Commit Graph

517 Commits

Author SHA1 Message Date
Peter Krempa
d0805c27f5 tests: genericxml2xml: Add testing of backup XML files
Now that the parser and formatter are in place we can exercise it on
the test files.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Eric Blake
252958ee16 backup: Document new XML for backups
Prepare for new backup APIs by describing the XML that will represent
a backup.  The XML resembles snapshots and checkpoints in being able
to select actions for a set of disks, but has other differences.  It
can support both push model (the hypervisor does the backup directly
into the destination file) and pull model (the hypervisor exposes an
access port for a third party to grab what is necessary).  Add
testsuite coverage for some minimal uses of the XML.

The <disk> element within <domainbackup> tries to model the same
elements as a <disk> under <domain>, but sharing the RNG grammar
proved to be hairy. That is in part because while <domain> use
<source> to describe a host resource in use by the guest, a backup job
is using a host resource that is not visible to the guest: a push
backup action is instead describing a <target> (which ultimately could
be a remote network resource, but for simplicity the RNG just
validates a local file for now), and a pull backup action is instead
describing a temporary local file <scratch> (which probably should not
be a remote resource).  A future refactoring may thus introduce some
way to parameterize RNG to accept <disk type='FOO'>...</disk> so that
the name of the subelement can be <source> for domain, or <target> or
<scratch> as needed for backups. Future patches may improve this area
of code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Daniel P. Berrangé
4a4132b462 conf: don't use passed in caps in post parse method
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Daniel P. Berrangé
92d412149c conf: sanitize virDomainObjFormat & virDomainDefFormat* APIs
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Michal Privoznik
e7f16ddc94 tests: Make check-file-access.pl accept files through argv
The script needs two files to open:

  $(builddir)/test_file_access.txt, and
  $(srcdir)/file_access_whitelist.txt.

However, the script is opening the files from the $CWD which
won't work for a VPATH build. Make the script accept paths to the
files through @ARGV and tune the Makefile.am to pass them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-04 15:43:09 +01:00
Daniel P. Berrangé
1fbd80c42a tests: stop static linking to libvirt code in tests
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-04 12:08:21 +00:00
Daniel P. Berrangé
951bc5a0b1 tests: stop linking virt tests to secondary drivers
The hard dependancy between the virt drivers and the network
or storage drivers was removed quite a while back now, so
the tests no longer need to link to these drivers.

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-04 09:58:33 +00:00
Daniel Henrique Barboza
e03e27ee08 qemu_hotplug.c: adding qemuDomainGetUnplugTimeout
For some architectures and setups, device removal can take
longer than the default 5 seconds. This results in commands
such as 'virsh setvcpus' to fire timeout messages even if
the operation were successful in the guest, confusing the
user.

This patch sets a new 10 seconds unplug timeout for PPC64
guests. All other archs will keep the default 5 seconds
timeout.

Instead of putting 'if PPC64' conditionals inside qemu_hotplug.c
to set the new timeout value, a new function called
qemuDomainGetUnplugTimeout was added. The timeout value is then
retrieved when needed, by passing the correspondent DomainDef
object. This approach allows for different guest architectures
to have distint unplug timeout intervals, regardless of the
host architecture. This design also makes it easier to
modify/enhance the unplug timeout logic in the future
(allow for special timeouts for TCG domains, for example).

A new mock file was created to work with qemuhotplugtest.c,
given that the test timeout is significantly shorter than
the actual timeout value in qemu_hotplug.c.

The now unused 'qemuDomainRemoveDeviceWaitTime' global can't
be simply erased from qemu_hotplug.c though. Next patch will
remove it properly.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-13 15:03:40 -05:00
Pavel Hrdina
11a865b9f9 src: esx: generate source files into build directory
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
7b9cd113dc src: generate source files into build directory
This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.

Affected files are:
    src/admin/admin_protocol.{h,c}
    src/locking/lock_protocol.{h,c}
    src/logging/log_protocol.{h,c}
    src/lxc/lxc_monitor_protocol.{h,c}
    src/remote/{lxc,qemu,remote}_protocol.{h,c}
    src/rpc/{virkeepalive,virnet}protocol.{h,c}

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Andrea Bolognani
fa20e7b1bc tests: Rename domaincapsschemadata/ -> domaincapsdata/
The usual convention is to use ${foo}test.c for the test program
itself and either ${foo}data/ or ${foo}outdata/, depending on
whether it contains both input and output files or only the latter,
for the corresponding data directory.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:16 +02:00
Daniel P. Berrangé
cfbe9f1201 build: link to glib library
Add the main glib.h to internal.h so that all common code can use it.

Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.

This was feature was dropped in 2.46.0 with:

      commit 3be6ed60aa58095691bd697344765e715a327fc1
      Author: Alexander Larsson <alexl@redhat.com>
      Date:   Sat Jun 27 18:38:42 2015 +0200

        Deprecate and drop support for memory vtables

Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in

    commit 1f24b36607bf708f037396014b2cdbc08d67b275
    Author: Daniel P. Berrangé <berrange@redhat.com>
    Date:   Thu Sep 5 14:37:54 2019 +0100

        gmem: clarify that g_malloc always uses the system allocator

Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.

This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.

This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.

Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-14 10:54:42 +01:00
Daniel Henrique Barboza
65ec10e83f tests: add a test for driver.c:virConnectValidateURIPath()
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-11 12:20:08 -04:00
Daniel P. Berrangé
fd3b8fe7ad tests: delete objectlocking test code
The object locking test code is not run by any CI tests and has
bitrotted to the point where it isn't worth the effort to try to
fix it.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-10 12:49:52 +01:00
Marc-André Lureau
13248e1688 qemu: add vhost-user helpers
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.

qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-09-24 13:19:08 -04:00
Daniel P. Berrangé
2c52ecd960 util: purge all code for testing OOM handling
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.

Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-13 10:05:17 +01:00
Shivaprasad G Bhat
944a35d7f0 tests: Add test case for QEMU pci-hostdev hotplug
This patch adds hostdev test cases in qemuhotplugtest.c.

Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Roman Bolshakov
f6d6086dbf tests: Make references to global symbols indirect in test drivers
A library has to be built with -flat_namespace to get all references to
global symbols indirected. That can also be achieved with two-level
namespace interposition but we're not using explicit symbol
interposition since it's more verbose and requires massive changes to
the mocks.

This provides a way to interpose a mock for virQEMUCapsProbeHostCPU from
qemucpumock and fixes domaincapstest on macOS.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Roman Bolshakov
647c65186a tests: Remove -module flag for mocks
macOS has two kinds of loadable libraries: MH_BUNDLE, and MH_DYLIB.
bundle is used for plugins that are loaded with dlopen/dlsym/dlclose.
And there's no way to preload a bundle into an application. dynamic
linker (dyld) will reject it when finds it in DYLD_INSERT_LIBRARIES.

Unfortunately, a bundle is built if -module flag is provided to libtool.
The flag has been removed to build dylibs with ".dylib" suffix.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Roman Bolshakov
fde361083d tests: Add lib- prefix to all mocks
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.

While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD.  That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-23 11:26:26 +01:00
Jiri Denemark
8a62a1592a Revert "configure: Remove --enable-test-coverage"
This reverts commit f38d553e2d.

Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
2019-08-14 09:28:06 +02:00
Daniel Henrique Barboza
92832577d1 qemuxml2xmltest: Redirect access to FW descriptor dirs
If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.

Fixes: 5b9819eedc domain capabilities: Expose firmware auto selection feature
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-13 09:48:39 +02:00
Eric Blake
43686f362c backup: Add virsh-checkpoints test
Similar to virsh-snapshots. Provides decent coverage of the checkpoint
API, the test driver implementation, and the virsh access to the API.
A later patch will worry about testing that snapshots and checkpoints
are mutually exclusive (in part so it is easier to revert that when we
finally implement the interaction and lift that restriction).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
1a4df34a0f backup: Parse and output checkpoint XML
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.

Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag.  We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch).  But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema.  If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.

Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.

Signed-off-by: Eric Blake <eblake@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
d85842cfd7 backup: Document new XML for checkpoints
Prepare for new checkpoint APIs by describing the XML that will
represent a checkpoint.  The checkpoint XML is modeled heavily after
virDomainSnapshotPtr. See the docs for more details.

Add testsuite coverage for some minimal uses of the XML (bare minimum,
the sample from html, and a full dumpxml, and some counter-examples
that should fail schema validation). Although use of the REDEFINE flag
will require the <domain> subelement to be present, it is easier for
most of the tests to provide counterpart output produced with the
NO_DOMAIN flag (particularly since synthesizing a valid <domain>
during testing is not trivial).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Cole Robinson
fb9f6ce625 network: wire up dnsmasq option xmlns
This maps to XML like:

  <network xmlns:dnsmasq='http://libvirt.org/schemas/network/dnsmasq/1.0'>
    ...
    <dnsmasq:options>
      <dnsmasq:option value="foo=bar"/>
      <dnsmasq:option value="cname=*.foo.example.com,master.example.com"/>
    </dnsmasq:options>
  </network>

To dnsmasq config options

  ...
  foo=bar
  cname=*.foo.example.com,master.example.com

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-07-17 17:18:56 -04:00
Michal Privoznik
cc34260f5a test: Introduce virnetdevopenvswitchtest
Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-16 13:42:39 +02:00
Peter Krempa
d0924f8c80 tests: Drop sexpr2xmltest
Now that we no longer support sexpr conversion to the internal config we
can drop the test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-09 10:27:19 +02:00
Peter Krempa
b8551d449c tests: Remove xml2sexprtest
The test was the only place calling 'xenFormatSxpr'. Drop it as there
are no other users of that code since we've dropped xend support in
commit 1dac5fbbbb.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-09 10:27:19 +02:00
Eric Blake
4d91ad1c59 snapshot: Rename qemu domain snapshot test files
Make it obvious that the domainsnapshotxml2xml test is only run when
compiling in support for qemu.

Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-08 16:10:22 -05:00
Peter Krempa
7b604379ba tests: Drop qemuargv2xmltest
Now that we no longer use that functionality we can also drop the tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-06-20 12:15:05 +02:00
Daniel P. Berrangé
4b4a981d60 conf: introduce virNetworkPortDefPtr struct and XML support
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:19:54 +01:00
Andrea Bolognani
73cfc36211 tests: Include LDADDS in qemu_LDADDS
At this point, all test programs that use qemu_LDADDS also
use LDADDS, so we can remove a bunch of repetition by simply
including the latter in the former.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:31:23 +02:00
Andrea Bolognani
6b8048b48d tests: Tweak vircapstest_LDADD
We optionally include QEMU and LXC support in this test and
depending on which is enabled (if either is enabled at all) we
need to link in different objects.

Right now we implicitly depend on the fact that qemu_LDADDS is
empty when QEMU is not enabled to get the correct set of objects,
but it's better to be explicit about it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:31:18 +02:00
Andrea Bolognani
74d8909f76 tests: Tweak cputest_LDADDS
We want all test programs using qemu_LDADDS to also use LDADDS,
and cputest is the only existing exception.

We can't just replace GNULIB_LIBS with LDADDS though, even though
the latter is a superset of the former, because that would result
in a linking error due to including the same object twice:

  /usr/bin/ld:
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  multiple definition of `libvirt_object_new_semaphore';
  ../src/libvirt_probes.o:.../src/libvirt_probes.o.dtrace-temp.c:141:
  first defined here

To work around this, we include both qemu_LDADDS and LDADDS when
QEMU support is enabled, and just LDADDS otherwise.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-06-12 20:30:46 +02:00
Jiri Denemark
02c1d3a6e1 qemuargv2xmltest: Use mocked virQEMUCapsProbeHostCPU
The qemuTestParseCapabilitiesArch call would eventually lead to the host
CPU being probed via virCPUGetHost. Let's divert this to a mocked
version already used by the qemuxml2argvtest.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2019-06-03 18:07:16 +02:00
Jim Fehlig
76b420d003 build: fix linking libqemutestdriver with LTO enabled
openSUSE Factory is in the process of enabling Link Time Optimization [0]
and stumbled upon missing symbols when linking libqemutestdriver

libtool: link: gcc -shared  -fPIC -DPIC  ../src/libvirt_qemu_probes.o  \
-Wl,--whole-archive ../src/.libs/libvirt_driver_qemu_impl.a \
../src/.libs/libvirt_driver_network_impl.a \
../src/.libs/libvirt_driver_storage_impl.a -Wl,--no-whole-archive  \
-lcap-ng -lgnutls -lnl-route-3 -lnl-3 -ldbus-1 -lselinux -lapparmor \
/usr/lib/libxml2.so -ldl -lz -llzma -lm -lblkid -ltirpc  \
-fstack-protector-strong -O2 -fstack-protector-strong -flto=16 -g -O2 \
-fstack-protector-strong -flto=16 -g \
-Wl,-soname -Wl,libqemutestdriver.so -o .libs/libqemutestdriver.so
...
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `mdir_name'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `rpl_ioctl'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `rpl_pipe2'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `recvfd'
/usr/lib/gcc/i586-suse-linux/9/../../../../i586-suse-linux/bin/ld: ./.libs/libqemutestdriver.so: undefined reference to `c_strcasecmp'

The missing symbols are provided by GNUlib. Add it when linking
libqemutestdriver.

[0] https://en.opensuse.org/openSUSE:LTO

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-05-30 09:09:10 -06:00
Michal Privoznik
5b9819eedc domain capabilities: Expose firmware auto selection feature
If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.

This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:

  <enum name='firmware'>
    <value>bios</value>
    <value>efi</value>
  </enum>

We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2019-04-10 13:58:51 +02:00
Daniel P. Berrangé
21c03d4fe6 tests: fix typo in mock filename added to EXTRA_DIST
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-03 12:01:56 +01:00
Daniel P. Berrangé
ff376c6283 tests: fix mocking of stat() / lstat() functions
Quite a few of the tests have a need to mock the stat() / lstat()
functions and they are taking somewhat different & inconsistent
approaches none of which are actually fully correct. This is shown
by fact that 'make check' fails on 32-bit hosts. Investigation
revealed that the code was calling into the native C library impl,
not getting intercepted by our mocks.

The POSIX stat() function might resolve to any number of different
symbols in the C library.

The may be an additional stat64() function exposed by the headers
too.

On 64-bit hosts the stat & stat64 functions are identical, always
refering to the 64-bit ABI.

On 32-bit hosts they refer to the 32-bit & 64-bit ABIs respectively.

Libvirt uses _FILE_OFFSET_BITS=64 on 32-bit hosts, which causes the
C library to transparently rewrite stat() calls to be stat64() calls.
Libvirt will never see the 32-bit ABI from the traditional stat()
call. We cannot assume this rewriting is done using a macro. It might
be, but on GLibC it is done with a magic __asm__ statement to apply
the rewrite at link time instead of at preprocessing.

In GLibC there may be two additional functions exposed by the headers,
__xstat() and __xstat64(). When these exist, stat() and stat64() are
transparently rewritten to call __xstat() and __xstat64() respectively.
The former symbols will not actally exist in the library at all, only
the header. The leading "__" indicates the symbols are a private impl
detail of the C library that applications should not care about.
Unfortunately, because we are trying to mock replace the C library,
we need to know about this internal impl detail.

With all this in mind the list of functions we have to mock will depend
on several factors

 - If _FILE_OFFSET_BITS is set, then we are on a 32-bit host, and we
   only need to mock stat64 and __xstat64. The other stat / __xstat
   functions exist, but we'll never call them so they can be ignored
   for mocking.

 - If _FILE_OFFSET_BITS is not set, then we are on a 64-bit host and
   we should mock stat, stat64, __xstat & __xstat64. Either may be
   called by app code.

 - If __xstat & __xstat64 exist, then stat & stat64 will not exist
   as symbols in the library, so the latter should not be mocked.

The same all applies to lstat()

These rules are complex enough that we don't want to duplicate them
across every mock file, so this centralizes all the logic in a helper
file virmockstathelper.c that should be #included when needed. The
code merely need to provide a filename rewriting callback called
virMockStatRedirect(). Optionally VIR_MOCK_STAT_HOOK can be defined
as a macro if further processing is needed inline.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-03 11:31:38 +01:00
Eric Blake
280a2b41e6 snapshot: Add tests of virsh -c test:///default snapshot*
Had this been in place earlier, I would have avoided the bugs in
commit 0baf6945 and 55c2ab3e. Writing the test required me to extend
the power of virsh - creating enough snapshots to cause fanout
requires enough input in a single session that adding comments and
markers makes it easier to check that output is correct. It's still a
bit odd that with test:///default, reverting to a snapshot changes the
domain from running to paused (possibly a bug in how the test driver
copied from the qemu driver) - but the important part is that the test
is reproducible, and any future tweaks we make to snapshot code have
less chance of breaking successful command sequences.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 09:24:53 -05:00
Cole Robinson
f38d553e2d configure: Remove --enable-test-coverage
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.

This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html

Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-14 20:47:15 -04:00
Andrea Bolognani
ca1471622d Don't define abs_* variables ourselves
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:32 +01:00
Andrea Bolognani
349d49637c tests: Don't redefine variables for TESTS_ENVIRONMENT
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:30 +01:00
Andrea Bolognani
c0a4a98eab Fix names for abs_top_{src,build}dir variables
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.

[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:28 +01:00
Andrea Bolognani
625c78b5c1 tests: Don't define TEST_DRIVER_DIR
It's no longer used anywhere.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:23 +01:00
Andrea Bolognani
b635eb8575 tests: Drop LIBVIRT_DRIVER_DIR from TESTS_ENVIRONMENT
LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e206322, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:19 +01:00
Andrea Bolognani
d24bb02b8c tests: Drop CONFIG_HEADER from TESTS_ENVIRONMENT
It's no longer used as of commit a9694a8e18.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2019-03-14 10:05:13 +01:00
Andrea Bolognani
6000bd1342 tests: Add testutilsqemu dependency for qemucaps2xmltest
We're not using any of the functionality offered by the
module at the moment, but we will in just a second.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-03-13 11:07:07 +01:00
Michal Privoznik
68ade25372 qemu: Enable firmware autoselection
https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 16:09:55 +01:00