'cfg' is never initialized here, which causes a crash
later in qemuCheckpointCreateFinalize
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For any backing file we set 'read-only' to true, but didn't do this when
modifying the recorded backing store when creating external snapshots.
This meant that qemu would attempt to open the backing-file read-write.
This would fail for example when selinux is used as qemu doesn't have
write permission for the backing file.
https://bugzilla.redhat.com/show_bug.cgi?id=1781079
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nearly all internal APIs use the QEMU capabilities or other
QEMU driver data directly, there's no compelling benefit to create
virCapsPtr at driver startup.
Skipping this means we don't probe capabilities for all 30 system
emulator targets at startup, only those emulators which are referenced
by an XML doc. This massively improves libvirtd startup time when the
capabilities cache is not populated. It even improves startup time
when the cache is up to date, as we don't bother to load files from
the cache until we need them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We always refresh the capabilities object when using virResctrlInfo
during process startup. This is undesirable overhead, because we can
just directly create a virResctrlInfo instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This option can be used to override the destination host name used for
TLS verification.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the TLS certificate from the destination host must match the
host's name for TLS verification to succeed. When the certificate does
not match the destination hostname and the expected cetificate's
hostname is known, this parameter can be used to pass this expected
hostname when starting the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The functions for converting migration typed parameters to QEMU
migration parameters and back were only implemented for integer types.
This patch adds support for string parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With blockdev we need to refer to the nodename of the disk source image
as the source argument for the blockdev-mirror operation while still
keeping the old job name. With blockdev we must also persist the job in
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate out allocation of the virStorageSource corresponding to the
target NBD export of the migration.
As part of the splitout we allocate the export name explicitly as that
one must not change regardless whether blockdev is used or not to
provide compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The non-shared-storage migration tracks the storage source used
explicitly in the migration data so we must allow for processing of the
block job which has NULL mirror as the mirror will not be populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that the cleanup section does not exist remove the label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuMigrationSrcNBDCopyCancelOne uses the block job data structure but
generated it's own job name rather than taking it from the block job
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With -blockdev we must use the nodename as the export but we must keep
the name of the export as it was before to ensure compatiblity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Declare the variable inside the loop with automatic clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainBlockJobSetSpeed was not converted to get the job name from
the block job data. This means that after enabling blockdev the API call
would fail as we wouldn't use the appropriate name.
https://bugzilla.redhat.com/show_bug.cgi?id=1780497
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Where appropriate replace the open coded call with the qemu wrapper
which already reports the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
On Debian 10, pdwtags reliably segfaults when parsing the libvirt remote
protocol files. This crash was previously ignored by 'make check'
because of the way we piped the pdwtags output to the perl
post-processing scripts. When this was converted to use python it
mistakenly started being a fatal error. We need to explicitly ignore
pdwtags output if it exited with non-zero return code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
