Since the previous version of this negative test now passes,
create a new version that still triggers the intended failure.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that, after the recent changes, the test passes, its old
name is no longer accurate.
While at it, enable the xml2xml part for it as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These are imported from Fedora 38's edk2 package.
The files that are being replaced date back to RHEL 7 and no
longer represent what libvirt is likely to encounter on an
actual production system.
Notably, the paths have all changed, with both x86_64 and
aarch64 builds now living under /usr/share/edk2 and the AAVMF
name being having been phased out.
Additionally, the 4MB qcow2 format builds have been introduced
on x86_64 and given high priority, effectively making qcow2
the default format across architectures.
The impact of these changes on the test suite is, predictably,
quite severe.
For the cases where paths to firmware files were explicitly
provided as part of the input, they have been adjusted so that
the modern paths are used instead of the legacy ones. Other
than that, input files have been left untouched.
The following expected changes can be seen in output files:
* where qcow2 firmware was used on x86_64, Secure Boot
support is now enabled;
* all ABI_UPDATE test cases for x86_64 now use qcow2
formatted firmware;
* test cases where legacy paths were manually provided
no longer get additional information about the firmware
added to the output XML.
Some of the changes described above highlight why, in order
to guarantee a stable guest ABI over time and regardless of
changes to the host's configuration, it was necessary to move
firmware selection from VM startup time to VM creation time.
In a few cases, updating the firmware descriptors changes the
behavior in a way that's undesired and uncovers latent bugs
in libvirt:
* firmware-manual-efi-secboot-legacy-paths ends up with
Secure Boot disabled, despite the input XML specifically
requesting it to be enabled;
* firmware-manual-efi-rw-modern-paths loses the
loader.readonly=no part of the configuration and starts
using an NVRAM file;
* firmware-manual-efi-nvram-template-nonstandard starts
failing altogether with a fairly obscure error message.
We're going to address all these issues with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of these are just additional coverage, but a few demonstrate
bugs in libvirt:
* firmware-manual-efi-nvram-template-nonstandard sees the NVRAM
template path, which was explicitly provided in the XML,
being overridden by the firmware selection machinery;
* firmware-auto-efi-rw* and firmware-manual-efi-rw-legacy-paths
lose the loader.readonly=no setting and thus behave
differently than requested;
* firmware-manual-efi-loader-path-nonstandard fails because an
NVRAM path doesn't get generated.
We're going to address all these issues with upcoming changes.
Note that the firmware-auto-efi-nvram-template-nonstandard
failure is expected: firmware autoselection has been enabled, but
the NVRAM template points to a custom path that's not mentioned
in any of the firmware descriptors and so it can't succeed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new name better describes the test scenario and will fit
better with the additional tests that we're about to introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have a number of tests that can benefit from this macro
instead of open-coding it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a config where both DIMM and non-DIMM <memory> devices are used so
that it validates that only DIMMs require memory slots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the unnecessary disk definition and use x86_64 emulator.
For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and add a '_CAPS_LATEST' invocation.
For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.
There are no sound-device relevant changes in the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a subset of what the 'sound-device' case tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the lookup of the corresponding QMP schema used for validation of
QMP commands from 'testCompareXMLToArgvValidateSchema' to
testQemuGetRealCaps as an optional step.
This will simplify using QMP command validation in other tests which
will use testQemuGetRealCaps.
'testutilsqemuschema' module is now linked into 'test_utils_qemu' as it
contains no monitor-specific code itself and after this patch it's
referenced directly from that module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover the same scenarios as the matching test cases for
autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is identical to the existing
firmware-auto-efi-loader-path-nonstandard test case, but uses
a standard firmware path.
Right now the two test cases behave identically, but that's
going to change in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This unifies the naming between the manual and automatic
selection cases, clarifies the contents of the tests and makes
room for more tests being added in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While no part of cmd line building process currently depends on a
host NUMA configuration, this will change soon. Use freshly
changed virnumamock from qemuxml2argvtest and make the mock read
NUMA data from vircaps2xmldata which seems to have the most rich
NUMA configuration.
This also means, we have to start building virnumamock
unconditionally. But this is not a problem, since nothing inside
of the mock relies on Linux specificity. The whole mock is merely
just reading files and parsing them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't set any capability and we don't want to add
arch-dependent always-peresent capabilities in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP and QEMU_CAPS_LOADPARM
are always asserted via virQEMUCapsInitQMPBasicArch thus don't need to
be explicitly enabled by tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testUpdateQEMUCaps calls virQEMUCapsInitQMPBasicArch which already sets
it. Purge the capability from the testing code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemu-system-aarch64' is superset of the soon to be deprecated
'qemu-system-arm' binary. We can move over all of our fake-caps tests to
real caps on aarch64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the 'ppc-dtb' and 'ppce500-serial' to use real capabilities
albeit captured from a non-native machine. Thus the XML needs to be
converted to use virt type 'qemu'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the only outstanding test case for a 'sparc' machine to modern
test infrastructure.
'sparc' machine type also needs to be added to the list of supported
arches in testQemuGetLatestCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make callers use virFileCacheClear to clear the cache before populating
it rather than trying to overwrite what's in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use x86_64 emulator and machine and remove the nocaps version of the
test.
Fixes: 80a37e96a9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of these settings is specific to the xml2argv test. Moving
them to the common code ensures the behavior of the QEMU driver
is consistent across all QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Creating a privileged config ensures these are already set
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Most test programs were already doing this, and moving it to
the common code ensures we see consistent behavior across all
QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These are intended to be used for just a few specific tests,
but since we don't always free them up afterwards they could
end up accidentally affecting subsequent tests as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Follow the example of other similar settings and only enable it
for the few test cases that are actually about the specific
functionality, disabling it immediately afterwards.
A few test cases that were completely unrelated to SPICE TLS no
longer see the effects of having the feature enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like TLSx509certdirs, these can be set throughout the
lifetime of the test program.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The various TLSx509certdirs can be set throughout the lifetime
of the test program without issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use latest caps for the tests even though the original test case didn't
need any capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions now support iothreads thus upcoming patches
will be removing the capability checks. Remove the 'iothreads-nocap'
case which will become invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the qemuxml2xml variant and add output data for qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
