qemu removed the support for the old 'ivshmem' device in 4.0 release.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Keep things consistent by using the same file extension for the
generated NVRAM path as the NVRAM template.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Just like the more common split builds, these are of type
QEMU_FIRMWARE_DEVICE_FLASH; however, they have no associated
NVRAM template, so we can't access the corresponding structure
member unconditionally or we'll trigger a crash.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation states that, just like the Modern() variant,
this function should return 1 if a match wasn't found. It
currently doesn't do that, and returns 0 instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In mu previous commits I've moved internals of
qemuDomainChrDefDropDefaultPath() into a separate function
(qemuDomainChrMatchDefaultPath()) but forgot to remove @buf and
@regexp variables which are now unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If a user passes a list of disks to migrate but don't actually use
'VIR_MIGRATE_NON_SHARED_DISK' or 'VIR_MIGRATE_NON_SHARED_INC' flags the
parameter would be simply ignored without informing the user of the
error.
Add a proper error in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_MIGRATE_TUNNELLED is used without
VIR_MIGRATE_NON_SHARED_DISK/VIR_MIGRATE_NON_SHARED_INC
an error was reported without actually returning failure.
This was caused by a refactor which dropped many error paths.
Fixes: 6111b235224
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes
commit 38abf9c34dc481b0dc923bdab446ee623bdc5ab6
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 21 13:22:40 2023 +0100
src: set max open file limit to match systemd >= 240 defaults
The bug referenced in that commit had suggested to set
LimitNOFile=512000:1024
on the basis that matches current systemd default behaviour and is
compatible with old systemd. That was good except
* The setting is LimitNOFILE and these are case sensitive
* The hard and soft limits were inverted - soft must come
first and so it would have been ignored even if the
setting name was correct.
* The default hard limit is 524288 not 512000
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If one of previous commits taught us something, it's that:
sizeof(variable) and sizeof(type) are not the same. Especially
because for live enough code the type might change (e.g. as we
use autoptr more). And since we don't get any warnings when an
incorrect length is passed to memset() it is easy to mess up. But
with sizeof(variable) instead, it's not as easy. Therefore,
switch to using memset(variable, 0, sizeof(*variable)), or its
alternatives, depending on level of pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When a VSERPORT_CHANGE event is processed, we firstly do a little
detour and try to detect whether the event is coming from guest
agent. If so, we notify threads that are currently talking to the
agent about this fact. Then we proceed with usual event
processing (BeginJob(), update domain def, emit event, and so
on).
In both cases we use the same @dev variable to refer to domain
device. While this works, it will make writing semantic patch
unnecessary harder (see next commit(s)). Therefore, introduce a
separate variable for the detour code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When I implemented passt support in libvirt, I saw the --mac-addr
option on the passt commandline, immediately assumed that this was
used for setting the guest interface's mac address somewhere within
passt, and read no further. As a result, "--mac-addr" is always added
to the passt commandline, specifying the setting from <mac
addr='blah'/> in the guest's interface config.
But as pointed out in this bugzilla comment:
https://bugzilla.redhat.com/2184967#c8
That is *not at all* what passt's --mac-addr option does. Instead, it
is used to force the *remote* mac address for incoming traffic to a
specific value. So setting --mac-addr results in all traffic on the
interface having the same (the guest's) mac address for both source
and destination in all traffic. Surprisingly, this still works, so
nobody noticed it during testing.
The proper thing is to not specify any mac address to passt - the
remote MAC addresses can and should remain untouched, and the local
MAC address will end up being known to passt just by the guest sending
out packets with that MAC address.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
This reverts commit 8511b96a319836700b4829816cdae27c3630060d.
Turns out, we need to do a bit more than just plain
qemuSecurityDomainSetPathLabel() which sets svirt_image_t. Passt
has its own SELinux policy and as a part of that they invent
passt_log_t for log files. Right now, I don't know how libvirt
could query that and even if I did, passt SELinux policy would
need to permit relabelling from svirt_t to passt_log_t, which it
doesn't [1].
Until these problems are addressed we shouldn't be pre-creating
the file as it puts users into way worse position - even
scenarios that used to work don't work. But then again - using
log file for passt is usually valuable for developers only and
not regular users.
1: https://bugzilla.redhat.com/show_bug.cgi?id=2209191#c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 83686f1eea1a001a37a92f2c054ffb2689c43a40.
This is needed only so that the next revert is clean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When automatically adding a NUMA node (qemuDomainDefNumaAutoAdd()) the
memory size of the node is computed as:
total_memory - sum(memory devices)
And we have a nice helper for that: virDomainDefGetMemoryInitial() so
it looks logical to just call it. Except, this code runs in post parse
callback, i.e. memory sizes were not validated and it may happen that
the sum is greater than the total memory. This would be caught by
virDomainDefPostParseMemory() but that runs only after driver specific
callbacks (i.e. after qemuDomainDefNumaAutoAdd()) and because the
domain config was changed and memory was increased to this huge
number no error is caught.
So let's do what virDomainDefGetMemoryInitial() would do, but
with error checking.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Fixes: f5d4f5c8ee44e9f1939070afcc5381bdd5545e50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a per-domain SWTPM state directory exists but is empty our
code still considers it a valid state and skips running
'swtpm_setup' (handled in qemuTPMEmulatorRunSetup()).
While we should not try to inspect individual files created by
swtpm, we can still consider empty folder as non-existent state.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/320
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability code now probes the presence of commands from the QMP
schema instead of using 'query-commands'. Don't call the command and
adjust the '.replies' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the probing code to extract the data from the QMP schema rather
than invoking 'query-commands'. This patch doesn't yet remove the actual
invocation of 'query-commands', just moves the actual probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a IDE disk was added in qemu
commit 95ebda85e09 (v1.0-1869-g95ebda85e0) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a SCSI disk was added in qemu
commit 27395add759ff4caeb0 (v1.0-3326-g27395add75) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All backing chain members which were auto-added by image detection,
including the terminating element, should have the 'detected' property
set to true. This is needed to properly strip the detected elements in
some cases, e.g. for the status XML where we could treat some images as
manually terminated even when it was auto-detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrap argument definition of qemuDomainSaveInternal and align argument
in the invocation of the aforementioned function in
qemuDomainManagedSaveHelper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the previous commit we no longer require that logind is actually
running, it merely has to be activatable.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since systemd 240, all services get an open file hard limit of
500k, and a soft limit of 1024. This limit means apps are safe
to use select() by default which is limited to 1024 FDs. Apps
which don't use select() are expected to simply set their soft
limit to match the hard limit during startup.
With our current unit file settings we've been effectively
reducing the max open files we have on most modern systems.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All services are ordered after local-fs.target unless they have set
DefaultDependencies=no, which we do not do.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtio-gpu 'blob' support was insufficiently validated. Qemu
requires a memfd memory backing in order to use udmabuf and enable blob
support. Example error:
$ virsh start rhel9
error: Failed to start domain 'rhel9'
error: internal error: qemu unexpectedly closed the monitor: 2023-07-18T02:33:57.083178Z qemu-kvm: -device {"driver":"virtio-vga","id":"video0","max_outputs":1,"blob":true,"bus":"pcie.0","addr":"0x1"}: cannot enable blob resources without udmabuf
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, the way to set PC speaker for a guest was to pass:
-soundhw pcspk
but as of QEMU commit v5.1.0-rc0~28^2~3 this is deprecated and we
should use:
-machine pcspk-audiodev=$id
instead. The old way was then removed in commit v7.1.0-rc0~99^2~3.
Now, ideally we would have a capability selecting whether we talk
to a QEMU that understands the new way or not. But it's not that
simple - the machine attribute is just an alias to the .audiodev=
attribute of 'isa-pcspk' object and both are created in
pc_machine_initfn() function, i.e. not then the PC_MACHINE() class
is initialized, but when it's instantiated. IOW, it's not possible
for us to query whether we're dealing with older or newer QEMU.
But given that the newer version is supported since v5.1.0 and the
minimal version we require is v4.2.0 (i.e. there are two releases
which don't understand the newer cmd line) and how frequently this
feature is (un-)used (the issue was reported after ~1 year since it
stopped working), I believe we can live without any capability and
just use the newer cmd line unconditionally.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/490
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Now that the QEMU_CAPS_USB_STORAGE_REMOVABLE capability is no
longer used we can stop querying it and retire it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in QEMU commit of v0.14.0-rc0~83^2~1 and not being
able to compile the .removable attribute of the "usb-storage"
object out, renders our corresponding capability
QEMU_CAPS_USB_STORAGE_REMOVABLE always set. Stop using it in
command generation / domain validation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit be1b7d5b18 introduced parsing /proc/cpuinfo for "address size"
which is not including on S390 and therefore reports an internal error.
Lets remove the parsing on S390.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until v2.11.0-rc2~19^2~3 QEMU used to require at least one
NUMA node to be configured when memory hotplug was enabled. After
that commit, QEMU automatically adds a NUMA node if none was
specified on the cmd line. Reflect this in domain XML, i.e.
explicitly add a NUMA node into our domain definition if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a domain has NUMA configured, then all <memory/> devices
(except for 'virtio-pmem') need to have targetNode set. There are
two checks inside of qemuDomainDefValidateMemoryHotplugDevice()
for this: one inside of big switch() statement, which only checks
'dimm' and 'nvdimm' cases, and the other at the end of the
function that checks all models (except for 'virtio-pmem'). Let's
keep the latter and remove the former as the latter covers the
former too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU capability is looking in query-command-line-options response for
...
{
"parameters": [
{
"name": "async-teardown",
"type": "boolean"
}
],
"option": "run-with"
}
...
allow to use the QEMU option -run-with async-teardown=on|off
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If VIR_ASYNC_JOB_NONE flag is present, job.current is equal
to NULL, which leads to SIGSEGV. Thus, this check should be
moved up.
Fixes: v8.0.0-427-gf304de0df6
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've introduced @logfd variable
that was supposed to hold FD of passt logfile. But I've forgot to
assign the qemuDomainOpenFile() retval to it.
Fixes: 8511b96a319836700b4829816cdae27c3630060d
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
