Since libvirt 1.3.4, any RNG source is accepted for the 'random'
backend. However, '/dev/urandom' is the _recommended_ source of
entropy. Therefore we should mention that in the docs.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a thread is unable to start a job (e.g. because of timeout)
a warning is printed into the logs. So far, the message does not
contain agent job info. Add it as it might help future debugging.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As qemuMonitorJSONIOProcess will call qemuMonitorJSONIOProcessEvent
which unlocks the monitor mutex, there is some extreme situation,
eg qemu send message to monitor twice in a short time, where the
local viriable 'msg' of qemuMonitorIOProcess could be a wild point:
1. qemuMonitorSend() assign mon->msg to parameter 'msg', which is alse a
local variable of its caller qemuMonitorJSONCommandWithFd(), cause
eventloop to send message to monitor, then wait condition.
2. qemu send message to monitor for the first time immediately.
3. qemuMonitorIOProcess() is called, then wake up the qemuMonitorSend()
thread, but the qemuMonitorSend() thread stuck for a while as cpu pressure
or some other reasons, which means the qemu monitor is still unlocked.
4. qemu send event message to monitor for the second time,
such as RTC_CHANGE event
5. qemuMonitorIOProcess() is called again, the local viriable 'msg' is
assigned to mon->msg.
6. qemuMonitorIOProcess() call qemuMonitorJSONIOProcess() to deal with
the qemu event.
7. qemuMonitorJSONIOProcess() unlock the qemu monitor in the macro
'QEMU_MONITOR_CALLBACK', then qemuMonitorSend() thread get the mutex
and free the mon->msg, assign mon->msg to NULL.
Signed-off-by: Weilun Zhu <zhuweilun@huawei.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch introduces --all to show all block devices info
of guests like:
virsh # domblkinfo w08 --all
Target Capacity Allocation Physical
---------------------------------------------------
hda 42949672960 9878110208 9878110208
vda 10737418240 10736439296 10737418240
Target Capacity Allocation Physical
---------------------------------------------------
hda 40.000 GiB 9.200 GiB 9.200 GiB
vda 10.000 GiB 9.999 GiB 10.000 GiB
For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a regression in behavior caused by commit 37359814. It was
intended to limit the schema to allow only a single subelement of
<rule>, but it is also acceptable for <rule> to have no subelement at
all.
To prevent the same error from reoccurring in the future, the
examples/xml/nwfilter directory was added to the list of nwfilter
schema test directories.
Resolves: https://bugzilla.redhat.com/1593549
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Re-generating of generated source files in the hyperv directory
depends on src/.hyperv_wmi_generator.stamp not existing, or having a
timestamp older than src/hyperv/hyperv_wmi_generator.py. "make
maintainer-clean" erases the generated files, but not this sentinel
file, so the erased files aren't regenerated during the next
make. Once we add it to the list of MAINTAINERCLEANFILES, it gets
deleted at the same time as the generated files, so make is able to
understand they need regeneration.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The problem has been around for quite awhile - the misspelling was
faithfully copied from src/Makefile.am to src/hyperv/Makefile.am.inc
in commit 253b528c.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591628
Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:
error: internal error: unexpected async job 6 type expected 0
So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Make it clearer what asyncJob type was passed and what was expected.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The last usages were removed with the xend driver in 1dac5fbbbb
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.
For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have agent job we can grab it while freezing/thawing
guest file system before/after doing snapshot.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The point is to break QEMU_JOB_* into smaller pieces which
enables us to achieve higher throughput. For instance, if there
are two threads, one is trying to query something on qemu
monitor while the other is trying to query something on agent
monitor these two threads would serialize. There is not much
reason for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce guest agent specific job categories to allow threads to
run agent monitor specific jobs while normal monitor jobs can
also be running.
Alter _qemuDomainJobObj in order to duplicate certain fields that
will be used for guest agent specific tasks to increase
concurrency and throughput and reduce serialization.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Be more consistent and use 'preparing' instead of 'prepare' here.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When commit 6718132d enforced usage of the cleanup label, it forgot to
set the @ret variable to 0 on "success" exit path.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If measurement retrieval fails we'd forget to call ExitMonitor to unlock
the monitor.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reported-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since it's being called with QEMU_ASYNC_JOB_NONE which is what
qemuDomainObjEnterMonitor is going to use with the internal helper,
let's use that one instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Since e6be524508 we include the executed command along
with the reply in *.replies files, which breaks the
renumbering logic implemented in qemucapsfixreplies.
Adapt the script so that it works with the new format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The aim of this API is to allow the caller to do best effort.
Some functions can work even when acquiring the job fails (e.g.
qemuConnectGetAllDomainStats()). But what they can't bear is
delay if they have to wait up to 30 seconds for each domain that
is processing some other job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The variable is initialized to -1 already. There's no way it can
be overwritten by the time control gets to the line I'm removing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Provide a small comment on the function and its parameters.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Fix the return value status comparison checking for call to
virJSONValueObjectCreateVArgs introduced by commit id f0a23c0c3.
If a NULL arglist is passed, then a 0 is returned which is a
valid status and we only should fail when the return is < 0.
This resolves an issue seen for "virsh iothreadadd $dom $iothread"
where a "error: An error occurred, but the cause is unknown" error
was generated when trying to hotplug an IOThread to a domain since
qemuDomainHotplugAddIOThread passes a NULL arglist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit aad3a0b5f altered virObjectEventStateQueueRemote to move
the "if (!event) return" call added in the previous commit 031eb8f6
to virObjectEventStateQueue. Neither commit altered the function
prototype which used ATTRIBUTE_NONNULL(2).
This caused Coverity build problems. Since @event is now checked,
just remove the ATTRIBUTE_NONNULL check from both prototypes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591561
For reasons I don't understand my original patch of 75f0fd5112
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We build on Fedora Rawhide, same as on the CentOS CI
environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we use pre-built Docker images, it's very easy
to extend our test matrix; adding CentOS 7 is a good start.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of starting from the minimal Ubuntu 18.04 base
image and installing all requirements at build time,
use a Docker image that has been specifically tailored
at building libvirt and thus already includes all
required packages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
