The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
When doing migration, if an error occurs in Perform, it must not
be overwritten during Finish/Confirm steps. If an error occurs
in Finish, it must not be overwritten in Confirm.
Previous commit a9d12c2444 added
code to qemudDomainMigrateFinish2 to preserve the error. This
is not the right place, because it is not applicable in non-p2p
migration. The src/libvirt.c virDomainMigrateV2/3 methods need
code to preserve errors for non-p2p migration, while the
doPeer2PeerMigrate2 and doPeer2PeerMigrate3 methods contain
code to preverse errors for p2p migration.
Remove the bogus error preservation from qemudDomainMigrateFinish2
and qemudDomainMigrateFinish3.
Fix virDomainMigrateV3 and doPeer2PeerMigrate3 so that they
preserve any error hit during the Finish3 step, before invoking
Confirm3.
Finally if qemuMigrationFinish fails to resume the CPUs, it must
preserve the error before tearing down the VM, so that VM cleanup
doesn't overwrite it.
* src/libvirt.c: Preserve error before invoking Confirm3
* src/qemu/qemu_driver.c: Remove bogus error preservation
code in qemudDomainMigrateFinish2/qemudDomainMigrateFinish3
* src/qemu/qemu_migration.c: Preserve error before invoking Confirm3
and after resume fails in qemuMigrationFinish.
* src/libvirt.c: Add further debug lines in helper APIs for
migration
* src/qemu/qemu_migration.c: Add debug lines for all internal
migration API parameters
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
The internal virDomainMigratePeer2Peer and virDomainMigrateDirect
helper methods were not checking whether the target supports the
v3 migration protocol.
* src/libvirt.c: Use v3 migration protocol for p2p/direct
migration if available.
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).
Add subset handling to libxl and test drivers.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
virStreamNew needs to dispatch the error that virGetStream reports
on failure.
remoteCreateClientStream can fail due to virStreamNew or due to
VIR_ALLOC. Report OOM error for VIR_ALLOC failure to report errors
in all error cases.
Remove OOM error reporting from remoteCreateClientStream callers.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
The v2 migration protocol was accidentally missing out the
finish step, when prepare succeeded, but returned an invalid
URI
* src/libvirt.c: Teardown VM if prepare returns invalid URI
Migration just seems to go from bad to worse. We already had to
introduce a second migration protocol when adding the QEMU driver,
since the one from Xen was insufficiently flexible to cope with
passing the data the QEMU driver required.
It turns out that this protocol still has some flaws that we
need to address. The current sequence is
* Src: DumpXML
- Generate XML to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Kill off VM if successful, resume if failed
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if unsuccessful
The problems with this are:
- Since the first step is a generic 'DumpXML' call, we can't
add in other migration specific data. eg, we can't include
any VM lease data from lock manager plugins
- Since the first step is a generic 'DumpXML' call, we can't
emit any 'migration begin' event on the source, or have
any hook that runs right at the start of the process
- Since there is no final step on the source, if the Finish
method fails to receive all migration data & has to kill
the VM, then there's no way to resume the original VM
on the source
This patch attempts to introduce a version 3 that uses the
improved 5 step sequence
* Src: Begin
- Generate XML to pass to dst
- Generate optional cookie to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Generate optional cookie to pass to dst
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if failed, resume if success
- Generate optional cookie to pass to src
* Src: Confirm
- Kill off VM if success, resume if failed
The API is designed to allow both input and output cookies
in all methods where applicable. This lets us pass around
arbitrary extra driver specific data between src & dst during
migration. Combined with the extra 'Begin' method this lets
us pass lease information from source to dst at the start of
migration
Moving the killing of the source VM out of Perform and
into Confirm, means we can now recover if the dst host
can't successfully Finish receiving migration data.
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
The public API and RPC over-the-wire format have no flags argument,
so neither should the internal callback API. This simplifies the
RPC generator.
* src/driver.h (virDrvNWFilterDefineXML): Drop argument that does
not match public API.
* src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise.
* src/libvirt.c (virNWFilterDefineXML): Likewise.
* daemon/remote_generator.pl: Drop special case.
This one's tricker than the VIR_DEBUG0() removal, but the end
result is still C99 compliant, and reasonable with enough comments.
* src/libvirt.c (VIR_ARG10, VIR_HAS_COMMA)
(VIR_DOMAIN_DEBUG_EXPAND, VIR_DOMAIN_DEBUG_PASTE): New macros.
(VIR_DOMAIN_DEBUG): Rewrite to handle one argument, moving
multi-argument guts to...
(VIR_DOMAIN_DEBUG_1): New macro.
(VIR_DOMAIN_DEBUG0): Rename to VIR_DOMAIN_DEBUG_0.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
assert() is forbidden in libvirt code, and these two cases would
in fact never execute due to earlier error checks.
* src/libvirt.c: Remove assert() usage
This patch implements the code to support virDomainSetMaxMemory API,
and to support VIR_DOMAIN_MEM_MAXIMUM flag in qemudDomainSetMemoryFlags function.
As a result, we can change the maximum memory size of inactive QEMU guests.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Move "returns" keyword from beginning of API doc lines
when it does not describe return values.
Maybe the API doc extractor could be changed to look for
"returns: " to avoid such confusion.
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and
modifies virDomainSetMemoryFlags function to support it.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
This patch fix a simple bug in virDomainSetMemoryFlags function.
The patch sent before lacks the consideration of the case
where the driver doesn't support virDomainSetMemoryFlags API.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
As pointed on CVE-2011-1146, some API forgot to check the read-only
status of the connection for entry point which modify the state
of the system or may lead to a remote execution using user data.
The entry points concerned are:
- virConnectDomainXMLToNative
- virNodeDeviceDettach
- virNodeDeviceReAttach
- virNodeDeviceReset
- virDomainRevertToSnapshot
- virDomainSnapshotDelete
* src/libvirt.c: fix the above set of entry points to error on read-only
connections
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
A large number of return values used 'return (0)' instead
of simply 'return 0'. Remove all these redundant brackets
so the style is consistent throughout the file
* src/libvirt.c: Remove redundant brackets
