We need to pass some flags in order to properly initialize the
connection otherwise it will not work. This copies what GLib does
for g_bus_get_sync() internally.
This fixes an issue with LXC driver where libvirt was not able to
register any VM with machined.
Reported-by: Matthias Maier <tamiko@gentoo.org>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Verify that the checkpoint requested by an incremental backup exists.
Unfortunately validating whether the checkpoint configuration actually
matches the disk may not be reasonably feasible as the disk may have
been renamed/snapshotted/etc. We still rely on bitmap presence.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate that the bitmaps are present when redefining a checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
First one prepares and validates the definition, the second one actually
either updates an existing checkpoint or assigns definition for the new
one.
This will allow driver code to add extra validation between those
steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a flag which will allow users to perform hypervisor-specific
validation when redefining the checkpoint metadata. This will allow
checking metadata which is stored e.g. in disk images when populating
the libvirt metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we don't have a consistent chain of bitmaps for the backup to proceed
we'd report VIR_ERR_INVALID_ARG error code, which makes it hard to
decide whether an incremental backup makes even sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu implementation requires that the VM associated with the
checkpoint is running when checking the size. Mention this possibility
with the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was basically open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testing code we don't properly populate the job sometimes. If it
isn't populated we should not touch it though in the migration cookie
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu_migration_cookie' module uses these. Provide a stable override
for tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include qemu_domain.h and qemu_domainjob.h as the types from those
headers are used by this header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virGDBusBusInit is supposed to return a reference to
requested bus type (system/session) or, if non-shared bus is
requested then create a new bus of the type. As an argument, it
gets a double pointer to GError which is passed to all g_dbus_*()
calls which allocate it on failure. Pretty standard approach.
However, since it is a double pointer we must dereference the
first level to see if the value is NULL. IOW:
if (*error)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcCleanup uses qemuDomainObjDiscardAsyncJob currently. But
discard does not reduce jobs_queued counter so it leaks. Also discard does not
notify other threads that job condition is available. Discard does reset nested
job but nested job is not possible in this conditions.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The only caller of this function ignores failure
and just sets the unique_id to -1.
Failing to read the file is likely to the device no longer
being present, not a real error.
Stop reporting errors in this function.
https://bugzilla.redhat.com/show_bug.cgi?id=1692100
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For functions which have reasonable replacement, let's encourage usage
of g_hash_table_ alternatives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Glib's hash table provides basically the same functionality as our hash
table.
In most cases the only thing that remains in the virHash* wrappers is
NULL-checks of '@table' argument as glib's hash functions don't tolerate
NULL.
In case of iterators, we adapt the existing API of iterators to glibs to
prevent having rewrite all callers at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
We didn't use it rigorously and some helpers even cast it away. Remove
const from all hash utility functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Convert all calls to virHashForEach where it's not obvious that the
callback is _not_ deleting the current element from the hash to
virHashForEachSafe which will be deemed safe to do such operation.
Now that no iterator used with virHashForEach deletes current element we
can document that virHashForEach must not touch the hash table in any
way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
'virHashForEach' historically allowed deletion of the current element as
'virHashRemoveSet' didn't exist. To prevent us from having to deeply
analyse all iterators add virHashForEachSafe which first gets a list of
elements and iterates them outside of the hash table.
This will allow replace the internals of the hash table with other
implementation which don't allow such operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Iterate the hash elements sorted by key. This is useful to provide a
stable ordering such as in cases when the output is checked in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The remember owner feature uses XATTRs to store original
seclabels. But that means we don't want a regular user to be able
to change what we stored and thus trick us into setting different
seclabel. Therefore, we use namespaces that are reserved to
CAP_SYS_ADMIN only. Such namespaces exist on Linux and FreeBSD.
That also means, that the whole feature is enabled only for
qemu:///system. Now, while the secdriver code is capable of
dealing with XATTRs being unsupported (it has to, not all
filesystems support them) if the feature is enabled users will
get an harmless error message in the logs and the feature
disables itself.
Since we have virSecurityXATTRNamespaceDefined() we can use it to
make a wiser decision on the default state of the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For seclabel remembering we need to have XATTRs and a special
namespace that is accessibly to CAP_SYS_ADMIN only (we don't want
regular users to trick us into restoring to a different label).
And what qemusecuritytest does is it checks whether we have not
left any path behind with XATTRs or not restored to original
seclabel after setAll + restoreAll round trip. But it can hardly
do so if ran on a platform where there's no XATTR namespace we
can use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are three internal APIs implemented in this security_util
file: virSecurityGetRememberedLabel(),
virSecuritySetRememberedLabel() and
virSecurityMoveRememberedLabel() for getting, setting and moving
remembered seclabel. All three have a special return value of -2
when XATTRs are not supported (for whatever reason) and callers
are expected to handle it gracefully. However, after my commit of
v5.7.0-rc1~115 it may happen that one of the three functions
returned -1 even though XATTRs are not supported (and thus -2
should have been returned).
Fixes: 7cfb7aab57
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit <99d2c6519ad18651b5959fa0a3366bcb2c1e44f3> removed parameter
from the function but did not modified ATTRIBUTE_NONNULL.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This script is intended to help in synchronizing i386 QEMU cpu model
definitions with libvirt.
As the QEMU cpu model definitions are post processed by QEMU and not
meant to be consumed by third parties directly, parsing this
information is imperfect. Additionally, the libvirt models contain
information that cannot be generated from the QEMU data, preventing
fully automated usage. The output should nevertheless be helpful for
a human in determining potentially interesting changes.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt services and sockets *and* libvirt-guests.service
is running, the latter will sometimes hang when trying to connect to
libvirtd. Even though libvirt-guests has 'Wants=libvirtd.service' and
'After=libvirtd.service', we can see via journalctl that it is not
shutdown before libvirtd when executing something like
systemctl try-restart libvirtd.service libvirtd.socket \
libvirtd-ro.socket virtlockd.service virtlockd.socket \
virtlogd.service virtlogd.socket virt-guest-shutdown.target
Oct 28 15:53:31 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:53:31 systemd[1]: libvirtd.service: Succeeded.
Oct 28 15:53:31 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:53:31 systemd[1]: libvirtd-admin.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: libvirtd-ro.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: libvirtd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: virtlockd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: virtlogd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
In this case, the try-restart command hung and libvirt-guests was stuck
trying to connect to libvirtd. In the following case, the try-restart
worked since libvirtd was started again before libvirt-guests was stopped!
Oct 28 15:19:02 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:19:02 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Starting Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Virtualization daemon.
Oct 28 15:19:02 libvirt-guests.sh[4912]: Running guests on default URI: no running guests.
Oct 28 15:19:02 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:19:02 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Adding 'Requires=libvirtd.service' to virt-guest-shutdown.target results
in expected behavior
Oct 28 15:40:00 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 libvirt-guests.sh[5245]: Running guests on default URI: no running guests.
Oct 28 15:40:00 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:40:00 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Starting Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Started Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Make use of g_autofree
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move XML formatting code into a new method.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract PCI code from virNodeDevPCICapMdevTypesParseXML to make
method virNodeDevCapMdevTypesParseXML generic for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Extract the XML formatting for mdev_types from PCI capability into
a generic standalone method for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extracting PCI from virNodeDeviceGetPCIMdevTypesCaps creating
virNodeDeviceGetMdevTypesCaps to make later reuse possible.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove mix of array length and error code in the return code.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract virPCIGetMdevTypes from PCI as virMediatedDeviceGetMdevTypes
into mdev for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The nodedev schema defines that a mdev_types capability must have
one or more type elements. The XML parsing and the format allows to
accept and to write mdev_types capability without any type element.
This patches fixes this.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Aleksandr Alekseev <alexander.alekseev@virtuozzo.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Aleksandr Alekseev <alexander.alekseev@virtuozzo.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Function to compare CPU on 64-bits PowerPC is ignoring the flag to avoid failure
in case of CPUs (host and guest) are incompatible. Basically, the function is
returning -1 even if it is set to continue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that every caller to copyPlacement doesn't pass absolute path there
is no need to have a condition to handle that case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The old code passed an absolute path to virCgroupNewFromParent() which
is not necessary. The code can take the current placement of parent
cgroup and append a relative path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virStringSplit() to get the list of directories needed to be
created. This improves readability of the code and stops passing
absolute path to virCgroupNewFromParent().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently this task is done by virCgroupCopyPlacement when the @path
starts with "/".
virCgroupNew is always called with @path starting with "/" and there is
no parent to copy path from. To make it obvious what the code is doing
introduce new helper.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is relevant only with cgroups v1 where it creates
hierarchy for controllers that are not managed by systemd. PID is used
to detect a placement of current process but in this situation we are
building the hierarchy for already known placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is only used for debug and error purposes which can be easily
replaced by @placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 working with controllers is a bit more complicated then
with cgroups v1 where the controller had to be mounted.
There are two files, cgroups.controllers and cgroup.subtree_control.
The file cgroup.controllers lists all controllers enabled in the current
cgroup and cgroups.subtree_control, as the name suggest, controls which
controllers are enabled for a subtree of cgroups.
Now the issue here is that the current code doesn't make any difference
if the @parent variable is NULL or not because ../cgroup.subtree_control
will list the same controllers as ./cgroup.controllers.
The whole point of the @parent variable is when we are building the
cgroup topology ourselves without systemd help we need to detect which
controllers are enabled in the parent cgroup in order to enable them for
the current cgroup as well and for that we need to check
cgroup.controllers of the parent group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd starts a VM it internally stores a path to the main
cgroup. When we restart libvirtd we should get to the same state.
When we start a VM on host with systemd the cgroup is created for us and
the process is already placed into that cgroup and we detect the path
created by systemd using /proc/$PID/cgroup. After that we create
sub-cgroups and move all threads there.
Once libvirtd is restarted we again detect the cgroup path using
/proc/$PID/cgroup, but in this case we will get a different path because
the main thread was moved to a "emulator" cgroup.
Instead of ignoring the "emulator" directory when validating cgroups
remove it completely when detecting cgroup otherwise cgroups will not
work properly when libvirtd is restarted.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 the file cgroup.procs will never be empty if threading
is enabled as it will always have ID of all processes even if all
threads of the processes are moved to sub-cgroups. If that happens the
file cgroup.threads will be empty.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In both cases priv->cgroup will always be NULL because it is called
before the QEMU process is started and cgroups are configured.
In qemuProcessLaunch() the call order is following:
qemuExtDevicesStart()
...
virCommandRun()
...
qemuSetupCgroup()
where qemuDBusStart() is called from qemuExtDevicesStart() but we
cgroups are created in qemuSetupCgroup().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This should have been included with the upgrade to openwsman 2.6.3.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This places it next to existing related functions.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* use the same section comment in the header and code
* place the items in the same relative location within the .h and .c
* one parameter per line for multiline function definitions
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Once the DIR* in virPCIGetName() was made g_autoptr, the cleanup:
label just had a "return ret;", but the rest of the function was more
compilcated than it needed to be, doing funky things with the value of
ret inside multi-level conditionals and a while loop that might exit
early via a break with ret == 0 or exit early via a goto cleanup with
ret == -1.
It really didn't need to be nearly as complicated. After doing the
trivial replacements of "goto cleanup" with appropriate direct
returns, it became obvious that:
1) the outermost level of the nested conditional at the end of the
function ("if (ret < 0)") was now redundant, since ret is now
*always* < 0 by that point (otherwise the function has returned).
2) by switching the sense of the next level of the conditional (making
it "if (!physPortID)", the "else" (which is now just "return 0;"
becomes the "if", and the new "else" no longer needs to be inside
the conditional.
3) the value of firstEntryName can be moved into *netname with
g_steal_pointer()
Once that is all done, ret is no longer used and can be removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since every single use of DIR* was converted to use g_autoptr, this
function is not currently needed. Even if someone comes up with a
usage for a non-g_autoptr DIR* in the future, they can just use
virDirClose(), since there is no longer a semantic difference between
the two (VIR_DIR_CLOSE() previously had an extra & on the pointer so
that it could be transparently passed as a DIR** to virDirClose(), but
that was removed several commits back.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This use of DIR* was re-using the same function-scope DIR* each time
through a for loop, and due to multiple error gotos in the loop, it
needed to have the scope of the DIR* reduced to just the loop at the
same time as switching to g_autoptr. That's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In order to make a usable g_autoptr(DIR), we need to have a close
function that is a NOP when the pointer is NULL, but takes a simple
DIR*. But virDirClose() (candidate to be the g_autoptr cleanup
function) currently takes a DIR**, not DIR*. It does this so that it
can clear the pointer, thus making it safe to call virDirClose on the
same DIR multiple times.
In the past the clearing of the DIR* was essential in a few places,
but those few places have now been changed, so we can modify
virDirClose() to take a DIR*, and remove the side effect of clearing
the DIR*. This will make it directly usable as the g_autoptr cleanup,
and will mean that this:
{
DIR *dirp = NULL;
blah blah ...
VIR_DIR_CLOSE(dirp)
}
is functionally identical to
{
g_autoptr(DIR) dirp = NULL;
blah blah ...
}
which will make conversion to using g_autoptr mechanical and simple to review.
(Note that virDirClose() will still check for NULL before attempting
to close, so that it can always be safely called, as long as the DIR*
was initialized to NULL (another prerequisite of becoming a g_autoptr
cleanup function)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In all uses of VIR_DIR_CLOSE() except one, the DIR* is never
referenced after closing all the way until it goes out of
scope. virCapabilitiesInitCaches(), however, reuses the same DIR* over
and over in a loop, but due to having many error conditions that
result in a goto out of the loop, it's not well suited to reducing the
scope of the variable until we introduce a g_autoptr cleanup function
for DIR*.
In preparation for doing just that, we need to get rid of the side
effect of VIR_DIR_CLOSE() setting the DIR* to NULL, so in this one
case, let's manually set the DIR* to NULL. Then in an upcoming patch
we can safely remove the side effect from VIR_DIR_CLOSE().
This extra/ugly bit of code is only temporary: once we introduce the
g_autoptr cleanup function for DIR*, we will remove this manual
close/clear completely anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DIR *dh is being re-used each time through the for loop of this
function, so it must be closed and then re-opened, which means we
can't convert it to g_autoptr. By moving the definition of dh inside
the for loop, we make it possible to trivially convert to g_autoptr
(which will happen in a subsequent patch)
NB: VIR_DIR_CLOSE() is already called at the bottom of the for loop,
so removing the VIR_DIR_CLOSE() at the end of the function is *not*
creating a leak of a DIR*!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
VIR_DIR_CLOSE(dir) is called in the middle of
virStorageBackendRefreshLocal(), which is okay, but redundant - there
is no reference to dir between that call and the end of the function,
where VIR_DIR_CLOSE() is called again. Remove the extra call in the
middle to simplify the function and make the conversion to g_autoptr
trivial/mechanical.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In v6.6.0-rc1~124 we've introduced a new mechanism for MAC
addresses for ESX: ignore all checks (type='static') that libvirt
or ESX would do (and possibly fail) for specified MAC address.
Accepted values for the @type attribute are "generated" and
"static". But the error message mentions a different attribute.
Fixes 454e5961ab
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1892130
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemu stabilized it's interface and we've switched to the new
design we can re-enable use of 'block-export-add'
This reverts commit b87cfc957f
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu decided to modify the arguments of 'block-export-add' to include an
array of bitmaps rather than a single bitmap.
Since we've added the code prior to qemu setting the interface in stone
and thus it will be changed incompatibly and we already have tests for
the new interface we need to update the code and qemu capabilities data
at the same time.
Use a array of bitmaps as the 'bitmaps' argument instead of 'bitmap' and
bump qemu capabilities for the upcoming 5.2.0 release to
v5.1.0-2827-g2c6605389c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 53aec799fa introduced the function udevGetVDPACharDev(),
which scans a directory using virDirOpenIfExists() and
virDirRead(). It unfortunately forgets to close the DIR* when it is
finished with it. This patch fixes that omission.
Fixes: 53aec799fa
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use the capability to switch to using 'block-export-add' in the
upcoming qemu release instead of the at the same time deprecated
'nbd-server-add'.
Unfortunately qemu wants to change the interface of 'block-export-add'
before the release. Since we've tried to stay up to date and added the
code before it was written in stone, we need to disable the use of the
new interface for the upcoming libvirt release so that we don't have a
version of libvirt which would not work with the upcoming qemu version.
Remove the detection of 'block-export-add' until we are more sure how
the qemu interface will look.
This patch partially reverts commit adb9f7123a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The cpu mask was free()'d immediately on any error and at the end of the
function, where it was expected that it would either error out and return or
goto another allocation if the code was to fail. However since commit
9514e24984 the error path did not return in one new case which caused
double-free in such situation. In order to make the code more straightforward
just free the mask after it's been used even before checking the return code of
the call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819801
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently all errors from qemuInterfacePrepareSlirp() are completely
ignored by the callers. The intention is that missing qemu-slirp binary
should cause the caller to fallback to the built-in slirp impl.
Many of the possible errors though should indeed be considered fatal.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to figure out whether virt-ssh-helper is available
on the remote host, we mistakenly look for the helper by the
name it had while the feature was being worked on instead of
the one that was ultimately picked, and thus end up using the
netcat fallback every single time.
Fixes: f8ec7c842d
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate cleanup code by using g_autofree.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In recent commit v6.8.0-135-g518be41aaa the formatting of NBD
into migration cookie was moved into a separate function and with
it it was switched from direct printing into the output buffer to
virXMLFormatElement(). But there was a typo. The
virXMLFormatElement() accepts two buffers on input, one for
element attributes and another for child elements. Well, the line
that was supposed to add NBD port into the attributes buffer
printed the attribute directly into the output buffer which
produced this mangled XML:
<qemu-migration>
port='49153'<nbd>
<disk target='vda' capacity='8589934592'/>
<disk target='vdb' capacity='12746752000'/>
</nbd>
</qemu-migration>
Changing the incriminated line to print into the attributes
buffer fixes the problem.
Fixes: 518be41aaa
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In one of recent patches the way that we start NBD server for
incoming migration was reworked (v6.8.0-rc1~298). A new boolean
was introduced that tracks whether the NBD server was started so
that we don't start it twice nor record in the port in the port
allocator twice. Well, this idea is good, but in the
implementation the boolean is never set, so we are reserving the
port twice and would be starting the NBD server twice too if it
wasn't for port reservation fail.
Fixes: e74d627bb3
Reported-by: Vjaceslavs Klimovs <vklimovs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Guests should be allowed to create hard links on mounted pathes, since
many applications rely on this functionality and would error on guest
with current "rw" AppArmor permission with 9pfs.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In qemuDomainLogContextNew() the domain log file is opened.
Twice, the first time for writing, and the second time for
reading (if required by caller). When opening the log file for
reading a mode is provided. This doesn't do much harm, but is
unnecessary. Drop the mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Trivial fix to improve readability by combining these into a compound
conditional.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Coverity reported a potential resource leak. While it's probably not
a real-world scenario, the code could technically jump to cleanup
between the time that vdpafd is opened and when it is used. Ensure that
it gets cleaned up in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 5.2 (commit-77b285f7f6), QEMU supports 'memory failure'
event, posts event to monitor if hitting a hardware memory error.
Fully support this feature for QEMU.
Test with commit 'libvirt: support memory failure event', build a
little complex environment(nested KVM):
1, install newly built libvirt in L1, and start a L2 vm. run command
in L1:
~# virsh event l2 --event memory-failure
2, run command in L0 to inject MCE to L1:
~# virsh qemu-monitor-command l1 --hmp mce 0 9 0xbd000000000000c0 0xd 0x62000000 0x8c
Test result in l1(recipient hypervisor case):
event 'memory-failure' for domain l2:
recipient: hypervisor
action: ignore
flags:
action required: 0
recursive: 0
Test result in l1(recipient guest case):
event 'memory-failure' for domain l2:
recipient: guest
action: inject
flags:
action required: 0
recursive: 0
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.
Several changes in this patch:
public API:
include/*
src/conf/*
src/remote/*
src/remote_protocol-structs
client:
examples/c/misc/event-test.c
tools/virsh-domain.c
With this patch, each driver could implement its own method to run
this new event.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is mostly opening hyperv driver sources in vim, selecting
everything, hitting reformat and then fixing a very few places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
In some places we separate functions with only one line, in
others with three lines and the rest uses two lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
A few commits ago, hypervRequestStateChange() helper was
introduced which has exactly the same code as a part of
hypervDomainSuspend(). Deduplicate by calling the helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The hypervCreateInvokeParamsList() function sets an error on a
failure, therefore there is no need to report another error in
callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Since we use virHashTable for string-keyed values only, we can remove
all the callbacks which allowed universal keys.
Code which wishes to use non-string keys should use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The only place we call it is in virHashNew. Move the code to virHashNew
and remove virHashCreateFull.
Code wishing to use non-strings as hash table keys will be better off
using glib's GHashTable directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virHashCreate will be removed in upcoming patches. This change has an
impact on ordering of the blockjob entries in one of the status XML->XML
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export the freeing function rather than having a wrapper for the hash
creation function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rewrite using GHashTable which already has interfaces for using a number
as hash key.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove 'cleanup' label and simplify remembering of the returned value
from the callback.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rewrite using GHashTable which already has interfaces for using a number
as hash key. Glib's implementation doesn't copy the key by default, so
we need to allocate it, but overal the interface is more suited for this
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's used only in one place in tests which isn't even automatically
evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCgroupKillRecursive sneakily initializes 'ret' to 0 rather than the
usual -1. 401030499b moved an error condition but didn't actually
modify 'ret' return the proper error code.
Fixes: 401030499b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The @canonical_path variable holds canonicalized path passed as
argv[1]. The canonicalized path is obtained either via
virFileResolveLink() or plain g_strdup(). Nevertheless, in both
cases it must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some functions called from parthelper can report an error. But
that means that the error object must be initialized otherwise
virResetError() (which happens as a part of virReportError())
will free random pointers.
Reported-by: Katerina Koukiou <kkoukiou@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virPCIDeviceAddressGetSysfsFile() is simpler to call.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These were nops once enough cleanup was g_auto'd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
thisPhysPortID is only used inside a conditional, so reduce its scope
to just the body of that conditional, which will eliminate the need
for the undesirable manual VIR_FREE().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function had a loop that was only executed twice; it was
artificially constructed with a label, a goto, and a boolean to tell
that it had already been executed once. Aside from that, the body of
the loop contained only two lines that needed to be repeated (the
second time through, everything beyond those two lines would be
skipped).
One side effect of this strange loop was that a g_autofree string was
manually freed and re-initialized; I've been told that manually
freeing a g_auto_free object is highly discouraged.
This patch refactors the function to simply repeat the 2 lines that
might possibly be executed twice, thus eliminating the ugly use of
goto to construct a loop, and also takes advantage of the fact that
virPCIDriverDir() was previously returning *exactly* the same string
both times it was called to eliminate the manual VIR_FREE of drvpath.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and since
it can't return NULL, no need for callers to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and ever
since we switched to glib for memory allocation, there is no possibility
it can return NULL, so callers don't need to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apparently at some point in the past, when there were multiple types
to represent PCI addresses, the function
virPCIDeviceAddressGetSysfsFile() used one of those types, while
virDomainHostDevDef used another. It's been quite awhile since we
reduced the number of different representations of PCI address, but
this function was still creating a temporary virPCIDeviceAddress, then
copying the individual elements into this temporary object from the
same type of object in the virDomainHostDevDef.
This patch just eliminates that pointless copy.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When this function was recently changed to add in parsing of
IFLA_VF_STATS, I noticed that the checks for existence of IFLA_VF_MAC
and IFLA_VF_VLAN were looking in the *wrong array*. The array that
contains the results of parsing each IFLA_VFINFO in
tb[IFLA_VFINFO_LIST] is tb_vf, but we were checking for these in tb
(which is the array containing the results of the toplevel parsing of
the netlink message, *not* the results of parsing one of the nested
IFLA_VFINFO's.
This incorrect code has been here since the function was originally
written in 2012. It has only worked all these years due to coincidence
- the items at those indexes in tb are IFLA_ADDRESS and IFLA_BROADCAST
(of the *PF*, not of any of its VFs), and those happen to always be
present in the toplevel netlink message; since we are only looking in
the incorrect place to check for mere existence of the attribute (but
are doing the actual retrieval of the attribute from the correct
place), this bug has no real consequences other than confusing anyone
trying to understand the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetDevParseVfConfig has became a multifunctional helper function,
rename it to virNetDevParseVfInfo.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
add-fd, remove-fd, and query-fdsets provide functionality that can be
used for passing fds to qemu and closing fdsets that are no longer
necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not necessarily clear, why we need to create the hash table
as big as number of fields we want to store, but nevertheless,
the code can be written a bit better. The @count should be type
of size_t and could be used directly in the loop that counts the
fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The hypervSetEmbeddedProperty() function is used to update a
value for given property in a list of properties created by
hypervCreateEmbeddedParam(). The list is nothing fancy - it's a
virHashTable that has NULL as dataFree callback => the table does
not own the value. This is not that obvious since
hypervSetEmbeddedProperty() accepts a non-const pointer. This
fact makes it unnecessary hard to consume, e.g. if we wanted to
pass a stack allocated string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Now, that ownership transfer of hypervSetEmbeddedProperty() is
clear, we can use automatic freeing of the hash table.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon successful return hypervAddEmbeddedParam() transfers
ownership of @table argument to @params. But because it takes
only simple pointer (which hides this ownership transfer) it
doesn't clear the @table pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Now, that hypervInvokeMethod() clears the passed pointer we don't
need a special cleanup label ('params_cleanup') that handles
non-obvious ownership transfer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon invocation, hypervInvokeMethod() consumes passed @params
(the second argument) regardless whether success or failure is
released. However, it takes only simple pointer (which hides this
ownership transfer) and because of that it doesn't clear it.
Switch to double pointer and tweak the documentation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the function to qemuValidateDomainVCpuTopology() to reflect
what it is currently doing as well.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have a lot of "if (usingVirtio)" checks being done while
constructing the NIC command line. Let's put all of them in
a single "if".
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Account for the possible SATA disks too, which means 120 potential
disks.
This means the size of the array triples, however that is unavoidable
with the current way of reading disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add it to the list of 'deviceType' values ignored for disks.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the private helpers for parsing and formatting of domain
elements as private static functions in vmx.c, to avoid using them
directly.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These variables seem to be left over from a previous refactoring and
they don't add anything to the code.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
...if a machine memory-backend using shared memory is configured for
the guest. This is especially important for QEMU machine types that
don't have NUMA but virtiofs support.
An example snippet:
<domain type='kvm'>
<name>test</name>
<memory unit='KiB'>2097152</memory>
<memoryBacking>
<access mode='shared'/>
</memoryBacking>
<devices>
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/tmp/test'/>
<target dir='coffee'/>
</filesystem>
...
</devices>
...
</domain>
and the corresponding QEMU command line:
/usr/bin/qemu-system-s390x \
-machine s390-ccw-virtio-5.2,memory-backend=s390.ram \
-m 2048 \
-object
memory-backend-file,id=s390.ram,mem-path=/var/lib/libvirt/qemu/ram/46-test/s390.ram,share=yes,size=2147483648 \
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables the free-page-reporting in qemu.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will add the proper documentation and parser support for the free page
reporting feature that is introduced in QEMU 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This helper changes the root qdisc on given interface.
Ideally, it would be written using netlink but my attempts to
write the code were not successful and thus I've fallen back to
virCommand() + tc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently setting max_len=0 causes virtlogd to spin in a busy loop. It
is natural to allow this to disable log rollover which can be useful for
developers debugging things.
Note disabling rollover exposes the host to denial of service from a
malicious guest, so must be used with care.
Closes https://gitlab.com/libvirt/libvirt/-/issues/85
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes commit <d5b05614dfbc9bd60ea1a31a9cc32aaf3c771ddc> which changed
allocation from VIR_ALLOC_N to g_new0 but missed one +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Fixes commit <a5d88ffe0ad9b5d5314ab0058c5b363f9f79b8ee> which changed
allocation from VIR_ALLOC_N to g_new0 but missed some +1 on number of
allocated elements.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If storage migration is requested, and the destination storage does
not exist on the remote host, qemu's migration support will call
into the libvirt storage driver to precreate the destination storage.
The storage driver virConnectPtr is opened too early though, adding
an unnecessary dependency on the storage driver for several cases
that don't require it. This currently requires kubevirt to install
the storage driver even though they aren't actually using it.
Push the virGetConnectStorage calls to right before the cases they are
actually needed.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim of virSocketAddrPrefixToNetmask() is to initialize passed
virSocketAddr structure based on prefix length and family.
However, it doesn't set all members in the struct which may lead
to reads of uninitialized values:
==15421== Use of uninitialised value of size 8
==15421== at 0x50F297A: _itoa_word (in /lib64/libc-2.31.so)
==15421== by 0x510C8FE: __vfprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x5120295: __vsnprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x50F8969: snprintf (in /lib64/libc-2.31.so)
==15421== by 0x51BB602: getnameinfo (in /lib64/libc-2.31.so)
==15421== by 0x496DEE0: virSocketAddrFormatFull (virsocketaddr.c:486)
==15421== by 0x496DD9F: virSocketAddrFormat (virsocketaddr.c:444)
==15421== by 0x11871F: networkDnsmasqConfContents (bridge_driver.c:1404)
==15421== by 0x1118F5: testCompareXMLToConfFiles (networkxml2conftest.c:48)
==15421== by 0x111BAF: testCompareXMLToConfHelper (networkxml2conftest.c:112)
==15421== by 0x112679: virTestRun (testutils.c:142)
==15421== by 0x111D09: mymain (networkxml2conftest.c:144)
==15421== Uninitialised value was created by a stack allocation
==15421== at 0x1175D2: networkDnsmasqConfContents (bridge_driver.c:1056)
All callers expect the function to initialize the structure
fully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Fixes: 8487595bee
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The original descirption for *_tls_x509_verify is a little misleading
by saying that "Enabling this option will reject any client who does
not have a ca-cert.pem certificate".
Signed-off-by: Fangge Jin <fjin@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
