This reverts commit 8d6c3659b8.
After further list discussion, it was decided that pulling in
wireshark as a dependency is a bit too much for the base 'libvirt'
package. Remember also that 'libvirt-devel' is also not pulled in
by the base 'libvirt' - the metapackage exists for full
functionality of libvirtd, rather than to pull in all subpackages.
In general, the 'libvirt' metapackage should pull in all subpackages.
Fix this for the wireshark subpackage created in commit f9ada9f.
* libvirt.spec.in (Requires): Add dependency.
Signed-off-by: Eric Blake <eblake@redhat.com>
When building modules, libvirt-daemon-config-network requires
libvirt-daemon-driver-network to ensure the 'default' network
is setup properly
Signed-off-by: Eric Blake <eblake@redhat.com>
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).
lxc.network.type = phys
lxc.network.link = eth0.5
lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
Some of the LXC configuration properties aren't migrated since they
would only cause problems in libvirt-lxc:
* lxc.network.ipv[46]: LXC driver doesn't setup IP address of guests,
see rhbz#1059624
* lxc.network.name, see rhbz#1059630
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
LXC rootfs can be either a directory or a block device or an image
file. The first two types have been implemented, but the image file is
still to be done since LXC auto-guesses the file format at mount time
and the LXC driver doesn't support the 'auto' format.
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.
Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config
It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.
fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.
As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
virConf now honours a VIR_CONF_FLAG_LXC_FORMAT flag to handle LXC
configuration files. The differences are that property names can
contain '.' character and values are all strings without any bounding
quotes.
Provide a new virConfWalk function calling a handler on all non-comment
values. This function will be used by the LXC conversion code to loop
over LXC configuration lines.
Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.
Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.
As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.
* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Following the patterns established by lifecycle events, this
creates all the new RPC calls needed to pass callback IDs
for every domain event, and changes the limits in client and
server codes to use modern style when possible.
I've tested all combinations: both 'old client and new server'
and 'new client and old server' continue to work with the old
RPCs, and 'new client and new server' benefit from server-side
filtering with the new RPCs.
* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_EVENT_*): Add
REMOTE_PROC_DOMAIN_EVENT_CALLBACK_* counterparts.
* daemon/remote.c (remoteRelayDomainEvent*): Send callbackID via
newer RPC when used with new-style registration.
(remoteDispatchConnectDomainEventCallbackRegisterAny): Extend to
cover all domain events.
* src/remote/remote_driver.c (remoteDomainBuildEvent*): Add new
Callback and Helper functions.
(remoteEvents): Match order of RPC numbers, register new handlers.
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Extend to cover all
domain events.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The counterpart to the server RPC additions; here, a single
function can serve both old and new calls, while incoming
events must be serviced by two different functions. Again,
some wise choices in our XDR made it easier to share code
managing similar events.
While this only supports lifecycle events, it covers the
harder part of how Register and RegisterAny interact; the
remaining 15 events will be a mechanical change in a later
patch. For Register, we now have a callbackID locally for
more efficient cleanup if the RPC fails; we also prefer to
use the newer RPC where we know it is supported (the older
RPC must be used if we don't know if RegisterAny is
supported).
* src/remote/remote_driver.c (remoteEvents): Register new RPC
event handler.
(remoteDomainBuildEventLifecycle): Move guts...
(remoteDomainBuildEventLifecycleHelper): ...here.
(remoteDomainBuildEventCallbackLifecycle): New function.
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventDeregister)
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Use new RPC when supported.
We want to convert over to server-side events, even for older
APIs. To do that, the client side of the remote driver wants
to distinguish between legacy virConnectDomainEventRegister and
normal virConnectDomainEventRegisterAny, while knowing the
client callbackID and the server's serverID for both types of
registration. The client also needs to probe whether the
server supports server-side filtering. However, for ease of
review, we don't actually use the new RPCs until a later patch.
* src/conf/object_event_private.h (virObjectEventStateCallbackID):
Add parameter.
* src/conf/object_event.c (virObjectEventCallbackListAddID)
(virObjectEventStateRegisterID): Separate legacy from callbackID.
(virObjectEventStateCallbackID): Pass through parameter.
(virObjectEventCallbackLookup): Let legacy and global domain
lifecycle events share a common remoteID.
* src/conf/network_event.c (virNetworkEventStateRegisterID):
Update caller.
* src/conf/domain_event.c (virDomainEventStateRegister)
(virDomainEventStateRegisterID, virDomainEventStateDeregister):
Likewise.
(virDomainEventStateRegisterClient)
(virDomainEventStateCallbackID): Implement new functions.
* src/conf/domain_event.h (virDomainEventStateRegisterClient)
(virDomainEventStateCallbackID): New prototypes.
* src/remote/remote_driver.c (private_data): Add field.
(doRemoteOpen): Probe server feature.
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Use new function.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds some new RPC call numbers, but for ease of review,
they sit idle until a later patch adds the client counterpart to
drive the new RPCs. Also for ease of review, I limited this patch
to just the lifecycle event; although converting the remaining
15 domain events will be quite mechanical. On the server side,
we have to have a function per RPC call, largely with duplicated
bodies (the key difference being that we store in our callback
opaque pointer whether events should be fired with old or new
style); meanwhile, a single function can drive multiple RPC
messages. With a strategic choice of XDR struct layout, we can
make the event generation code for both styles fairly compact.
I debated about adding a tri-state witness variable per
connection (values 'unknown', 'legacy', 'modern'). It would start
as 'unknown', move to 'legacy' if any RPC call is made to a legacy
event call, and move to 'modern' if the feature probe is made;
then the event code could issue an error if the witness state is
incorrect (a legacy RPC call while in 'modern', a modern RPC call
while in 'unknown' or 'legacy', and a feature probe while in
'legacy' or 'modern'). But while it might prevent odd behavior
caused by protocol fuzzing, I don't see that it would prevent
any security holes, so I considered it bloat.
Note that sticking @acl markers on the new RPCs generates unused
functions in access/viraccessapicheck.c, because there is no new
API call that needs to use the new checks; however, having a
consistent .x file is worth the dead code.
* src/libvirt_internal.h (VIR_DRV_FEATURE_REMOTE_EVENT_CALLBACK):
New feature.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_REGISTER_ANY)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_DEREGISTER_ANY)
(REMOTE_PROC_DOMAIN_EVENT_CALLBACK_LIFECYCLE): New RPCs.
* daemon/remote.c (daemonClientCallback): Add field.
(remoteDispatchConnectDomainEventCallbackRegisterAny)
(remoteDispatchConnectDomainEventCallbackDeregisterAny): New
functions.
(remoteDispatchConnectDomainEventRegisterAny)
(remoteDispatchConnectDomainEventDeregisterAny): Mark legacy use.
(remoteRelayDomainEventLifecycle): Change message based on legacy
or new use.
(remoteDispatchConnectSupportsFeature): Advertise new feature.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch continues the earlier conversion made for network
events, with a goal of introducing server-side event filtering
in a later patch. Actual behavior is unchanged without
further RPC changes.
* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
domain events.
* daemon/remote.c (remoteClientInitHook, remoteClientFreeFunc)
(remoteRelayDomainEvent*)
(remoteDispatchConnectDomainEventRegister)
(remoteDispatchConnectDomainEventRegisterAny): Track domain
callbacks dynamically.
virGetStorageVol can return NULL on out-of-memory. If it does, cleanly
abort the volume clone operation.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This reverts commit 67ccf91bf2.
We only generate the volume key after we've built it, but the storage
driver expects it to be filled after createVol finishes.
Squash the volume building back with creating to fulfill this
expectation.
The security driver expects /etc/apparmor.d/libvirt/TEMPLATE but we
installed it to /etc/apparmor.d/libvirtd/TEMPLATE. Move the template to
the expected place since that code was here long before.
Openstack Nova calls virConnectBaselineCPU() during initialization
of the instance to get a full list of CPU features.
This patch adds a stub to aarch64-specific code to handle
this request (no actual work is done). That's enough to have
this stub with limited functionality because qemu/kvm backend
supports only 'host-passthrough' cpu mode on aarch64.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
A small fix for the possiblitiy of jumping to an error path before
registering for domain events, preventing receiving important ones
like shutdown and death.
This shadows the index function on some systems (RHEL-6.4, FreeBSD 9):
../../src/conf/capabilities.c: In function 'virCapabilitiesGetCpusForNode':
../../src/conf/capabilities.c:1005: warning: declaration of'index'
shadows a global declaration [-Wshadow]
/usr/include/strings.h:57: warning: shadowed declaration is here [-Wshadow]
This test creates a Fake NUMA topology with non-sequential cell ids
to check if libvirt properly handles the same
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
On some platforms like IBM PowerNV the NUMA node numbers can be
non-sequential. For eg. numactl --hardware o/p from such a machine looks
as given below
node distances:
node 0 1 16 17
0: 10 40 40 40
1: 40 10 40 40
16: 40 40 10 40
17: 40 40 40 10
The NUMA nodes are 0,1,16,17
Libvirt uses sequential index as NUMA node numbers and this can
result in crash or incorrect results.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is here just to ease the code review and make related
changes look more sensible. Apart from removing the condition this is
merely a whitespace (indentation) change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Limiting ourselves to qemu without QEMU_CAPS_DEVICE capability, we
used '-serial none' only if there was no serial device defined in the
domain XML. This means that if we want to have a possibility of the
device being defined in XML, but not used in the command-line
(e.g. when it's pointless), we'll fail to attach '-serial none' to the
command-line (when skipping the device's command-line building and the
device being the only one).
Since there is no such device, this patch doesn't actually do
anything, but enables easier future additions in this manner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new RBD format supports snapshotting and cloning. By having
libvirt create images in format 2 end-users of the created images
can benefit from the new RBD format.
Older versions of libvirt can work with this new RBD format as long
as librbd supports format 2. RBD format is supported by librbd since
version 0.56 (Ceph Bobtail).
Signed-off-by: Wido den Hollander <wido@widodh.nl>
