The network metadata support is a new feature in the upcoming
release, not a removed one. Place it accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBitmapFormat returns the string that should be freed.
All strings in three ADD_BITMAP calls in qemuDomainGetGuestVcpusParams
are contained in tmp. So memory leak is possible here without VIR_FREE.
Fixes: 0108deb944
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The actual versioning policy[1] is a bit more nuanced, and in
particular there are scenarios in which the monthly release
is intentionally skipped, but overall it's not inaccurate to
claim that the release cadence of the Go bindings follows the
one of the C library.
[1] https://gitlab.com/libvirt/libvirt-go-module/-/blob/master/VERSIONING.rst
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that providing the value is optional, we can remove almost
all uses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most services, the socket paths can be derived trivially from
the name of the daemon: for virtqemud, for example, they will be
/run/libvirt/virtqemud-sock
/run/libvirt/virtqemud-sock-ro
/run/libvirt/virtqemud-admin-sock
libvirtd and virtproxyd are the exceptions, since their socket
paths will be
/run/libvirt/libvirt-sock
/run/libvirt/libvirt-sock-ro
/run/libvirt/libvirt-admin-sock
So we still need to be able to provide a custom @sockprefix@ in
those cases, but in the most common scenario we can do away with
the requirement by introducing a sensible default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most services, the value provided explicitly matches the
documented default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The decision is based only on whether Polkit support is enabled,
so there's no need to go through it again for every single
service.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The meaning of the _def suffix might not be immediately obvious,
especially since it's also used to refer to the output of the
meson-gen-def.py script elsewhere in the same file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The information is not used anywhere right now, but the
documentation for virt_daemon_units claims it's mandatory.
We also intend to actually start using it later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This tells systemd that the services in question support the
native socket activation protocol.
virtlogd and virtlockd, just like all the other daemons, implement
the necessary handshake.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While systemd will automatically match foo.socket with foo.service
based on their names, it's nicer to connect the two explicitly.
This is what we do for all services, with virtlogd and virtlockd
being the only exceptions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This annotation being missing resulted in virtlogd and virtlockd
being marked as "indirect" services, i.e. services that cannot
be started directly but have to be socket activated instead.
While this is our preferred configuration, we shouldn't prevent
the admin to start them at boot if they want to.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirtd, virtlog and virtlockd are enabled, we want their
admin sockets to be enabled for socket activation as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Commit 93af79fb removed a cleanup label in favor of returning error
values directly in certain cases. But the final return value was changed
from -1 to 0. If we get to the end of the function, that means that
we've waited for the process to exit but it still exists. So we should
return -1. The error message was still being set correctly, but we were
returning a success status (0).
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a modular daemon configuration, virtxend does not support the
virNetwork* APIs. It should open a connection to virtnetworkd when
using those APIs, but currently always opens a connection to
"xen:///system". Switch to using virGetConnectNetwork to obtain a
valid connection instead of using the hardcoded URI.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewing the code I found that return value of function
udev_device_get_sysattr_value() is dereferenced without a check.
udev_device_get_sysattr_value() may return NULL by number of reasons.
v2: VIR_DEBUG added, replaced STREQ(NULLSTR()) with STREQ_NULLABLE()
v3: More checks added, to skip earlier. More verbose VIR_DEBUG.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virDomainMemoryDefValidate() there's a check that
address where a virtio-mem memory device is mapped to is a
multiple of its block size. But this check is off by a couple of
bits, because the memory address is in bytes while the block size
is in kibibytes. Therefore, when checking whether address is a
multiple of the block size, the latter has to be multiplied by a
factor of 1024.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU mandates the VIRTIO_PMEM address is aligned to a pagesize.
This is a very reasonable requirement. So much so, that it
deserves to be in hypervisor agnostic validation code
(virDomainMemoryDefValidate()). Not that any other hypervisor
would support VIRTIO_PMEM yet. But even if they did, this would
surely be still valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our test driver lacks implementation for
virConnectGetDomainCapabilities(). Provide one, though a trivial
one. Mostly so that something else than VIR_ERR_NO_SUPPORT error
is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As can be seen from previous commits, it's fairly easy to pass a
different type to virReportEnumRangeError() than the actual
variable is of. So far, we have a sizeof() hack to check if some
nonsensical types are not passed, e.g. it catches cases where a
function name is passed instead of an enum. Extend the hack to
check whether proper enum was passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @backend member of _virDomainVideoDef struct is of type
virDomainVideoBackendType. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @virtPortOp variable inside of virNetDevVPortProfileOp8021Qbh
is of type virNetDevVPortProfileLinkOp. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to declare variables without using 'enum
virNetDev....' and will become more useful in the near future
(when virReportEnumRangeError() is fixed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Function virGetConnectSecret() can return NULL so we need to check it
since in virSecretGetSecretString() it gets dereferenced.
Reported-by: coverity
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Require libnbd-devel when building the qemu driver, recommend nbdkit
packages.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the ability to specify a path to a ssh-agent socket in order to use
the ssh-agent to authenticate to remote ssh disks. Example
configuration:
<disk type='network'>
</source protocol='ssh' ...>
<identity username='myusername' agentsock='/path/to/socket'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Authenticating via key file to an ssh server is often preferable to
logging in via password. In order to support this functionality add a
new <identity> xml element for ssh disks that allows the user to specify
a keyfile and username. Example configuration:
<disk type='network'>
<source protocol='ssh' ...>
<identity keyfile='/path/to/id_rsa' username='myusername'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to make ssh disks usable, we need to be able to validate a
remote host. To do this, add a <knownHosts> xml element for ssh disks to
allow the user to specify a location for a file that contains known host
keys. Implementation to follow.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
