Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device. The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
Coverity complains that checking for domain->def being non NULL in the
if (live) path of virDomainObjAssignDef() would be unnecessary or a
NULL deref since the call to virDomainObjIsActive() would already
dereference domain->def when checking if the def->id field was != -1.
Checked all callers to virDomainObjAssignDef() and each at some point
dereferences (vm)->def->{field} prior to calling when live is true.
In virDomainActualNetDefFormat() a call to virDomainNetGetActualType(def)
was made before a check for (!def) a few lines later. This triggered
Coverity to note the possible NULL deref. Just moving the initialization
to after the !def checks resolves the issue
While working on virDomainBlockCopy, I noticed we had a verify()
concerning internal XML flags that was incomplete after several
recent flag additions; move that up higher in the code to make it
harder to forget to modify on the next flag addition. Adjust
some formatting while at it.
* src/conf/domain_conf.c (verify): Move closer to internal flag
definitions. Cover missing flags ALLOW_ROM and ALLOW_BOOT.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load. Domain XML syntax is as follows:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
...
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated. While at it, I found a
couple of other double semicolons. Additionally, I noticed that
commit df0b57a95 left a stale reference to the file name
remote_dispatch_bodies.h.
* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
When trying to set an invalid value into iotune element, standard
behavior was to not report any error, rather to reset all affected
subelements of the iotune element back to 0 which results in ignoring
those particular subelements by XML generator. Patch further
examines the return code of the virXPathULongLong function
and in case of an invalid non-integer value raises an error.
Fixed to preserve consistency with invalid value checking
of other elements.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1131811
When trying to set numatune mode directly using virsh numatune command,
correct error is raised, however numatune structure was not deallocated,
thus resulting in creating an empty numatune element in the guest XML,
if none was present before. Running the same command aftewards results
in a successful change with broken XML structure. Patch fixes the
deallocation problem as well as checking for invalid attribute
combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998
When formatting the forward mode addresses or interfaces the switch was
done based on the type of the network rather than of the type of the
individual <interface>/<address> element. In case a user would specify
an incorrect network type ("passhtrough") with <address> elements,
libvirtd would crash as it would attempt to format an <interface>.
Use the type of the individual element to format the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132347
Tidy up control flow, change boolean argument to use 'bool', improve
error message in case the function is used to parse emulator pinning
info and avoid a few temp variables that made no sense.
Also when the function is called to parse emulator pinning info, there's
no need to check the processor ID in that case.
The check doesn't make much sense as right below it the entries are
either checked for duplicity or ignored in some cases. Having this check
doesn't actually forbid passing invalid values.
commit d9504941 introduces two new attributes "cmd_per_lun" and
"max_sectors" same with the names QEMU uses for virtio-scsi.
But the case of parsing them is not exact. Change to parse
them if controller has "driver" element.
Signed-off-by: Mo yuxiang <moyuxiang@huawei.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
https://bugzilla.redhat.com/show_bug.cgi?id=1128751
There's this <driver/> element under <interface/> which can have
several attributes. However, the driver element is currently formated
only if the driver's name or txmode has been specified. This makes
only a little sense as we parse even partial <driver/>, for instance:
<interface type='user'>
<mac address='52:54:00:e5:48:58'/>
<model type='virtio'/>
<driver ioeventfd='on' event_idx='on' queues='5'/>
</interface>
But such XML would never get formatted back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).
The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:
<hostdev mode='subsystem' type='scsi' managed='yes'>
<source protocol='iscsi' name='iqn.1992-01.com.example'>
<host name='example.org' port='3260'/>
<auth username='myname'>
<secret type='iscsi' usage='mycluster_myname'/>
</auth>
</source>
<address type='drive' controller='0' bus='0' target='2' unit='5'/>
</hostdev>
The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
In preparation for hostdev support for iSCSI and a virStorageNetHostDefPtr,
split out the network disk storage parsing of the 'host' element into a
separate routine.
Fix a comment in virDomainAuditNetDevice.
Fix a typo in comment of qemuPhysIfaceConnect which is
the caller of virDomainAuditNetDevice.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
RNG schema as well as the qemu driver requires absolute paths for memory
and disk snapshot image files but the XML parser was not enforcing it.
Add checks to avoid problems in qemu where the configuration it creates
is invalid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1126329
In a system with Fiber Channel Host Adapters, a query to list all Fibre Channel
HBAs OR Vports currently returns empty list:
$ virsh nodedev-list --cap fc_host
$
Libvirt correctly discovers properties for all HBAs. However, the reporting
fails because of incorrect flag comparison while filtering these types.
This is fixed by removing references to 'VIR_CONNECT_LIST_NODE_DEVICES_CAP_*'
for comparison and replacing those with 'VIR_NODE_DEV_CAP_*'
Introduced by original commit id '652a2ec6'
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element. This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>. Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit). It also prepares to update persistent XML
to match changes made to live XML when a copy completes.
* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
If all features are set to default (including the capabilities policy),
but some capabilities are toggled, we need to output the <features>
element when formatting the config.
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment. In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job. Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.
A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion. But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job. Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job. Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.
Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.
* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:
==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816== by 0x50836FB: virAlloc (viralloc.c:144)
==9816== by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816== by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)
* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Finding virPCIE* code is more intuitive if located in virpci.h
instead of node_device_conf.h.
* src/conf/node_device_conf.h (virPCIELinkSpeed, virPCIELink)
(virPCIEDeviceInfo): Move...
* src/util/virpci.h: ...here.
* src/conf/node_device_conf.c (virPCIELinkSpeed): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The compiler can alert us to places where we need to expand switch
statements because we add a new enum value, but only if we don't
have a default case.
* src/conf/node_device_conf.c (virNodeDeviceDefFormat)
(virNodeDevCapsDefParseXML, virNodeDevCapsDefFree): Drop default
case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libvirt documents that the default entropy source for the 'random'
backend of a RNG device is /dev/random. Instead of storing and
propagating NULL across our code and checking it in multiple places fill
the default in the post parse callback and use that in the other places.
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our seclabel parsing was repeatedly assigning malloc'd data into a
temporary variable, without first freeing the previous use. Among
other leaks flagged by valgrind:
==9312== 8 bytes in 1 blocks are definitely lost in loss record 88 of 821
==9312== at 0x4A0645D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9312== by 0x8C40369: strdup (strdup.c:42)
==9312== by 0x50EA799: virStrdup (virstring.c:676)
==9312== by 0x50FAEB9: virXPathString (virxml.c:90)
==9312== by 0x50FAF1E: virXPathStringLimit (virxml.c:112)
==9312== by 0x510F516: virSecurityLabelDefParseXML (domain_conf.c:4571)
==9312== by 0x510FB20: virSecurityLabelDefsParseXML (domain_conf.c:4720)
While it was multiple problems, it looks like commit da78351 (thankfully
unreleased) was to blame for all of them.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Plug leaks
detected by valgrind.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
