man page.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:30:57 +00:00
Daniel Henrique Barboza
dbf1f68410 security: do not remember/recall labels for VFIO
Files inside /dev/vfio/ can't be opened more than once, meaning
that any subsequent open calls will fail. This behavior was
introduced in kernel v3.11, commit 6d6768c61b39.

When using the VFIO driver, we open a FD to /dev/vfio/N and
pass it to QEMU. If any other call attempt for the same
/dev/vfio/N happens while QEMU is still using the file, we are
unable to open it and QEMU will report -EBUSY. This can happen
if we hotplug a PCI hostdev that belongs to the same IOMMU group
of an existing domain hostdev.

The problem and solution is similar to what we already dealt
with for TPM in commit 4e95cdcbb3. This patch changes both
DAC and SELinux drivers to disable 'remember' for VFIO hostdevs
in virSecurityDACSetHostdevLabelHelper() and
virSecurityDACSetHostdevLabel(), and 'recall'
in virSecurityDACRestoreHostdevLabel() and
virSecuritySELinuxRestoreHostdevSubsysLabel().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-29 13:50:51 +01:00
Daniel Henrique Barboza
09804edd0a security: Allow 'remember' to be set for HostdevLabelHelper
There is a case in which we do not want 'remember' to be
set to true in SetOwnership() calls inside the
HostdevLabelHelper() functions of both DAC and SELinux drivers.
Next patch will explain and handle that scenario.

For now, let's make virSecurityDACSetOwnership() and
virSecuritySELinuxSetHostdevLabelHelper() accept a 'remember'
flag, which will be used to set the 'remember' parameter
of their respective SetOwnership() calls. No functional
change is made.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-29 13:50:51 +01:00
Daniel P. Berrangé
5b971b0f76 docs: use --strict arg when processing rst docs
The --strict arg forces the rst tools to abort with an error instead
of printing warnings to stderr, or the output document.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 12:16:13 +00:00
Daniel P. Berrangé
4ed55c0be1 docs: fix various duplicate link targets in virsh.rst
You can't have two links with the same text when using named
link references (a single "_"). If you need multiple links
with the same text you must use anonymous link references
(a double "_").

There are also some duplicate section headers causing the
same problem with duplicate link targets.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 12:16:00 +00:00