Support for firewalld is a feature that can be selectively enabled or
disabled (using --with-firewalld/--without-firewalld), not merely
something that must be accounted for in the code if it is present with
no exceptions. It is more consistent with other usage in libvirt to
use WITH_FIREWALLD rather than HAVE_FIREWALLD.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the query callbacks want to know the firewall layer that was
being used for triggering the query to avoid duplicating that data.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 57f5621f modified nwfilterInstantiateFilter to detect when
a filter binding was already present before attempting to add the
new binding and instantiate it. Additionally, the change to
nwfilterStateInitialize to call virNWFilterBindingObjListLoadAllConfigs
(from commit c21679fa3f) to load active domain filter bindings, but
not instantiate them eventually leads to a problem for the QEMU
driver reconnection logic after a daemon restart where the filter
bindings would no longer be instantiated.
Subsequent commit f14c37ce4c replaced the nwfilterInstantiateFilter
with virDomainConfNWFilterInstantiate which uses @ignoreExists to
detect presence of the filter and still did not restore the filter
instantiation call when making the new nwfilter bindings logic active.
Thus in order to instantiate any active domain filter, we will call
virNWFilterBuildAll with 'false' to indicate the need to go through
all the active bindings calling virNWFilterInstantiateFilter to
instantiate the filter bindings.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the learning thread is configured to learn on all ethernet frames
(which is hardcoded) then chances are high that there is a packet on
every iteration of inspecting frames loop. As result we will hang on
shutdown because we don't check threadsTerminate if there is packet.
Let's just check termination conditions on every iteration. Since
we'll check each iteration, the check after pcap_next essentially
is unnecessary since on failure we'd loop back to the top and timeout
and then fail.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the fetch of @ipAddrLeft to after the goto skip_instantiate
and remove the (req->binding) guard since we know that as long
as req->binding is created, then req->threadkey is filled in.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Similar to nwfilterDefineXML, let's be sure the a filter binding
creation is not attempted in session mode and generate the proper
error message.
Failure to open nwfilter in session mode (nwfilterConnectOpen)
fails already, but that doesn't stop the free thinker from using
a different connection in order to attempt to attempt to create
the binding. Although even doing that would result in a failure:
$ virsh nwfilter-binding-create QEMUGuest1-binding.xml
error: Failed to create network filter from QEMUGuest1-binding.xml
error: internal error: Could not get access to ACL tech driver 'ebiptables'
$
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1599973
Commit id fca9afa08 changed the @req->ifname to use
@req->binding->portdevname fillingin the @req->binding
in a similar way that @req->ifname would have been
filled in during virNWFilterDHCPSnoopReq processing.
However, in doing so it did not take into account some
code paths where the @req->binding should be checked
instead of @req->binding->portdevname. These checks
led to SEGVs in some cases during libvirtd reload
processing in virNWFilterSnoopRemAllReqIter (for
stop during nwfilterStateCleanup processing) and
virNWFilterSnoopReqLeaseDel (for start during
nwfilterStateInitialize processing).
In particular, when reading the nwfilter.leases file
a new @req is created, but the @req->binding is not
filled in. That's left to virNWFilterDHCPSnoopReq
processing which checks if the @req already exists
in the @virNWFilterSnoopState.snoopReqs hash table
after adding a virNWFilterSnoopState.ifnameToKey
entry for the @req->binding->portdevname by a
@ref->ikey value.
NB: virNWFilterSnoopIPLeaseInstallRule and
virNWFilterDHCPSnoopThread do not need the
req->binding check since they can only be called
after the filter->binding is created/assigned.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The same check is done by virNWFilterBindingObjListAdd(). The main
issue with the current code is that if the object already exists we
would leak 'def' because 'obj' would be set and the cleanup code frees
'def' only if 'obj' is NULL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function nwfilterBindingCreateXML() is failing to compile due to a
conditional branch which leads to an undefined 'obj' variable. So 'obj'
must have an initial value to avoid compilation errors. See the problem:
CC nwfilter/libvirt_driver_nwfilter_impl_la-nwfilter_driver.lo
nwfilter/nwfilter_driver.c:752:9: error: variable 'obj' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (virNWFilterBindingCreateXMLEnsureACL(conn, def) < 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nwfilter/nwfilter_driver.c:779:10: note: uninitialized use occurs here
if (!obj)
^~~
nwfilter/nwfilter_driver.c:752:5: note: remove the 'if' if its condition is always false
if (virNWFilterBindingCreateXMLEnsureACL(conn, def) < 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nwfilter/nwfilter_driver.c:742:33: note: initialize the variable 'obj' to silence this warning
virNWFilterBindingObjPtr obj;
^
= NULL
This commit initialized 'obj' with NULL to fix the error properly.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the callbacks that the nwfilter driver registers with the domain
object config layer. Instead make the current helper methods call into
the public API for creating/deleting nwfilter bindings.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This allows the virsh commands nwfilter-binding-create and
nwfilter-binding-delete to be used.
Note using these commands lets you delete filters that were
previously created automatically by the virt drivers, or add
filters for VM nics that were not there before. Generally it
is expected these new APIs will only be used by virt drivers.
It is the admin's responsibility to not shoot themselves in
the foot.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the ListAll, LookupByPortDev and GetXMLDesc APIs to allow the
virsh nwfilter-binding-list & nwfilter-binding-dumpxml commands to
work.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the nwfilter driver does not keep any record of what filter
bindings it has active. This means that when it needs to recreate
filters, it has to rely on triggering callbacks provided by the virt
drivers. This introduces a hash table recording the virNWFilterBinding
objects so the driver has a record of all active filters.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the virNWFilterBindingDefPtr struct in the DHCP address snooping code
directly.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the virNWFilterBindingDefPTr struct in the IP address learning code
directly.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the virNWFilterBindingDefPtr struct in the gentech driver code
directly.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The compilation fails with the following error when pcap-config
is not present on the host:
nwfilter/nwfilter_learnipaddr.c:824:1: error: conflicting types for 'virNWFilterLearnIPAddress'
virNWFilterLearnIPAddress(virNWFilterTechDriverPtr techdriver ATTRIBUTE_UNUSED,
In file included from nwfilter/nwfilter_learnipaddr.c:57:0:
nwfilter/nwfilter_learnipaddr.h:38:5: note: previous declaration of 'virNWFilterLearnIPAddress' was here
int virNWFilterLearnIPAddress(virNWFilterTechDriverPtr techdriver,
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When a QEMU VM shuts down its TAP device gets deleted while nwfilter
IP address learning thread is still capturing packets. It is seen that
with TPACKET_V3 support in libcap, the pcap_next() call will not always
exit its poll() when the NIC is removed. This prevents the learning
thread from exiting which blocks the rest of libvirtd waiting on mutex
acquisition. By switching to do poll() in libvirt code, we can ensure
that we always exit the poll() at a time that is right for libvirt.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In a previous commit:
commit d4bf8f4150
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 14 09:43:59 2018 +0000
nwfilter: handle missing switch enum cases
Ensure all enum cases are listed in switch statements, or cast away
enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
we changed a switch in the nwfilter learning thread so that it had
explict cases for all enum entries. Unfortunately the parameters in the
method had been declared with incorrect type. The "howDetect" parameter
does *not* accept "enum howDetect" values, rather it accepts a bitmask
of "enum howDetect" values, so it should have been an "int" type.
The caller always passes DETECT_STATIC|DETECT_DHCP, so essentially the
IP addressing learning was completely broken by the above change, as it
never matched any switch case, hitting the default leading to EINVAL.
Stop using a typedef for the parameter name this this is a bitmask,
not a plain enum value. Also stop using switch() since that's misleading
with bitmasks too.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The vm name is not needed for any functional requirement, but it will be
useful when debugging problems to identify which VM is associated with a
filter, since UUID is not human friendly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The filter parameters were not correctly free'd when an error hits while
adding to the hash table.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a bunch of left over code in the nwfilter driver related to
monitoring firewalld over dbus, that is no longer used since the
conversion to use virFirewall APIs.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterIPAddrLearnReq type should only be used by the IP address
learning code, so can live in the implementation file instead of header
file.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Various methods return a virNWFilterIPAddrLearnReq struct, but the
callers are only interested in whether the return value is non-NULL.
It is thus preferrable to just return a bool.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All the code now just uses the virHashTablePtr type directly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the virNWFilterHashTableFree, virNWFilterHashTablePut
and virNWFilterHashTableRemove methods, in favour of just calling
the virHash APIs directly.
The virNWFilterHashTablePut method was unreasonably complex because
the virHashUpdateEntry already knows how to create the entry if it
does not currently exist.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterHashTable struct only contains a single virHashTable
member since
commit 293d4fe2f1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Mar 24 16:35:23 2014 +0000
Remove pointless storage of var names in virNWFilterHashTable
Thus, this struct wrapper adds no real value over just using the
virHashTable directly, but brings the complexity of needing to derefence
the hashtable to call virHash* APIs, and adds extra memory allocation
step.
To minimize code churn this just turns virNWFilterHashTable into a
typedef aliases virHashTable.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When an nwfilter rule sets the parameter CTRL_IP_LEARNING to "dhcp",
this turns on the "dhcpsnoop" thread, which uses libpcap to monitor
traffic on the domain's tap device and extract the IP address from the
DHCP response.
If libpcap on the host is built with HAVE_TPACKET3 defined (to enable
support for TPACKET_V3), the dhcpsnoop code's initialization of the
libpcap socket would fail with the following error:
virNWFilterSnoopDHCPOpen:1134 : internal error: pcap_setfilter: can't remove kernel filter: Bad file descriptor
It turns out that this was because TPACKET_V3 requires a larger buffer
size than libvirt was setting (we were setting it to 128k). Changing
the buffer size to 256k eliminates the error, and the dhcpsnoop thread
once again works properly.
A fuller explanation of why TPACKET_V3 requires such a large buffer,
for future git spelunkers:
libpcap calls setsockopt(... SOL_PACKET, PACKET_RX_RING...) to setup a
ring buffer for receiving packets; two of the attributes sent to this
API are called tp_frame_size, and tp_frame_nr. If libpcap was built
with HAVE_TPACKET3 defined, tp_trame_size is set to MAXIMUM_SNAPLEN
(defined in libpcap sources as 262144) and tp_frame_nr is set to:
[the buffer size we set, i.e. PCAP_BUFFERSIZE i.e. 262144] / tp_frame_size.
So if PCAP_BUFFERSIZE < MAXIMUM_SNAPLEN, then tp_frame_nr (the number
of frames in the ring buffer) is 0, which is nonsensical. This same
value is later used as a multiplier to determine the size for a call
to malloc() (which would also fail).
(NB: if HAVE_TPACKET3 is *not* defined, then tp_frame_size is set to
the snaplen set by the user (in our case 576) plus a small amount to
account for ethernet headers, so 256k is far more than adequate)
Since the TPACKET_V3 code in libpcap actually reads multiple packets
into each frame, it's not a problem to have only a single frame
(especially when we are monitoring such infrequent traffic), so it's
okay to set this relatively small buffer size (in comparison to the
default, which is 2MB), which is important since every guest using
dhcp snooping in a nwfilter rule will hold 2 of these buffers for the
entire life of the guest.
Thanks to Christian Ehrhardt for discovering that buffer size was the
problem (this was not at all obvious from the error that was logged!)
Resolves: https://bugzilla.redhat.com/1547237
Fixes: https://bugs.launchpad.net/libvirt/+bug/1758037
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> (V1)
Reviewed-by: John Ferlan <jferlan@redhat.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A problem encountered due to a bug in libpcap was reported to the
caller as:
An error occurred, but the cause is unknown
This was because the error had been logged in the DHCPSnoop
thread. The worker thread handling the API call to start a domain
spins up the DHCPSnoop thread which watches for dhcp packets with
libpcap, then uses virCondSignal() to notify the worker thread (which
has been waiting with virCondWait()). The worker thread knows that
there was an error (because threadStatus != THREAD_STATUS_OK), but the
error info had been stored in thread-specific storage for the other
thread, so the worker thread can only report that there was a failure,
but it doesn't know why.
The solution is to save the error that was logged (with
virErrorPreserveLast() into the object the is used to share info
between the threads, then we can set the error in the worker thread
using virErrorRestore().
In the case of the error I was looking at, this changed the "unknown"
message into:
internal error: pcap_setfilter: can't remove kernel filter:
Bad file descriptor
Signed-off-by: Laine Stump <laine@laine.org>
Ensure all enum cases are listed in switch statements, or cast away
enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These two objects are used to access fields in actual ethernet packets
captures with libpcap, so it's essential that they don't change size
for any reason. This patch uses gnulib's verify() macro to make sure
their sizes don't change.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the storage
driver, by defining a nwfilter:///system URI and registering a fake
hypervisor driver that supports it.
The hypervisor drivers can now directly open a nwfilter driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The unprivileged libvirtd does not support nwfilter config, by leaves the
driver active. It is supposed to result in all APIs being an effective
no-op, but several APIs rely on driver->nwfilters being non-NULL, or they
will reference a NULL pointer. Rather than adding checks for NULL in many
places, just make sure driver->nwfilters is always initialized.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
