Few minor changes in qemu since the last update:
- 'cocoa' display and corresponding props (not present in this build)
Changes in build:
- dbus display driver re-enabled
- gtk display support re-disabled
- xen support re-disabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the 'disk-cdrom-network' to cover this instance. This also
validates that the parameters of -blockdev conform to the QAPI schema.
Also add the xml2xml variant of this test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was supposed to test the behavior when
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT is present, but these
days that's always the case and pseries-cpu-compat already
provides all the coverage we need.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also, validate that the requested feature is supported by QEMU.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Added "rss" and "rss_hash_report" configuration that should be
used with qemu virtio RSS. Both options are triswitches. Used as
"driver" options and affects only NIC with model type "virtio".
In other patches - options should turn on virtio-net RSS and hash
properties.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property is parsed using virTristateBoolTypeFromString() but
formatted as if it was a regular bool, which results in the
following incorrect conversion:
BOOL_ABSENT -> managed='no'
BOOL_YES -> managed='yes'
BOOL_NO -> managed='yes'
Use the virTristateBoolTypeToString() helper to ensure the
setting can survive a roundtrip conversion.
Fixes: 4b4a981d60
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Found when building on Fedora 36 on s390x.
C compiler for the host machine: gcc (gcc 12.0.1 "gcc (GCC) 12.0.1 20220308 (Red Hat 12.0.1-0)")
C linker for the host machine: gcc ld.bfd 2.37-24
In function ‘cpuTestUpdateLiveCompare’,
inlined from ‘cpuTestUpdateLive’ at ../dist-unpack/libvirt-8.2.5/tests/cputest.c:784:12:
../dist-unpack/libvirt-8.2.5/tests/cputest.c:696:21: warning: potential null pointer dereference [-Wnull-dereference]
696 | featAct->policy == VIR_CPU_FEATURE_REQUIRE) ||
| ~~~~~~~^~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu needs to be an integrated device, and our address
assignment code will make sure that is the case. If the user has
provided an explicit address, however, we should make sure any
addresses pointing to a different bus are rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu is a PCI device and attempts to use a different
address type should be rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device is configured to be an integrated endpoint, as is
necessary for it to function correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu doesn't work without ACPI, so we need to make sure
the latter is enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the boot-bypass
property of the virtio-iommu-pci device.
This property was only introduced in QEMU 7.0 but, since the
device has been around for much longer, we end up querying its
properties for several more releases. As I don't have convenient
access to the 10+ binaries necessary to regenerate the replies,
I just put some fake data in there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the virtio-iommu-pci
device.
Note that, while this device is present even in somewhat old
versions of QEMU, it's only some recent changes that made it
actually usable for our purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
This causes the argument to -device to be generated in JSON
format, same as what 1a691fe1c8 has done for x86_64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While commit a5e659f0 removed the restriction against multiple queues
for the vdpa net device, there were some missing pieces. Configuring a
device statically and then starting the domain worked as expected, but
hotplugging a device didn't have the expected multiqueue support
enabled. Add the missing bits.
Consider the following device xml:
<interface type="vdpa">
<mac address="00:11:22:33:44:03" />
<source dev="/dev/vhost-vdpa-0" />
<model type="virtio" />
<driver queues='2' />
</interface>
Without this patch, hotplugging the above XML description resulted in
the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
With the patch, hotplugging results in the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","queues":2,"id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","mq":true,"vectors":6,"netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024406
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apply the user-requested changes to the device definition as requested
by the <qemu:deviceOverride> element from the custom qemu XML namespace.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/287
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 06c960e477.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
QEMU 7.0.0 adds a new property tsc-clear-on-reset to x86 CPU, corresponding
to Libvirt's <tsc on_reboot="clear"/> element. Plumb it in the validation,
command line handling and tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that all tests are run after the helpers and mocks are
(re)built. This enables for example using "meson test" as the
command line passed to "git bisect run".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's generate prealloc-threads property onto the cmd line if
domain configuration requests so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The prealloc-threads is property of memory-backend class which is
parent to the other three classes memory-backend-{ram,file,memfd}.
Therefore the property is present for all, or none if QEMU is
older than v5.0.0-rc0~75^2~1^2~3 which introduced the property.
Anyway, the .reserve property is the same story, and we chose
memory-backend-file to detect it, so stick with our earlier
decision and use the same backend to detect this new property.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since its v5.0.0 release QEMU is capable of specifying number of
threads used to allocate memory. It defaults to 1, which may be
too low for humongous guests with gigantic pages.
In general, on QEMU cmd line level it is possible to use
different number of threads per each memory-backend-* object, in
practical terms it's not useful. Therefore, use <memoryBacking/>
to set guest wide value and let all memory devices 'inherit' it,
silently. IOW, don't introduce per device knob because that would
only complicate things for a little or no benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detect that qemu can override TLS hostname setting for NBD clients.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
