Remove many imports of sys/ioctl.h which are redundant,
and conditionalize remaining usage that needs to compile
on Windows platforms.
The previous change to remove the "nonblocking" gnulib
module indirectly caused the loss of the "ioctl" gnulib
module that we did not explicitly list in bootstrap.conf
despite relying on.
Rather than re-introduce the "ioctl" module this patch
makes it redundant.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Back in July 2010, commit 6ea90b84 (meant to resolve
https://bugzilla.redhat.com/571991 ) added code to set the MAC address
of any tap device to the associated guest interface's MAC, but with
the first byte replaced with 0xFE. This was done in order to assure
that
1) the tap MAC and guest interface MAC were different (otherwise L2
forwarding through the tap would not work, and the kernel would
repeatedly issue a warning stating as much).
2) any bridge device that had one of these taps attached would *not*
take on the MAC of the tap (leading to network instability as
guests started and stopped)
A couple years later, https://bugzilla.redhat.com/798467 was filed,
complaining that a user could configure a tap-based guest interface to
have a MAC address that itself had a first byte of 0xFE, silently
(other than the kernel warning messages) resulting in a non-working
configuration. This was fixed by commit 5d571045, which logged an
error and failed the guest start / interface attach if the MAC's first
byte was 0xFE.
Although this restriction only reduces the potential pool of MAC
addresses from 2^46 (last two bits of byte 1 must be set to 10) by
2^32 (still 4 orders of magnitude larger than the entire IPv4 address
space), it also means that management software that autogenerates MAC
addresses must have special code to avoid an 0xFE prefix. Now after 7
years, someone has noticed this restriction and requested that we
remove it.
So instead of failing when 0xFE is found as the first byte, this patch
removes the restriction by just replacing the first byte in the tap
device MAC with 0xFA if the first byte in the guest interface is
0xFE. 0xFA is the next-highest value that still has 10 as the lowest
two bits, and still
2) meets the requirement of "tap MAC must be different from guest
interface MAC", and
3) is high enough that there should never be an issue of the attached
bridge device taking on the MAC of the tap.
The result is that *any* MAC can be chosen by management software
(although it would still not work correctly if a multicast MAC (lowest
bit of first byte set to 1) was chosen), but that's a different
issue).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1595184
Some domain <interfaces/> do not have a name (because they are
not TAP devices). Therefore, if
virNetDevTapInterfaceStats(net->ifname, ...) is called an instant
crash occurs. In Linux version of the function strlen() is called
over the name and in BSD version STREQ() is called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
virNetDevTapGetRealDeviceName() is used on FreeBSD because interface
names (such as one sees in output of tools like ifconfig(8)) might not
match their /dev entity names, and for bhyve we need the latter.
Current implementation is not very efficient because in order to find
/dev name, it goes through all /dev/tap* entries and tries to issue
TAPGIFNAME ioctl on it. Not only this is slow, but also there's a bug in
this implementation when more than one NIC is passed to a VM: once we
find the tap interface we're looking for, we set its state to UP because
opening it for issuing ioctl sets it DOWN, even if it was UP before.
When we have more than 1 NIC for a VM, we have only last one UP because
others remain DOWN after unsuccessful attempts to match interface name.
New implementation just uses sysctl(3), so it should be faster and
won't make interfaces go down to get name.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Change the settings from qemuDomainUpdateDeviceLive() as otherwise the
call would succeed even though nothing has changed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch makes use of the virNetDevSetCoalesce() function to make
appropriate settings effective for devices that support them.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reported by Rafał Wojciechowski <it@rafalwojciechowski.pl>.
Thread 1 (Thread 0x7f194b99d700 (LWP 5631)):
0 virNetDevGetifaddrsAddress (addr=0x7f194b99c7c0, ifname=0x7f193400e2b0 "ovirtmgmt") at util/virnetdevip.c:738
1 virNetDevIPAddrGet (ifname=0x7f193400e2b0 "ovirtmgmt", addr=addr@entry=0x7f194b99c7c0) at util/virnetdevip.c:795
2 0x00007f19467800d6 in networkGetNetworkAddress (netname=<optimized out>, netaddr=netaddr@entry=0x7f1924013f18) at network/bridge_driver.c:4780
3 0x00007f193e43a33c in qemuProcessGraphicsSetupNetworkAddress (listenAddr=0x7f19340f7650 "127.0.0.1", glisten=0x7f1924013f10) at qemu/qemu_process.c:4062
4 qemuProcessGraphicsSetupListen (vm=<optimized out>, graphics=0x7f1924014f10, cfg=0x7f1934119f00) at qemu/qemu_process.c:4133
5 qemuProcessSetupGraphics (flags=17, vm=0x7f19240155d0, driver=0x7f193411f1d0) at qemu/qemu_process.c:4196
6 qemuProcessPrepareDomain (conn=conn@entry=0x7f192c00ab50, driver=driver@entry=0x7f193411f1d0, vm=vm@entry=0x7f19240155d0, flags=flags@entry=17) at qemu/qemu_process.c:4969
7 0x00007f193e4417c0 in qemuProcessStart (conn=conn@entry=0x7f192c00ab50, driver=driver@entry=0x7f193411f1d0, vm=0x7f19240155d0,asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_START, migrateFrom=migrateFrom@entry=0x0, migrateFd=migrateFd@entry=-1, migratePath=migratePath@entry=0x0,snapshot=snapshot@entry=0x0, vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=17, flags@entry=1) at qemu/qemu_process.c:5553
Man page for getifaddrs also states that the "ifa_addr" may contain
a null pointer which happens if there is an existing network interface
on the host without IP address.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch splits out the part of virNetDevTapCreateInBridgePort()
that would need to be re-done if an existing tap device had to be
re-attached to a bridge, and puts it into a separate function. This
can be used both when an existing domain interface config is updated
to change its connection, and also to re-attach to the "same" bridge
when a network has been stopped and restarted. So far it is used for
nothing.
virNetDevTapCreateInBridgePort() has always set the new tap device to
the current MTU of the bridge it's being attached to. There is one
case where we will want to set the new tap device to a different
(usually larger) MTU - if that's done with the very first device added
to the bridge, the bridge's MTU will be set to the device's MTU. This
patch allows for that possibility by adding "int mtu" to the arg list
for virNetDevTapCreateInBridgePort(), but all callers are sending -1,
so it doesn't yet have any effect.
Since the requested MTU isn't necessarily what is used in the end (for
example, if there is no MTU requested, the tap device will be set to
the current MTU of the bridge), and the hypervisor may want to know
the actual MTU used, we also return the actual MTU to the caller (if
actualMTU is non-NULL).
Commit e81de04c switched virNetDevTapGetRealDeviceName() to use
virDirOpen() instead of opendir(), however it mistakenly dropped
DIR *dirp declaration, so restore that to fix build.
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
In making the conversion to the new API, I fixed a couple bugs:
virSCSIDeviceGetSgName would leak memory if a directory
unexpectedly contained multiple entries;
virNetDevTapGetRealDeviceName could report a spurious error
from a stale errno inherited before starting the readdir search.
The decision on whether to store the result of virDirRead into
a variable is based on whether the end of the loop falls through
to cleanup code automatically. In some cases, we have loops that
are documented to return NULL on failure, and which raise an
error on most failure paths but not in the case where the directory
was unexpectedly empty; it may be worth a followup patch to
explicitly report an error if readdir was successful but the
directory was empty, so that a NULL return always has an error set.
* src/util/vircgroup.c (virCgroupRemoveRecursively): Use new
interface.
(virCgroupKillRecursiveInternal, virCgroupSetOwner): Report
readdir failures.
* src/util/virfile.c (virFileLoopDeviceOpenSearch)
(virFileNBDDeviceFindUnused, virFileDeleteTree): Use new
interface.
* src/util/virnetdevtap.c (virNetDevTapGetRealDeviceName):
Properly check readdir errors.
* src/util/virpci.c (virPCIDeviceIterDevices)
(virPCIDeviceFileIterate, virPCIGetNetName): Report readdir
failures.
(virPCIDeviceAddressIOMMUGroupIterate): Use new interface.
* src/util/virscsi.c (virSCSIDeviceGetSgName): Report readdir
failures, and avoid memory leak.
(virSCSIDeviceGetDevName): Report readdir failures.
* src/util/virusb.c (virUSBDeviceSearch): Report readdir
failures.
* src/util/virutil.c (virGetFCHostNameByWWN)
(virFindFCHostCapableVport): Report readdir failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, kernel supports up to 8 queues for a multiqueue tap device.
However, if user tries to enter a huge number (e.g. one million) the tap
allocation fails, as expected. But what is not expected is the log full
of warnings:
warning : virFileClose:83 : Tried to close invalid fd 0
The problem is, upon error we iterate over an array of FDs (handlers to
queues) and VIR_FORCE_CLOSE() over each item. However, the array is
pre-filled with zeros. Hence, we repeatedly close stdin. Ouch.
But there's more. The queues allocation is done in virNetDevTapCreate()
which cleans up the FDs in case of error. Then, its caller, the
virNetDevTapCreateInBridgePort() iterates over the FD array and tries to
close them too. And so does qemuNetworkIfaceConnect() and
qemuBuildInterfaceCommandLine().
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The IF_MAXUNIT macro is not present on all BSDs, so
make its use conditional, to avoid breaking OS-X.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In my previous patches I enabled the IFF_MULTI_QUEUE flag every
time the user requested multiqueue TAP device. However, this
works only at runtime. During build time the flag may be
undeclared.
In order to learn libvirt multiqueue several things must be done:
1) The '/dev/net/tun' device needs to be opened multiple times with
IFF_MULTI_QUEUE flag passed to ioctl(fd, TUNSETIFF, &ifr);
2) Similarly, '/dev/vhost-net' must be opened as many times as in 1)
in order to keep 1:1 ratio recommended by qemu and kernel folks.
3) The command line construction code needs to switch from 'fd=X' to
'fds=X:Y:...:Z' and from 'vhostfd=X' to 'vhostfds=X:Y:...:Z'.
4) The monitor handling code needs to learn to pass multiple FDs.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
These fixes solve a compilation failure on FreeBSD:
util/virnetdevtap.c: In function 'virNetDevTapGetName':
util/virnetdevtap.c:56: warning: unused parameter 'tapfd' [-Wunused-parameter]
util/virnetdevtap.c:56: warning: unused parameter 'ifname' [-Wunused-parameter]
* src/util/virnetdevtap.c (virNetDevTapGetName): Add attributes
when TUNGETIFF is not present.
Signed-off-by: Eric Blake <eblake@redhat.com>
This will be used on a tap file descriptor returned by the bridge helper
to populate the <target> element, because the helper does not provide
the interface name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
