After a QEMU domain is started, among other thing we query memory
device information. And while memory address is returned by QEMU
for all models, we store it only for DIMMs and NVDIMMs. Do store
it for VIRTIO_MEM and VIRTIO_PMEM too.
This effectively reports the address the virtio-mem/virtio-pmem
is mapped to in live XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Due to missed break; statement the virDomainInputDefPostParse()
is called not only for VIR_DOMAIN_DEVICE_INPUT but also
VIR_DOMAIN_DEVICE_LEASE and VIR_DOMAIN_DEVICE_NET, which can lead
to all sort of unpredictable results.
Fixes: c4bc4d3b82fbe22e03c986ca896090f481df5c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This brings the tool's list of features in sync with qemu
commit 886c0453cbf10eebd42a9ccf89c3e46eb389c357.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in QEMU by commit v8.0.0-7eb061b06e.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of updating defined mdevs only add another update for active
devices as well to cover transient mdev devices as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143158
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Again, this fixes the same problem as one of previous commits,
but this time for memory hotplug. Long story short, if there's a
domain running and the emulator thread is restricted to a subset
of host NUMA nodes, but the memory that's about to be hotplugged
requires memory from a host NUMA node that's not in the set we
need to allow emulator thread to access the node, temporarily.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Consider a domain with two guest NUMA nodes and the following
<numatune/> setting :
<numatune>
<memory mode="strict" nodeset="0"/>
<memnode cellid="0" mode="strict" nodeset="1"/>
</numatune>
What this means is the emulator thread is pinned onto host NUMA
node #0 (by setting corresponding cpuset.mems to "0"), and two
memory-backend-* objects are created:
-object '{"qom-type":"memory-backend-ram","id":"ram-node0", .., "host-nodes":[1],"policy":"bind"}' \
-numa node,nodeid=0,cpus=0-1,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1", .., "host-nodes":[0],"policy":"bind"}' \
-numa node,nodeid=1,cpus=2-3,memdev=ram-node1 \
Note, the emulator thread is pinned well before QEMU is even
exec()-ed.
Now, the way memory allocation works in QEMU is: the emulator
thread calls mmap() followed by mbind() (which is sane, that's
how everybody should do it). BUT, because the thread is already
restricted by CGroups to just NUMA node #0, calling:
mbind(host-nodes:[1]); /* made up syntax (TM) */
fails. This is expected though. Kernel was instructed to place
the memory at NUMA node "0" and yet, process is trying to place
it elsewhere.
We used to solve this by not restricting emulator thread at all
initially, and only after it's done initializing (i.e. we got the
QMP greeting) we placed it onto desired nodes. But this had its
own problems (e.g. QEMU might have locked pieces of its memory
which were then unable to migrate onto different NUMA nodes).
Therefore, in v5.1.0-rc1~282 we've changed this and set cgroups
upfront (even before exec()-ing QEMU). And this used to work, but
something has changed (I can't really put my finger on it).
Therefore, for the initialization start the thread with union of
all configured host NUMA nodes ("0-1" in our example) and fix the
placement only after QEMU is started.
NB, the memory hotplug suffers the same problem, but that will
be fixed in the next commit.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2138150
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of qemuProcessSetupPid() there's @numatune variable which
is set to vm->def->numa, but it lives only in one block. In the
rest of places the expanded form (vm->def->numa) is used instead.
Move the variable declaration at the beginning of the function
and use it instead of the expanded form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We cannot use host-nodes attribute for it, but there is no reason for us
to skip the preallocation optimisation using thread-context in such
case. Thankfully returning the proper nodemask from
qemuBuildMemoryBackendProps is enough to trigger this.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff71377580cd37b118cee8a1f982d1d8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 1347a19f75a23b4d92e6a7b549fcde52b23f0258
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: c6c9b5d251de215ed378aa0bc31daa2e1170409e
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: b10bc8f7ab6f9986ccc54ba04fc5b3bad7576be6
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When parsing a <memnode/> we also check whether the @mode
argument fulfills some requirements wrt 'restrictive' mode. This
is not the right place though. There's virDomainNumaDefValidate()
which contains other checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainNumatuneNodeSpecified() function does not write into
passed @numatune pointer, it just reads from it. Therefore, the
argument should be const, which allows this function to be called
from places where virDomainNuma is already const (e.g. domain
validation code).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add new compress methods zlib and zstd for parallel migration,
these method should be used with migration option --comp-methods
and will be processed in 'qemuMigrationParamsSetCompression'.
Note that only one compress method could be chosen for parallel
migration and they cann't be used in compress migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature is not supported by all QEMUs, only those with
QEMU_CAPS_MACHINE_VIRT_MTE capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainAdjustMaxMemLock() with @forceVFIO set. All callers
pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
During hotplug of a NVMe disk we need to adjust the memlock
limit. The computation of the limit is handled by
qemuDomainGetMemLockLimitBytes() which looks at given domain
definition and accounts for various device types (as different
types require different amounts). But during disk hotplug the
disk is not added to domain definition until the very last
moment. Therefore, qemuDomainGetMemLockLimitBytes() has this
@forceVFIO argument which tells it to assume VFIO even if there
are no signs of VFIO in domain definition. And this kind of
works, until the amount needed for NVMe disks changed (in
v9.3.0-rc1~52). What's missing in the commit is making @forceVFIO
behave the same as if there was an NVMe disk present in the
domain definition.
But, we can do even better - just mimic whatever we're doing for
hostdevs. IOW - introduce qemuDomainAdjustMaxMemLockNVMe() that
behaves the same as qemuDomainAdjustMaxMemLockHostdev().
There are subtle differences though:
1) qemuDomainAdjustMaxMemLockHostdev() can afford placing hostdev
right at the end of vm->def->hostdevs, because the array was
already reallocated (at the beginning of
qemuDomainAttachHostPCIDevice()). But
qemuDomainAdjustMaxMemLockNVMe() doesn't have that luxury.
2) qemuDomainAdjustMaxMemLockHostdev() places a
virDomainHostdevDef pointer into domain definition, while
qemuDomainStorageSourceAccessModifyNVMe() (which calls
qemuDomainAdjustMaxMemLock()) sees a virStorageSource pointer
but domain definition contains virDomainDiskDef. But that's
okay, we can create a dummy disk definition and append it into
the domain definition.
After this, qemuDomainAdjustMaxMemLock() can be called with
@forceVFIO = false, as the disk is now part of domain definition
(when computing the new limit).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030#c28
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we're performing the lookup at runtime, doing it at
build time is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't bother looking at /usr/libexec, since every distro
ships dbus-daemon in $PATH.
Note that it's still possible for the administrator to prevent
this lookup and use an arbitrary binary by setting the
appropriate key in qemu.conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
