Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:
./test-lib.sh: line 21: realpath: command not found
for every shell script test, because 'realpath' was not part of
coreutils back then.
* tests/test-lib.sh (_scriptdir): Compute with only portable shell.
Signed-off-by: Eric Blake <eblake@redhat.com>
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.
This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.
A future patch would then be able to avoid the code more cleanly
Signed-off-by: John Ferlan <jferlan@redhat.com>
By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.
Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.
This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.
It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.
rbd_open_read_only() is available in all librbd versions which
also support rbd_open().
Signed-off-by: Wido den Hollander <wido@widodh.nl>
RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.
The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.
If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.
rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.
It will use the same features, strip size and stripe count as the parent image.
This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.
During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().
The latter is faster, but only available on Ceph versions after 0.94 (Hammer).
Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.
If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()
Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.
Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.
rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.
This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.
It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).
Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.
Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.
This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).
Signed-off-by: John Ferlan <jferlan@redhat.com>
The affected functions are:
virPCIDeviceGetManaged()
virPCIDeviceGetUnbindFromStub()
virPCIDeviceGetRemoveSlot()
virPCIDeviceGetReprobe()
Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.
Suggested-by: John Ferlan <jferlan@redhat.com>
In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unbinding a PCI device from the stub driver can require several steps,
and it can be useful for debugging to be able to trace which of these
steps are performed and which are skipped for each device.
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
Commit 871e10f fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
In 370608b4c7 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted. To reproduce:
ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system
Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***
The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.
The fix: Only overwrite the newline if the string is not empty.
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
In the following cases nl_recv() was returning the error "No buffer
space available":
* When switching CPUs to offline/online in a system more than 128 cpus
* When using virsh to destroy domain in a system with many interfaces
This patch sets the buffer size for all netlink sockets created by
libnl to 128K and turns on message peeking for nl_recv(). This
eliminates the "No buffer space available" errors seen in the cases
above, and also preempts other future errors the smaller buffers could
have caused.
Signed-off-by: Leno Hou <houqy@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In dc576025c3 we renamed virCgroupIsolateMount function to
virCgroupBindMount. However, we forgot about one occurrence in
section of the code which provides stubs for platforms without
support for CGroups like *BSD for instance.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the host when we start a container, it will be
placed in a cgroup path of
/machine.slice/machine-lxc\x2ddemo.scope
under /sys/fs/cgroup/*
Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.
While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup
This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg
/machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope
This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup
Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_STATS_VCPU flag to virDomainListGetStats
enables reporting of stats about vCPUs. Currently we
only report the cumulative CPU running time and the
execution state.
This adds reporting of the wait time - time the vCPU
wants to run, but the host scheduler has something else
running ahead of it.
The data is reported per-vCPU eg
$ virsh domstats --vcpu demo
Domain: 'demo'
vcpu.current=4
vcpu.maximum=4
vcpu.0.state=1
vcpu.0.time=1420000000
vcpu.0.wait=18403928
vcpu.1.state=1
vcpu.1.time=130000000
vcpu.1.wait=10612111
vcpu.2.state=1
vcpu.2.time=110000000
vcpu.2.wait=12759501
vcpu.3.state=1
vcpu.3.time=90000000
vcpu.3.wait=21825087
In implementing this I notice our reporting of CPU execute
time has very poor granularity, since we are getting it
from /proc/$PID/stat. As a future enhancement we should
prefer to get CPU execute time from /proc/$PID/schedstat
or /proc/$PID/sched (if either exist on the running kernel)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
From the code it seems to me that we need user namespace if
configured in domain XML. Otherwise we don't use it at all.
However our tool is more strict about that. Fix this discrepancy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the introduction of virt-host-validate tool the set of
cgroup controllers we use has changed so the tool is checking for
some cgroups that we don't need (e.g. net_cls, although I doubt
we have ever used that one) and is not checking for those we
actually use (e.g. cpuset).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
