Use 'virReportEnumRangeError' for the invalid cases and keep the
original error for known but unsupported chardevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the addition of the command wrapper to qemuMonitorJSONAttachCharDev
and rename the function to qemuMonitorJSONAttachCharDevGetProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuMonitorJSONMakeCommandInternal' instead of
'qemuMonitorJSONMakeCommand' + 'virJSONValueObjectAppend'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the first argument to a double pointer so that later the function
can be unified with virJSONValueObjectCreate and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The upcoming QEMU 6.2.0 implements a new event called
DEVICE_UNPLUG_GUEST_ERROR, a new event that reports generic device
unplug errors that were detected by the guest and reported back to QEMU.
This new event is going to be specially useful for pseries guests that
uses newer kernels (must have kernel commit 29c9a2699e71), which is the
case for Fedora 34 at this moment. These guests have the capability of
reporting CPU removal errors back to QEMU which, starting in 6.2.0, will
emit the DEVICE_UNPLUG_GUEST_ERROR event. Libvirt can use this event to
abort the device removal immediately instead of waiting for 'setvcpus'
timeout.
QEMU 6.2.0 is also going to emit DEVICE_UNPLUG_GUEST_ERROR for memory
hotunplug errors, both in pseries and ACPI guests. QEMU 6.1.0 reports
memory removal errors using the MEM_UNPLUG_ERROR event, which is going to
be deprecated by DEVICE_UNPLUG_GUEST_ERROR in 6.2.0. Given that
Libvirt wasn't handling the MEM_UNPLUG_ERROR event we don't need to
worry about it - adding support to DEVICE_UNPLUG_GUEST_ERROR will be
enough to cover all future cases.
This patch adds support to DEVICE_UNPLUG_GUEST_ERROR by adding the
minimal wiring required for Libvirt to be aware of it. The monitor
callback for this event will abort the pending removal operation of the
device reported by the "device" property of the event. Most of the heavy
lifting is already done by existing code that handles
QEMU_DOMAIN_UNPLUGGING_DEVICE_STATUS_GUEST_REJECTED, making our life
easier to abort the pending removal operation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the 'query-nodes' flag to return all stats. The flag was introduced
prior to qemu-2.11 so we can always use it, but we invoke it only when
querying stats. The other invocation is used for detecting the nodenames
which is fragile code.
The images without a frontend don't have the device field so the
extraction code checks need to be relaxed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Open code virHashAddEntry so that the error code path can be avoided.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, some 'error' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto error' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
After previous cleanups, some 'cleanup' labels were rendered
needless - they contain nothing more than a return statement.
Well, those labels can be dropped and 'goto cleanup' can be
replaced with return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Let's replace VIR_FREE() calls with g_autofree. Not all calls can
be replaced though - the legitimate ones are kept (e.g. those
which free array, or which free a struct for which we don't have
g_autoptr() yet, and so on).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
A lot of explicit free calls can be saved when virJSONValue
variables are declared with g_autoptr(). There's one caveat:
there was a slight deviation from our usual pattern such that
@cmd variable was not initialized to NULL but as the very first
step it was assigned a value using qemuMonitorJSONMakeCommand().
While this works in theory it upset my GCC-11.2 (but only when
building with -O2). So I had to initialize the variable in such
case too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The reason why @entry variable in qemuMonitorJSONExtractPRManagerInfo()
was declared at the top most level was that the variable is used under
the cleanup label. However, if declared using g_autofree then the
variable can be declared inside the loop it is used in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There's one place (specifically qemuMonitorJSONParseCPUModel())
where we can avoid explicit free call for qemuMonitorCPUModelInfo
struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We have g_autoptr() for virCPUData struct defined already. Let's
use it in qemu_monitor_json.c and drop explicit free calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorJSONQueryRxFilterParse() function is called to
parse the output of 'query-rx-filter' and store results into
passed virNetDevRxFilter structure. However, it is doing so in a
bit clumsy way - the return pointer is set in all cases (i.e.
even in case of error) and thus the cleanup label is more
complicated than it needs to be. With a help of g_autoptr() and
g_steal_pointer() the return pointer can be set only in case of
success - which is what callers expect anyway.
The same applies to qemuMonitorJSONQueryRxFilter().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In the qemuMonitorJSONGetMigrationStats() there's a code under
cleanup label that's clearing returned @stats if the function
returns with an error. However, transitively there's just one
caller - qemuMigrationAnyFetchStats() - and it doesn't care for
this behaviour. Drop the code to simplify the cleanup label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
All callers of qemuMonitorJSONHumanCommand() pass a non-NULL pointer
as @reply_str therefore there's no need to check whether it is NULL.
NB, the sister function (qemuMonitorJSONArbitraryCommand()) doesn't
check for NULL either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In qemuMonitorJSONCommandWithFd() given command (represented by
virJSONValue struct) is translated to string (represented by
virBuffer). The ownership of the string is then transferred to
the message which is then sent. The downside of this approach is
we have to have an explicit call to free the string from the
message. But if the message just "borrowed" the string (which it
can safely do because it is just reading from the string) then
automatic free of the buffer takes care of freeing the string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorNextCommandID() function can never fail. There's
no need to check for its retval then. Moreover, the temporary
variable used to hold the retval can be declared in the inner
most block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The qemuMonitorJSONGetMigrationCapabilities() command executes
'query-migrate-capabilities' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 1.2 (specifically in commit v1.2.0-rc0~29^2~11) and
since the minimum required version is 2.11.0 we can be sure that
command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetMemoryDeviceInfo() command executes
'query-memory-devices' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 2.1 (specifically in commit v2.1.0-rc0~41^2~9) and
since the minimum required version is 2.11.0 we can be sure that
command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetKVMState() command executes 'query-kvm'
command and returns early if QEMU doesn't know the command. Well,
the command was introduced in QEMU release 0.14 and since the
minimum required version is 2.11.0 we can be sure that command
will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetDumpGuestMemoryCapability() command
executes 'query-dump-guest-memory-capability' command and returns
early if QEMU doesn't know the command. Well, the command was
introduced in QEMU release 2.0 (specifically in commit
v2.0.0-rc0~43^2~16) and since the minimum required version is
2.11.0 we can be sure that command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONGetMigrationParams() function executes
'query-migrate-parameters' command and returns early if QEMU
doesn't know the command. Well, the command was introduced in
QEMU release 2.4 (specifically in commit v2.4.0-rc0~147^2~3) and
since the minimum required version is 2.11.0 we can be sure that
the command will always exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always fetch the stats for all backing chain members. Callers from
qemu_driver.c already always passed 'true' and the caller from the
migration code won't mind when we fetch all stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All (proper) callers pass true so we can remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing and remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the old-style 'device_add' helpers which parse the commandline
arguments to JSON since we now coverted all usage to use JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing and remove 'ret' variable and 'cleanup'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We commonly use 'props' for the JSON object describing something. Rename
the monitor device addition code.
Additionally the common approach is to clear the pointer if it was
consumed so the arguments are adjusted to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the QEMU driver restarts it loses the track of the current size
of virtio-mem (because it's runtime type of information and thus
not stored in XML) and therefore, we have to refresh it when
reconnecting to the domain monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in one of previous commits, we want to be able to
change 'requested-size' attribute of virtio-mem on the fly. This
commit does exactly that. Changing anything else is checked for
and forbidden.
Once guest has changed the allocation, QEMU emits an event which
we will use to track the allocation. In the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autofree for the JSON values to remove cleanup label and ret
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuMonitorJSONCheckError instead of handcrafted error reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu process code doesn't register a callback for it so we don't
need to be handling it at all.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
