Commit Graph

27 Commits

Author SHA1 Message Date
Doug Goldstein
7ab7c9a2e9 VMX: Add a VMWare Fusion 5 configuration for tests
A user was having an issue with this specific VMWare Fusion config and
he gave me permission to add it as part of our test suite to further
expand our VMX test coverage. Unfortunately our VMX parser and
generator does not support many features contained within and just
silently ignores fields it does not understand so they had to
be removed out in the xml2vmx test. The original unmodified version
exists in the vmx2xml test.
2013-09-17 14:10:41 -05:00
Doug Goldstein
834aebcc2f VMX: Add support for 'auto detect' fileNames
VMWare Fusion 5 can set the CD-ROM's device name to be 'auto detect' when
using the physical drive via 'cdrom-raw' device type. VMWare will then
connect to first available host CD-ROM to the virtual machine upon start
up according to VMWare documentation. If no device is available, it
appears that the device will remain disconnected.

To better model this a CD-ROM that is marked as "auto detect" when in
the off state would be modeled as the following with this patch:
  <disk type='block' device='lun'>
    <source startupPolicy='optional'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>

Once the domain transitions to the powered on state, libvirt can
populate the remaining source data with what is connected, if anything.
However future power cycles, the domain may not always start with that
device attached.
2013-09-17 14:10:40 -05:00
Doug Goldstein
f8456e5a18 VMX: Add cdrom-raw dev type from VMWare Fusion
According to VMWare's documentation 'cdrom-raw' is an acceptable value
for deviceType for a CD-ROM drive. The documentation states that the VMX
configuration for a CD-ROM deviceType is as follows:

ide|scsi(n):(n).deviceType = "cdrom-raw|atapi-cdrom|cdrom-image"

From the documentation it appears the following is true:
- cdrom-image = Provides the ISO to the VM
- atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM on top of the host
  CD-ROM
- cdrom-raw = Passthru for a host CD-ROM drive. Allows CD-R burning from
  within the guest.

A CD-ROM prior to this patch would always provide an 'atapi-cdrom' is
modeled as:
  <disk type='block' device='cdrom'>
    <source dev='/dev/scd0'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>

This patch allows the 'device' attribute to be set to 'lun' for a raw
acccess CD-ROM such as:
  <disk type='block' device='lun'>
    <source dev='/dev/scd0'/>
    <target dev='hda' bus='ide'/>
    <address type='drive' controller='0' bus='0' target='0' unit='0'/>
  </disk>
2013-09-02 17:41:30 -05:00
Jean-Baptiste Rouault
d4611c0ee3 vmx: handle shared folders parsing
This patch adds support for parsing vmx files with
shared folders enabled.

Update test suite accordingly.
2012-07-21 20:15:02 +02:00
Osier Yang
d70f2e117a numad: Always output 'placement' of <vcpu>
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
2012-05-08 16:57:37 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Osier Yang
4288b22fb2 conf: Introduce new attribute for device address format
* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.
2012-02-28 14:27:11 +08:00
Jean-Baptiste Rouault
f246cdb5ac vmx: Better Workstation vmx handling
This patch adds support for vmx files with empty networkName
values (which is the case for vmx generated by Workstation).
It also adds support for vmx containing NATed network interfaces.

Update test suite accordingly
2012-02-24 11:53:23 +01:00
Matthias Bolte
8357d91b65 esx: Fix regression in absolute file name handling
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.

Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.

Reported by lofic (IRC nick)
2011-05-26 23:32:44 +02:00
Matthias Bolte
81800ff647 vmx: Support persistent CPU shares 2011-04-05 08:40:57 +02:00
Matthias Bolte
c2a6b26647 vmx: Add support for video device VRAM size
Update test suite accordingly.
2011-01-06 18:18:35 +01:00
Matthias Bolte
5288881344 esx: Support SMBIOS host mode 2010-11-11 19:18:19 +01:00
Matthias Bolte
809926db8f esx: Add support for memtune/min_guarantee
Also add a test case for the VMX handling of it.
2010-11-09 19:28:33 +01:00
Matthias Bolte
02e11b8353 esx: Add support for virtual serial device network backing
Since version 4.1 ESX(i) can expose virtual serial devices over TCP.

Add support in the VMX handling code for this, add test cases to cover
it and add links to some documentation.

ESX supports two additional protocols: TELNETS and TLS. Add them to
the list of serial-over-TCP protocols.
2010-10-01 23:38:23 +02:00
Matthias Bolte
0f9c246028 esx: Allow '-' in VMX entry names
Add a test for this.

Reported by Frank Dirks.
2010-09-23 10:37:10 +02:00
Matthias Bolte
4aad5fbb96 esx: Map the .vmx annotation to the domain XML description
Take care of escaping '"' and '|' (the escape character).

Add tests for this.
2010-08-30 22:22:03 +02:00
Cole Robinson
6b24755235 domain conf: Track <console> target type
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.

This will be used to differentiate between a serial vs. virtio console for
QEMU.

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-28 16:47:59 -04:00
Matthias Bolte
afb85c5889 esx: Allow 'vmpvscsi' as SCSI controller model 2010-07-24 17:31:04 +02:00
Matthias Bolte
d72d92565b esx: Add support for the controller element
Also don't abuse the disk driver name to specify the SCSI controller
model anymore:

  <driver name='buslogic'/>

Use the newly added model attribute of the controller element for this:

  <controller type='scsi' index='0' model='buslogic'/>

The disk driver name approach is deprecated now, but still works for
backward compatibility reasons.

Update the documentation and tests accordingly.

Fix usage of the words controller and id in the VMX handling code. Use
controller, bus and unit properly.
2010-06-24 14:56:04 +02:00
Matthias Bolte
02d57c2bce esx: Update case insensitive .vmx tests
Commit b9efc7dc3b made virFileHasSuffix
case insensitive. Honor this in the tests by switching vmdk to VMDK.
2010-06-16 23:06:12 +02:00
Matthias Bolte
c6375aa796 esx: Add support for the VMXNET 2 (Enhanced) NIC model
Add a test case and document it.
2010-04-20 20:58:24 +02:00
Matthias Bolte
4acab37f56 esx: Allow 'lsisas1068' as SCSI controller type
Extend tests to cover all SCSI controller types and document the
new type.

The lsisas1068 SCSI controller type was added in ESX 4.0. The VMX
parser reports an error when this controller type is present. This
makes virsh dumpxml fail for every domain that uses this controller
type.

This patch fixes this and adds lsisas1068 to the list of accepted
SCSI controller types.

Reported by Jonathan Kelley.
2010-04-08 12:05:51 +02:00
Matthias Bolte
5edaf95599 esx: Make the conf parser compare names case insensitive in VMX mode
The keys of entries in a VMX file are case insensitive. Both scsi0:1.fileName
and scsi0:1.filename are valid. Therefore, make the conf parser compare names
case insensitive in VMX mode to accept every capitalization variation.

Also add test cases for this.
2010-03-24 21:03:37 +01:00
Matthias Bolte
c2c4d51b2f esx: Add VNC support
* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support
2010-01-18 01:44:20 +01:00
Matthias Bolte
96ceb12443 esx: Fix 'vpx' MAC address range and allow arbitrary MAC addresses
The MAC addresses with 00:50:56 prefix are split into several ranges:

  00:50:56:00:00:00 - 00:50:56:3f:ff:ff  'static' range (manually assigned)
  00:50:56:80:00:00 - 00:50:56:bf:ff:ff  'vpx' range (assigned by a VI Client)

Erroneously the 'vpx' range was assumed to be larger and to occupy the
remaining addresses of the 00:50:56 prefix that are not part of the 'static'
range.

00:50:56 was used as prefix for generated MAC addresses, this is not possible
anymore, because there are gaps in the allowed ranges. Therefore, change the
prefix to 00:0c:29 which is the prefix for auto generated MAC addresses anyway.

Allow arbitrary MAC addresses to be used and set the checkMACAddress VMX option
to false in case the MAC address doesn't fall into any predefined range.

* docs/drvesx.html.in: update website accordingly
* src/esx/esx_driver.c: set the auto generation prefix to 00:0c:29
* src/esx/esx_vmx.c: fix MAC address range handling and allow arbitrary MAC
  addresses
* tests/vmx2xml*, tests/xml2vmx*: add some basic MAC address range tests
2010-01-07 01:38:19 +01:00
Matthias Bolte
49faa15e4f ESX add esxDomainDefineXML()
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.

* src/esx/esx_driver.c: refactor datastore related path parsing into
  esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
  the traversal in esxVI_BuildFullTraversalSpecList(), add
  esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
  to convert a path into a datastore related path, add esxVMX_ParseFileName()
  to convert from VMX path format to domain XML path format, extend the other
  parsing function to be datastore aware, add esxVMX_FormatFileName() to
  convert from domain XML path format to VMX path format, fix VMX ethernet
  entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
  update VMX files to use absolute paths
2009-09-23 15:00:54 +02:00
Matthias Bolte
af4c893eb7 ESX add tests for the VMX to/from domain XML mapping
* tests/.gitignore: ignore new test binaries
* tests/Makefile.am: add new tests
* tests/esxutilstest.c: test esxVMX_IndexToDiskName()
* tests/vmx2xmldata/*: config files for the VMX to domain XML test
* tests/vmx2xmltest.c: test the VMX to domain XML mapping
* tests/xml2vmxdata/*: config files for the domain XML to VMX test
* tests/xml2vmxtest.c: test the domain XML to VMX mapping
2009-09-23 15:00:54 +02:00