Some migration capabilities are always enabled if QEMU supports them. We
can just drop the explicit code for them and let
qemuMigrationParamsCheck automatically set such capabilities.
QEMU_MONITOR_MIGRATION_CAPS_EVENTS would normally be one of the always
on features, but it is the only feature we want to enable even for other
jobs which internally use migration (such as save and snapshot). Hence
this capability is set very early after libvirtd connects to QEMU
monitor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's just a tiny wrapper around qemuMigrationParamsSetCapability and
setting priv->job.postcopyEnabled is not something qemuMigrationParams
code should be doing anyway so let the callers do it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every migration entry point in qemu_driver is supposed to call
qemuMigrationParamsFromFlags to transform flags and parameters into
qemuMigrationParams structure and pass the result to qemuMigration*
APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters and capabilities are supposed to be set on
both sides of migration while others should only be set on one side. For
example, CPU throttling parameters make no sense on the destination and
they can be used even if the destination is too old to support them.
To make qemuMigrationParamsFromFlags more general and usable on both
sides of migration, we need to tell it what side it's been called on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of checking each capability at the time we want to set it in
qemuMigrationParamsSetCapability we can check all of them at once in
qemuMigrationParamsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We reached the point when qemuMigrationParamsApply is the only API which
sends migration parameters and capabilities to QEMU. Thus all but the
TLS parameters can be set before we ask QEMU for the current values of
all parameters in qemuMigrationParamsCheck.
Supported migration capabilities are queried as soon as libvirt connects
to QEMU monitor so we can check them anytime.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefer xbzrle-cache-size migration parameter over the special
migrate-set-cache-size QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally QEMU provided query-migrate-cache-size and
migrate-set-cache-size QMP commands for querying/setting XBZRLE cache
size. In version 2.11 QEMU added support for XBZRLE cache size to the
general migration paramaters commands.
This patch adds support for this parameter to libvirt to make sure it is
properly restored to its original value after a failed or aborted
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework all remaining callers of qemuMonitorSetMigrationCapability to use
the new qemuMonitorSetMigrationCapabilities API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration capabilities are closely related to migration parameters and
it makes sense to keep them in a single data structure. Similarly to
migration parameters the capabilities are all send to QEMU at once in
qemuMigrationParamsApply, all other APIs operate on the
qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our current monitor API forces the caller to call
migrate-set-capabilities QMP command for each capability separately,
which is quite suboptimal. Let's add a new API for setting all
capabilities at once.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All users of migration parameters are supposed to use APIs provided by
qemu_migration_params.c without having to worry about the internals.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new name is qemuMigrationParamsApply and it will soon become the
only API which will send all requested migration parameters and
capabilities to QEMU. All other qemuMigrationParams* APIs will just
operate on the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no real reason for qemuMigrationParamsEnableTLS to require the
callers to pass a valid virQEMUDriverConfigPtr, it can just call
virQEMUDriverGetConfig.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether QEMU supports TLS migration and stores the
original value of tls-creds parameter to priv->migTLSAlias. This is no
longer needed because we already have the original value stored in
priv->migParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code can be merged directly in qemuMigrationParamsAddTLSObjects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restore the original values of all migration parameters we store in
qemuDomainJobObj instead of explicitly resting only a limited set of
them.
The result is not strictly equivalent to the previous code wrt reseting
TLS state because the previous code would only reset it if we changed it
before while the new code will reset it always if QEMU supports TLS
migration. This is not a problem for the parameters themselves, but it
can cause spurious errors about missing TLS objects being logged at the
end of non-TLS migration. This issue will be fixed ~50 patches later.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, only job->phase is passed and both APIs will need to look at
more details about the job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any job which touches migration parameters will first store their
original values (i.e., QEMU defaults) to qemuDomainJobObj to make it
easier to reset them back once the job finishes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connection to the client which controls a non-p2p migration gets
closed between Perform and Confirm phase, we don't know whether the
domain was successfully migrated or not. Thus, we have to leave the
domain paused and just cleanup the migration job and reset migration
parameters.
Previously we didn't reset the parameters and future save or snapshot
operations would see wrong environment (and could fail because of it) in
case the domain stayed running on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It provides just another view on some migration parameters so let's move
it close to them. The end goal is to merge compression parameters with
the rest of migration parameters since it doesn't make any sense to
handle them differently.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used since we do not store the struct on a stack anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our *Free functions usually do not take a double pointer and the caller
has to make sure it doesn't use the stale pointer after the *Free
function returns.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is connected with the code which handles migration
parameters and capabilities, let's move it to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function is tightly connected to migration, it was renamed as
qemuMigrationCapsCheck and moved to qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Future commits rely on the presence of this callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a function is disposing virSomething it should be called
virSomethingDispose(). There are two offenders:
virCapabilitiesDispose(virCapsPtr) and
virDomainXMLOptionClassDispose(virDomainXMLOptionPtr).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduced in d3db304d2e. Instead of returning immediately we
need to jump onto cleanup label where @paths is freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
