Commit Graph

12 Commits

Author SHA1 Message Date
Pavel Hrdina
e6e26a899d tests: unify qemu binary paths for all qemu related tests
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Pavel Hrdina
36785c7e77 device: cleanup input device code
The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Ján Tomko
b33eb0dca1 qemu: auto-add pci-root controller for pc machine types
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
2013-04-25 13:05:10 +02:00
Osier Yang
d70f2e117a numad: Always output 'placement' of <vcpu>
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
2012-05-08 16:57:37 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Osier Yang
4288b22fb2 conf: Introduce new attribute for device address format
* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.
2012-02-28 14:27:11 +08:00
Marc-André Lureau
42043afcdc domain: add implicit USB controller
Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.

Fix tests to pass with this change.
2012-02-09 16:44:57 -07:00
Matthias Bolte
d9ad8ac392 Add VIR_DIV_UP to divide memory or storage request sizes with round up
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e0406c
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
2011-01-29 00:42:10 +01:00
Daniel P. Berrange
b2f1863533 Explicitly represent balloon device in XML and handle PCI address
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device

   <memballoon model='virtio|xen'/>

It can also have a PCI address, auto-assigned if necessary.

The memballoon will be automatically added to all Xen and QEMU
guests by default.

* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
  and formatting for memballoon device. Always add a memory
  balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
  PCI device address in memory balloon device
* tests/*: Update to test new functionality
2010-07-21 11:33:11 +01:00
Daniel P. Berrange
b030084f07 Auto-add disk controllers based on defined disks
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already
2010-01-18 13:35:40 +00:00
Daniel P. Berrange
776e37e1eb Set default disk controller/bus/unit props
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files
2010-01-15 16:38:29 +00:00
Daniel P. Berrange
d823a05aef Support configuration of huge pages in guests
Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests
2009-09-03 13:51:55 +01:00