Original current flag expansion does not filter out non
_CONFIG and _LIVE flags explicitly but they are prohibited
earlier by virCheckFlags.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Flag expansion is the same as in virDomainObjUpdateModificationImpact
which virDomainLiveConfigHelperMethod calls internally. The difference
is merely in implementation. Note that VIR_DOMAIN_MEM_CONFIG is the
same as VIR_DOMAIN_AFFECT_CONFIG. Additionally, the called functions
will properly use flag OR and thus handle the VIR_DOMAIN_MEM_MAXIMUM case.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.
In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.
It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the
use of `virsh domifstat <dom> <interface name>` command plus
seeing the interfaces names instead of "-" when doing
`virsh domiflist <dom>`.
After successful guest creation we fill the network
interfaces names based on domain, device id and append suffix
if it's emulated in the following form: vif<domid>.<devid>[-emu].
We extract the network interfaces info from the libxl_domain_config
object in libxlDomainCreateIfaceNames() to generate ifname. On domain
cleanup we also clear ifname, in case it was set by libvirt (i.e.
being prefixed with "vif"). We also skip these two steps in case the name
of the interface was manually inserted by the adminstrator.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the latter
is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.
To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
commit 4b53d0d4ac "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Commit 45697fe5 added dom0 to driver->domains, but missed
setting its state to 'running'
$ virsh list
Id Name State
----------------------------------------------------
0 Domain-0 shut off
Set the state of virDomainObj in the functions that
actually change the domain state, instead of the generic
libxlDomainCleanup function. This approach gives functions
calling libxlDomainCleanup more flexibility wrt when and
how they change virDomainObj state via virDomainObjSetState.
The prior approach of calling virDomainObjSetState in
libxlDomainCleanup resulted in the following incorrect
coding pattern in the various functions that change
domain state
libxlDomain<DoStateTransition>
call libxl function to do state transition
emit lifecycle event
libxlDomainCleanup
virDomainObjSetState
Once simple manifestation of this bug is seeing a domain
running in virt-manager after selecting the shutdown button,
even after the domain has long shutdown.
In Xen, dom0 is really just another domain that supports ballooning,
adding/removing devices, changing vcpu configuration, etc. This patch
adds support to the libxl driver for managing dom0. Note that the
legacy xend driver has long supported managing dom0.
Operations that are not supported on dom0 are filtered in libvirt
where a sensible error is reported. Errors from libxl are not
always helpful. E.g., attempting a save on dom0 results in
2015-06-23 15:25:05 MDT libxl: debug: libxl_dom.c:1570:libxl__toolstack_save: domain=0 toolstack data size=8
2015-06-23 15:25:05 MDT libxl: debug: libxl.c:979:do_libxl_domain_suspend: ao 0x7f7e68000b70: inprogress: poller=0x7f7e68000930, flags=i
2015-06-23 15:25:05 MDT libxl-save-helper: debug: starting save: Success
2015-06-23 15:25:05 MDT xc: detail: xc_domain_save_suse: starting save of domid 0
2015-06-23 15:25:05 MDT xc: error: Couldn't map live_shinfo (3 = No such process): Internal error
2015-06-23 15:25:05 MDT xc: detail: Save exit of domid 0 with errno=3
2015-06-23 15:25:05 MDT libxl-save-helper: debug: complete r=1: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:1876:libxl__xc_domain_save_done: saving domain: domain did not respond to suspend request: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:2033:remus_teardown_done: Remus: failed to teardown device for guest with domid 0, rc -8
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
def->vcpus was never updated after successfully changing the live
vcpu count of a domain. Subsequent queries for vcpu info would
return incorrect results. E.g.:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
virsh setvcpus test 2
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
After patch, live current config is reported correctly:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 2
While fixing this, noticed that the live config was not saved
to cfg->stateDir via virDomainSaveStatus. Save the live config
and change error handling of virDomainSave{Config,Status} to
log a message via VIR_WARN, instead of failing the entire
DomainSetVcpusFlags operation.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver always uses virDomainObj->def when formatting
the domain XML description. Use virDomainObj->newDef when
--inactive flag is set.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainCreateXML() would remove a persistent domain if
libxlDomainStart() failed. Check if domain is persistent
before removing.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When restarting libvirtd and reconnecting to running domains,
libxlReconnectDomain() would unconditionally set the domain state
to VIR_DOMAIN_RUNNING, overwriting the state maintained in
$statedir/<domname>.xml. A domain in a paused state would have
the state changed to running, even though it was actually in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
The libxl tries to check if it's running in dom0 by parsing
/proc/xen/capabilities and if that fails it doesn't load.
There's no procfs interface in Xen on FreeBSD, so this check always
fails.
In addition to checking procfs, check if /dev/xen/xenstored, that's enough to
check if we're running in dom0 in FreeBSD case.
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Currently, the libxl driver does not support any security drivers.
When the qemu driver has no security driver configued,
nodeGetSecurityModel succeeds but returns an empty virSecurityModel
object. Do the same in the libxl driver instead of reporting
this function is not supported by the connection driver:
virNodeGetSecurityModel
Rearrange code so that the local variable is always initialized and
disposed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
A destroy operation can take considerable time on large memory
domains due to scrubbing the domain's memory. Unlock the
virDomainObj while libxl_domain_destroy is executing.
Implement libxlDomainDestroyInternal wrapper to handle unlocking,
calling destroy, and locking. Change all callers of
libxl_domain_destroy to use the wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A job should be acquired at the beginning of a domain destroy operation,
not at the end when cleaning up the domain. Fix two occurrences of this
late job acquisition in the libxl driver. Doing so renders
libxlDomainCleanupJob unused, so it is removed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Let callers of libxlDomainStart decide when it is appropriate to
acquire a job on the associated virDomainObj.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Although needed in the Xen 4.1 libxl days, there is no longer any
benefit to having per-domain libxl_ctx. On the contrary, their use
makes the code unecessarily complicated and prone to deadlocks under
load. As suggested by the libxl maintainers, use a single libxl_ctx
as a handle to libxl instead of per-domain ctx's.
One downside to using a single libxl_ctx is there are no longer
per-domain log files for log messages emitted by libxl. Messages
for all domains will be sent to /var/log/libvirt/libxl/libxl-driver.log.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function now only enables domain death events. Simply call
libxl_evenable_domain_death() instead of an unnecessary wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Informing libxl how to handle its child proceses should be done once
during driver initialization, not once for each domain-specific
libxl_ctx object. The related libxl documentation in
$xen-src/tools/libxl/libxl_event.h even mentions that "it is best to
call this at initialisation".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Long ago I incorrectly associated libxl fd and timer registrations
with per-domain libxl_ctx objects. When creating a libxlDomainObjPrivate,
a libxl_ctx is allocated, and libxl_osevent_register_hooks is called
passing a pointer to the libxlDomainObjPrivate. When an fd or timer
registration occurred, the registration callback received the
libxlDomainObjPrivate, containing the per-domain libxl_ctx. This
libxl_ctx was then used when informing libxl about fd events or
timer expirations.
The problem with this approach is that fd and timer registrations do not
share the same lifespan as libxlDomainObjPrivate, and hence the per-domain
libxl_ctx ojects. The result is races between per-domain libxl_ctx's being
destoryed and events firing on associated fds/timers, typically manifesting
as an assert in libxl
libxl_internal.h:2788: libxl__ctx_unlock: Assertion `!r' failed
There is no need to associate libxlDomainObjPrivate objects with libxl's
desire to use libvirt's event loop. Instead, the driver-wide libxl_ctx can
be used for the fd and timer registrations.
This patch moves the fd and timer handling code away from the
domain-specific code in libxl_domain.c into libxl_driver.c. While at it,
function names were changed a bit to better describe their purpose.
The unnecessary locking was also removed since the code simply provides a
wrapper over the event loop interface. Indeed the locks may have been
causing some deadlocks when repeatedly creating/destroying muliple domains.
There have also been rumors about such deadlocks during parallel OpenStack
Tempest runs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error. E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed". Remove the
redundant (and useless) error reporting in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
It will not be possible to detach such device later. Also improve
logging in such cases.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation. When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags. Remove this unneeded (and incorrect) code.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The path to the pty of a Xen PV console is set only in
virDomainOpenConsole. But this is done too late. A call to
virDomainGetXMLDesc done before OpenConsole will not have the path to
the pty, but a call after OpenConsole will.
e.g. of the current issue.
Starting a domain with '<console type="pty"/>'
Then:
virDomainGetXMLDesc():
<devices>
<console type='pty'>
<target type='xen' port='0'/>
</console>
</devices>
virDomainOpenConsole()
virDomainGetXMLDesc():
<devices>
<console type='pty' tty='/dev/pts/30'>
<source path='/dev/pts/30'/>
<target type='xen' port='0'/>
</console>
</devices>
The patch intend to have the TTY path on the first call of GetXMLDesc.
This is done by setting up the path at domain start up instead of in
OpenConsole.
https://bugzilla.redhat.com/show_bug.cgi?id=1170743
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch contains three domain cleanup improvements in the migration
finish phase, ensuring a domain is properly disposed when a failure is
detected or the migration is cancelled.
The check for virDomainObjIsActive is moved to libxlDomainMigrationFinish,
where cleanup can occur if migration failed and the domain is inactive.
The 'cleanup' label was missplaced in libxlDomainMigrationFinish, causing
a migrated domain to remain in the event of an error or cancelled migration.
In cleanup, the domain was not removed from the driver's list of domains.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Moving data reception of the perform phase of migration to a
thread introduces a race with the finish phase, where checking
if the domain is active races with the thread finishing the
perform phase. The race is easily solved by acquiring a job in
the finish phase, which must wait for the perform phase job to
complete.
While wrapping the finish phase in a job, noticed the virDomainObj
was being unlocked in a callee - libxlDomainMigrationFinish. Move
the unlocking to libxlDomainMigrateFinish3Params, where the lock
is acquired.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
There is no need to acquire the driver-wide lock in
libxlDomainDefineXML. When switching to jobs in the libxl
driver, most driver-wide locks were removed. The locking here
was preserved since I mistakenly thought virDomainObjListAdd
needed protection. This is not the case, so remove the
unnecessary locking.
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Code logic in libxlDomainAttachDeviceFlags and libxlDomainDetachDeviceFlags
is wrong with return value in error cases.
'ret' was being set to 0 if 'flags & VIR_DOMAIN_DEVICE_MODIFY_CONFIG' was
false. Then if something like virDomainDeviceDefParse() failed in the
VIR_DOMAIN_DEVICE_MODIFY_LIVE logic, the error would be reported but the
function would return success.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
During migration, the libxl driver starts a modify job in the
begin phase, ending the job in the confirm phase. This is
essentially VIR_MIGRATE_CHANGE_PROTECTION semantics, but the
driver does not support that flag. Without CHANGE_PROTECTION
support, the job would never be terminated in error conditions
where migrate confirm phase is not executed. Further attempts
to modify the domain would result in failure to acquire a job
after LIBXL_JOB_WAIT_TIME.
Similar to the qemu driver, end the job in the begin phase.
Protecting the domain object across all phases of migration can
be done in a future patch adding CHANGE_PROTECTION support.
In libxlDomainMigrationPrepare(), a new virDomainObj is created
from the incoming domain def and added to the driver's domain
list, but never removed if there are subsequent failures during
the prepare phase.
targethost# virsh list --all
sourcehost# virsh migrate --live dom xen+ssh://targethost/system
error: operation failed: Fail to create socket for incoming migration.
targethost# virsh list --all
error: Failed to list domains
error: name in virGetDomain must not be NULL
After adding code to remove the domain on prepare failure, noticed
that libvirtd crashed due to double free of the virDomainDef. Similar
to the qemu driver, pass a pointer to virDomainDefPtr so it can be set
to NULL once a virDomainObj is created from it.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
