This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The fallback for distros which lack pkg-config support for devmapper
references an undefined variable "tmp". It appears non of our supported
build platforms are triggering this bug and so the fallback code can be
removed entirely rather than fixed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Hostdev setup code no longer resolves hostdev name in the commandline
formatter but we mock it directly in the monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not necessarily clear, why we need to create the hash table
as big as number of fields we want to store, but nevertheless,
the code can be written a bit better. The @count should be type
of size_t and could be used directly in the loop that counts the
fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The hypervSetEmbeddedProperty() function is used to update a
value for given property in a list of properties created by
hypervCreateEmbeddedParam(). The list is nothing fancy - it's a
virHashTable that has NULL as dataFree callback => the table does
not own the value. This is not that obvious since
hypervSetEmbeddedProperty() accepts a non-const pointer. This
fact makes it unnecessary hard to consume, e.g. if we wanted to
pass a stack allocated string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
We now have a schema file for the 'cpu' elements. Use it to validate
files in 'tests/cputestdata'
Unfortunately the files in the directory are too disorganised and not
easy to split up to do something more straightforward.
The -baseline- input files are tested by the test internally and the
rest of the files are internal data feeding the tests so they don't
need validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We weren't validating certain directories containing nwfilter, network
and capability XML test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate additional XML documents we use for internal testing.
Specifically there's a lot of them belonging to the vmx and bhyve test
suite which were not validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
<name> is mandatory for a domain XML. Add 'displayName' for all the test
cases which were missing them so that <name> is parsed correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmware's network names can contain space and they are used as bridge
source. Modify the schema to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vmware' private namespace wasn't present in our schema definition
making all XMLs having the <datacenterpath> element invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's quite a few negative tests. In anticipation of schema testing of
the 'nwfilterxml2xmlin' directory rename all negative/non-conformant
XMLs with the -invalid suffix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the 'flags' of the last rule to conform to the RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The reference string parser tolerates some leading/trailing whitespace
for the reference strings as witnessed by
tests/nwfilterxml2xmlin/iter-test3.xml
Allow them in the schema so that the test passes schema validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parser for the 'ipsetflags' accepts the 'src' and 'dst' values
stripping case. Express the same in the schema to pass validation of any
accepted string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The element is not needed for the test and doesn't conform to the domain
XML schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add all appropriate file from our test driver example XML directory.
Note that the two 'node.*' files are actually custom for the test driver
to load full state. We don't have a schema for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Match the correct subsets of the files via the 'dirRegex' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our schema forces a <target/> element which was not present in the
files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Schema mandates a '<dir>' element, not '<directory>'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we have directories with mixed XML files in the test
suite. Adding regex filtering will allow testing subsets of the XML
files against schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To allow greater variablitity of XML schema validation tests without
needlessly reparsing the schema we need to refactor the internals to
pass in structs rather than just paths to directory.
This allows to directly implement testing of single files and will
simplify further additions such as filtering of the list of XML files in
a directory.
The list of tested paths is directly ported for now and will be improved
in follow-up patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This caused
DEBUG: meson.build:2149:2: ERROR: Problem encountered: You must have numactl enabled for numad support.
on s390x.
Fixes: 974dc0a4c6
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to commit v5.1.0-2207-g96292515c0
Recent changes include deprecation of 'nbd-server-add' and addition of
'block-export-add'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu is going to deprecate this command in the next release. Allow this
as later patches will implement the use of replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The script was obscuring what's happening and not reporting errors
properly. Remove it since it's no longer used now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Replace the reimplementation of the XSLT processing custom target with
an identical copy form docs/meson.build and a comment to keep them in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Replace the reimplementation of the XSLT processing custom target with
an identical copy form docs/meson.build and a comment to keep them in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Replace the reimplementation of the XSLT processing custom target with
an identical copy form docs/meson.build and a comment to keep them in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Meson unfortunately doesn't give us any means to share the code using
xsltproc to output HTMLs processed by our template. This means we will
have to resort to copy&paste engineering.
To make things simpler, let's use the same block of code in
docs/meson.build but also any of the subdirs which generate htmls.
This will be achieved by making it configurable and wrapping it in a
comment that instructs anybody editing it to keep it identical.
We need to be able to configure the template file used and installation
directory. The rest of the processing is same as we do in
docs/meson.build.
This code will then be copied to subdirs to refactor the current
approach used there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since we no longer reformat the XSLT-transformed files, there's no need
to use an external script any more.
Unfortunately this hid errors from 'xsltproc' as return value was not
checked and the stderr was piped into xmllints stdin. The result was
that any invalid input file would result into an empty output file.
Since the script's only purpose was to prevent additional temporary
files at the time we were reformatting the output in a pipeline we no
longer need this.
Moving the generation directly into the meson definition makes it more
obvious what's happening and saves readers from having to parse what's
going on. A free bonus is that errors are now properly caught and
reported.
This patch converts the main docs/ directory for now with cleanup of
other comming later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Only 'acl.html' output file includes that file so there's no need to
make everything depend on it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The output HTML files (especially those generated from rST files) don't
look good even after reformatting. Skip the extra step and accept that
no matter what we do HTMLs will not look great.
This additionally makes it way simpler to remove meson-html-gen.py in
the future (thus I've neglected to remove passing of xmllint).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of the paragraphs added in f51cbe92c0 was not terminated thus
making it invalid XML/XHTML.
This was not caught by the build system as 'scripts/meson-html-gen.py'
unnecessarily obscures and hides errors from 'xsltproc'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Accept the 'datastore' variant of disk source specification used by our
VMware driver.
https://libvirt.org/drvesx.html#datastore
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
The test case is invoked using DO_TEST_FAIL so the XML files are
actually unexpected, unused and actually don't even conform to the RNG
schema for <domain>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Now, that ownership transfer of hypervSetEmbeddedProperty() is
clear, we can use automatic freeing of the hash table.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
