Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new parameter group returns information about network interfaces
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)
Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH
The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.
This will serve for future reference once we'll be able to properly
refuse to suggest anything.
The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.
We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.
We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By doing so we can get rid of the code which violates our coding style
guidelines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Rename the temp variable that is being returned and use automatic
pointer clearing for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In case the specific VCPU states are not present in the XML we were
taking a fallback code path just noting that all cpus of the VM are
enabled.
This was broken by a mistake in a recent refactor where a 'goto cleanup'
was mistakenly replaced by a 'return NULL'. This broke reporting of cpus
and also caused a memory leak.
Return the fallback cpu map.
Fixes: bd1f40fe7d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004429
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.
Reduce their scope and free them automatically.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we dropped virDomainSetMemory usage it got kind of tricky to
figure out the flags correctly.
Originally the logic was following:
no option | --current | --live | --config | --live --config
----------+-----------+--------+----------+----------------
LIVE | CURRENT | LIVE | CONFIG | LIVE & CONFIG
But after the commit removing virDomainSetMemory usage it changed to:
no option | --current | --live | --config | --live --config
----------+-----------+--------+-----------------+----------------
LIVE | CURRENT | LIVE | LIVE & CONFIG | LIVE & CONFIG
This commit fixes the logic back to the original behavior except for
ESX, HyperV and Virtuozzo drivers where virDomainSetMemory() default
behavior was CURRENT instead of LIVE.
Fixes: ce8138564b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980199
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to definition of virDomainCoreDumpFormat, the "elf" should be
the first argument in VIR_ENUM_*.
Fixes: 84cc4543be
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1981625
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.
However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).
Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These functions initialize @ret to true and only after something
fails either they call cleanup code (which consists only from
virshDomainFree()) and return false, or they set ret = false and
carry on (when the failure occurred close to cleanup code).
Switch them to the usual pattern in which ret is initialized to
failure, goto cleanup is used and ret is set to true only after
everything succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my commit of v7.1.0-rc1~376 I've simplified the logic of
handling @flags. My assumption back then was that calling
virDomainSetMemory() is equivalent to
virDomainSetMemoryFlags(flags = 0). But that is not the case,
because it is equivalent to virDomainSetMemoryFlags(flags =
VIR_DOMAIN_AFFECT_LIVE). Fix the condition that calls the old
API.
Fixes: b5e267e8c5
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961118
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_auto for the string list and remove 'ret' and 'cleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Use g_auto* pointers to avoid the need of a cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This completer offers completion for --codeset argument of
send-key command.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pthread_sigmask() returns 0 on success and "a non-zero value
on failure", but not neccessarily a negative one.
Found by clang-tidy's "bugprone-posix-return" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
What code tries to achieve is that if no flags were provided to
either 'setmem' or 'setmaxmem' commands then the old (no flags)
API is called to be able to communicate with older daemons.
Well, the code can be simplified a bit.
Note that with this change the old no flag version of APIs is
used more often. Previously if --current argument was given it
resulted in *Flags() version to be called even though it is not
necessary - VIR_DOMAIN_AFFECT_CURRENT is implied.
Therefore, this change in fact allows virsh to talk with broader
set of daemons. No other user visible changes were made.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Domain name can contain spaces in which case it's not immediately clear
from virsh messages where the boundary of the name is. Enclose all %s
formatters in apostrophes as delimiters.
Done via the following vim regex:
%s/omain %s/omain '%s'/g
This patch changes:
$ virsh undefine --snapshots-metadata 'OWASP Broken Web Apps VM v1.2'
Domain OWASP Broken Web Apps VM v1.2 has been undefined
to:
$ virsh undefine --snapshots-metadata 'OWASP Broken Web Apps VM v1.2'
Domain 'OWASP Broken Web Apps VM v1.2' has been undefined
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The refactor left in the 'if (addr)' check,
but before 'addr' was the return value of strchr
and now it's the return value of virshAddressParse.
Check 'a' instead since that's the return of strchr now.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 67bf91e1c3
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When removing SSH keys via set-user-sshkeys virsh command, then
files to remove are read from passed file. But when
experimenting, I've passed /dev/null as the file which resulted
in API checks which caught that @keys argument of
virDomainAuthorizedSSHKeysSet() can't be NULL. This is because if
the file is empty then its content is an empty string and thus
the buffer the file was read in to is not NULL.
Long story short, error is reported correctly, but it's not
necessary to go through public API to catch it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.10.0-rc1~104 I've added a virsh command that exposes
virDomainAuthorizedSSHKeysSet() API under "set-user-sshkeys"
command. The command accepts mutually exclusive "--reset" and
"--remove" options (among others). While the former controls the
VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_APPEND flag, the latter
controls the VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_REMOVE flag.
These flags are also mutually exclusive. But the code that sets
them has a logical error which may result in both flags being
set. In fact, this results in user being not able to set just the
remove flag.
Fixes: 87d12effbe
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1904674
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Existing practice with the filesystem fields reported for the
virDomainGetGuestInfo API is to use the singular form for
field names. Ensure the disk info follows this practice.
Fixes
commit 05a75ca2ce
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:46 2020 +0400
domain: add disk informations to virDomainGetGuestInfo
commit 0cb2d9f05d
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:47 2020 +0400
qemu_driver: report guest disk informations
commit 172b830435
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:48 2020 +0400
virsh: add --disk informations to guestinfo command
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the code to the new XML formatting approach for simpler code and
future additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For extendability and clarity add enum virshAttachDiskSourceType and
use it to drive the XML formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The helper started as helper for cmdAttachDisk but is now used outside
of it too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'virshAddress' prefix for all the related structs and enums.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rewrite and rename the address parser.
As a fallout the use of the removed 'str2PCIAddress' is replaced by
virshAddressParse and virshAddressFormat.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DISK_ADDR_TYPE_SATA, DISK_ADDR_TYPE_IDE and DISK_ADDR_TYPE_SCSI are
driven by basically identical data types. Unify them. Note that
changes to 'str2DiskAddress' are deliberately lazy as it will be
refactored later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce virshAddressFormat with code from cmdAttachDiskFormatAddress
to format the address.
Note that this patch fixes some whitespace inconsistencies in the
formatted addresses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
First step is to remove all of the address handling code to a new
function called 'cmdAttachDiskFormatAddress'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'virsh attach-disk' uses stat() to determine if the 'source' is a
regular file. If stat fails though it assumes that the file is block.
Since it's way more common to have regular files and the detection does
not work at all when accessing a remote host, modify the default to
assume type='file' by default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the unnecessary 'cleanup:' label since we can directly return as
the memory clearing is now automated.
We can also remove the 'functionReturn' variable and use the usual
pattern of returning success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
