Some of the test configuration files in tests/xlconfigdata
use the old qemu-dm as the emulator. Many of the configuration
features tested (spice, rbd, multi-usb) are not even usable with
the old qemu. Change these files to use the new qemu-xen (also
known as qemu upstream) emulator.
Note: This change fixes xlconfigtest failures when the old
qemu is actually installed on the system. During device post
parse, the libxl driver attempts to invoke the emulator to
determine if it is the old or new qemu so it can properly set
video RAM defaults. With the old qemu installed, the default
video RAM was set differently than the expected value.
Changing all the test data files to use qemu-xen ensures
predictable results wrt default video RAM size.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libvirt may automatically add a pci-root or pcie-root controller to a
domain, depending on the arch/machinetype, and it hopefully always
makes the right decision about which to add (since in all cases these
controllers are an implicit part of the virtual machine).
But it's always possible that someone will create a config that
explicitly supplies the wrong type of PCI controller for the selected
machinetype. In the past that would lead to an error later when
libvirt was trying to assign addresses to other devices, for example:
XML error: PCI bus is not compatible with the device at
0000:00:02.0. Device requires a PCI Express slot, which is not
provided by bus 0000:00
(that's the error message that appears if you replace the pcie-root
controller in a Q35 domain with a pci-root controller).
This patch adds a check at the same place that the implicit
controllers are added (to ensure that the same logic is used to check
which type of pci root is correct). If a pci controller with index='0'
is already present, we verify that it is of the model that we would
have otherwise added automatically; if not, an error is logged:
The PCI controller with index='0' must be " model='pcie-root' for
this machine type, " but model='pci-root' was found instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004602
Our tests should use either VIRT_TEST_MAIN() or
VIRT_TEST_MAIN_PRELOAD() macros which create main() function and
call the passed callback subsequently. This is important because
the wrapper which calls the callback eventually does important
stuff like setting logging based on env variables and such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Requires adding the plumbing for <device><video>
The value is <enum name='modelType'> to match the associated domain
XML of <video><model type='XXX'/>
Wire it up for qemu too
In other tests we use "expected" and "actual" to refer to the expected
outcome of the tested API and the result we got, respectively.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Adding new *.replies files for qemucapabilitiestest or updating the
files when libvirt adds an additional QMP command into the probing
process is quite painful. The goal of the new qemucapsprobe command is
to make this process as easy as
tests/qemucapsprobe /path/to/qemu/binary >caps.replies
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
json_reformat uses two spaces for when indenting nested objects, let's
do the same. The result of virJSONValueToString will be exactly the same
as json_reformat would produce.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new VIRT_TEST_PRELOAD macro does not force the caller to create a
special main function which would need to be called through
virtTestMain().
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently all qemu driver tests are statically linked to qemu driver
library, which makes it impossible to mock any API from the library.
This patch creates a shared qemu driver library which can be used
instead of the static one.
NB we can't use libvirt_driver_qemu.so directly since it is linked with
-module and it is supposed to be dlopened.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1286709
Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.
Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
An iothread for virtio-scsi is a property of the controller. Add a lookup
of the 'virtio-scsi-pci' and 'virtio-scsi-ccw' device properties and parse
the output. For both, support for the iothread was added in qemu 2.4
while support for virtio-scsi in general was added in qemu 1.4.
Modify the various mock capabilities replies (by hand) to reflect the
when virtio-scsi was supported and then specifically when the iothread
property was added. For versions prior to 1.4, use the no device error
return for virtio-scsi. For versions 1.4 to before 2.4, add some data
for virtio-scsi-pci even though it isn't complete we're not looking for
anything specific there anyway. For 2.4 to 2.6, add a more complete reply.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Our socket address format is in a rather non-standard format and that is
because sasl library requires the IP address and service to be delimited by a
semicolon. The string form is a completely internal matter, however once the
admin interfaces to retrieve client identity information are merged, we should
return the socket address string in a common format, e.g. format defined by
URI rfc-3986, i.e. the IP address and service are delimited by a colon and
in case of an IPv6 address, square brackets are added:
Examples:
127.0.0.1:1234
[::1]:1234
This patch changes our default format to the one described above, while adding
separate methods to request the non-standard SASL format using semicolon as a
delimiter.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This adds a ports= attribute to usb controller XML, like
<controller type='usb' model='nec-xhci' ports='8'/>
This maps to:
qemu -device nec-usb-xhci,p2=8,p3=8
Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.
https://bugzilla.redhat.com/show_bug.cgi?id=1271408
Besides ID, libvirt should provide several parameters to help the user
distinguish two clients from each other. One of them is the connection
timestamp. This patch also adds a testcase for proper JSON formatting of the
new attribute too (proper formatting of older clients that did not support
this attribute yet is included in the existing tests) - in order to
testGenerateJSON to work, a mock of time_t time(time_t *timer) needed to be
created.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Admin API needs a way of addressing specific clients. Unlike servers, which we
are happy to address by names both because its name reflects its purpose (to
some extent) and we only have two of them (so far), naming clients doesn't make
any sense, since a) each client is an anonymous, i.e. not recognized after a
disconnect followed by a reconnect, b) we can't predict what kind of requests
it's going to send to daemon, and c) the are loads of them comming and going,
so the only viable option is to use an ID which is of a reasonably wide data
type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Trying to define a domain name containing an embedded '/'
will immediately fail when trying to write the XML to disk for
our stateful drivers. This patch explicitly rejects names
containing a '/', and provides an xmlopt feature for drivers
to avoid this validation check, which is enabled in every
non-stateful driver that already has xmlopt handling wired up.
(Technically this could reject a previously accepted vmname like
'/foo', however at least for the qemu driver that falls over
later when starting qemu)
https://bugzilla.redhat.com/show_bug.cgi?id=639923
We were lacking tests that are checking for the completeness of our
nodedev XMLs and also whether we output properly formatted ones. This
patch adds parsing for the capability elements inside the <capability
type='pci'> element. Also bunch of tests are added to show everything
works properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There were few things done in the nodedev code but we were lacking tests
for it. And because of that we missed that the schema was not updated
either. Fix the schema and add various test files to show the schema
is correct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.
Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If qemu doesn't support DEVICE_TRAY_MOVED event the code that attempts
to change media would attempt to re-eject the tray even if it wouldn't
be notified when the tray opened. Add a capability bit and skip retrying
for old qemus.
The man page says: "(Re)-Connect to the hypervisor. When the shell is
first started, this is automatically run with the URI parameter
requested by the "-c" option on the command line." However, if you run:
virsh -c 'test://default' 'connect; uri'
the output will not be 'test://default'. That's because the 'connect'
command does not care about any virsh-only related settings and if it is
run without parameters, it connects with @uri == NULL. Not only that
doesn't comply to what the man page describes, but it also doesn't make
sense. It also means you aren't able to reconnect to whatever you are
connected currently.
So let's fix that in both virsh and virt-admin add a test case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Similarly to what commit 7140807917 did with some internal paths,
clear vnc socket paths that were generated by us. Having such path in
the definition can cause trouble when restoring the domain. The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.
To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated. And mark it as autogenerated
if it already exists and we're parsing live XML.
Best viewed with '-C'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45
However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:
http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html
Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely
https://bugzilla.redhat.com/show_bug.cgi?id=1074464
This unifies the test scripts to all use the similar pattern added for
schematests in ace4aecd. This gives the following
- Enables running all tests from outside of tests/ dir
- Drops redundant abs_* definitions, which are set by test-lib.sh
- Drops unnecessary srcdir variable which was only used for sourcing
test-lib.sh
Behavior changes:
- srcdir can no longer be overwritten, but I don't know why anyone would
really need to...
- Script VERBOSE setting no longer prints commands executed by test-lib.sh.
if anyone cares I suggest handling this in test-lib.sh which already
has other verbose style handling
These old tests expect to run against a real xen connection via
xend running on the host. Our intentions for the test suite are
that it doesn't require interacting with any specific host resources,
so these don't really belong here.
Store the test list in libvirtd_test_scripts, and use it where
appropriate. This also fixes the fact that we didn't ship
virsh-uriprecedence when libvirtd build is disabled.
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf
Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing
https://bugzilla.redhat.com/show_bug.cgi?id=1151409
According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:
dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0
The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
Commit a8743c39 removed keepalive_required attribute from daemon, added a test
case for it, but forgot to enable the test itself in virnetdaemontest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit a4746114 renamed virnetservertest to virnetdaemontest to reflect some
refactor changes to virNetServer code (which moved daemon-related parts to
virNetDaemon module). Moving test data from virnetserverdata to
virnetdaemondata was also part of the commit, but the commit failed to clean
half of the files that were copied (rather than moved).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.
I think it's safe to drop support for it
Commit 3a773c43c8 introduced the testCompareNetXML2XMLResult
enumeration; however, in one instance the result variable was
assigned a value from the very similar testCompareDocXML2XMLResult
enumeration, leading to a build error.
networkxml2xmltest.c:33:42: error:
implicit conversion from enumeration type 'testCompareDomXML2XMLResult'
to different enumeration type 'testCompareNetXML2XMLResult'
[-Werror,-Wenum-conversion]
testCompareNetXML2XMLResult result = TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS;
~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the proper value (TEST_COMPARE_NET_XML2XML_RESULT_SUCCESS) instead.
The struct contains a single boolean field, 'supported':
the meaning of this field is too generic to be limited to
devices only, and in fact it's already being used for
other things like loaders and OSs.
Instead of trying to come up with a more generic name just
get rid of the struct altogether.
Prior to this patch we didn't make any attempt to prevent two entries
in the array of interfaces/PCI devices from pointing to the same
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1002423
This is patterned after similar functionality for domain XML tests,
but tries harder to avoid reading non-existent networkxml2xmlout data
file when parse fails.
So in glibc-2.23 sys/sysmacros.h is no longer included from sys/types.h
and we don't build because of the usage of major/minor/makedev macros.
Autoconf already has AC_HEADER_MAJOR macro that check where exactly
these functions/macros are defined, so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).
Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.
So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.
Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.
Signed-off-by: John Ferlan <jferlan@redhat.com>
virTypedParamsValidate currently uses an index based check to find
duplicate parameters. This check does not work. Consider the following
simple example:
We have only 2 keys
A (multiples allowed)
B (multiples NOT allowed)
We are given the following list of parameters to check:
A
A
B
If you work through the validation loop you will see that our last iteration
through the loop has i=2 and j=1. In this case, i > j and keys[j].value.i will
indicate that multiples are not allowed. Both conditionals are satisfied so
an incorrect error will be given: "parameter '%s' occurs multiple times"
This patch replaces the index based check with code that remembers
the name of the last parameter seen and only triggers the error case if
the current parameter name equals the last one. This works because the
list is sorted and duplicate parameters will be grouped together.
In reality, we hit this bug while using selective block migration to migrate
a guest with 5 disks. 5 was apparently just the right number to push i > j
and hit this bug.
virsh migrate --live guestname --copy-storage-all
--migrate-disks vdb,vdc,vdd,vde,vdf
qemu+ssh://dsthost/system
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
The pxb device is a PCIe expander bus that can be added to any
Q35-based machinetype. A single PCIe port (*not* hotpluggable) is
provided; if more than one device is desired, or if hotplug
support is needed, either a pcie-root-port, or some combination of
pcie-switch-upstream-port and pcie-swith-downstream-ports must be
added to it. It can have a NUMA node number associated with it, as
well as a bus number.
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
The pxb device is a PCI expander bus that can be added to any
440fx-based machinetype. The PCI bus that is created has 32 standard
PCI slots (hotpluggable). It can have a NUMA node number associated
with it, as well as a bus number.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
* Add a test for listen=XXX and <listen address=YYY/> collision error
* Add an explicit test for listen=XXX duplicated to <listen address=XXX/>
We implicitly test it elsewhere but I figure it's better to be explicit,
and this test case can be extended in the future for additional listen
back compat if/when we support <listen type='socket'/> syntax
In qemuHotplugCreateObjects, the ret variable was filled by
the value returned by qemuTestCapsCacheInsert.
If any of the functions after this assignment failed, we would still
return success.
Also adjust testCompareXMLToArgvHelper, where this change is just
cosmetic, because the value was overwritten right away.
Add codes to support creating domain with network defition of assigning
SRIOV VF from a pool.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The address assigning code might add new pci bridges.
We need them to have an alias when building the command line.
In real word usage, this is not a problem because all the code
paths already call qemuDomainAssignAddresses. However moving
this call lets us remove one extra call from qemuxml2argvtest.
It is only used for failed address allocation
Since we already have FLAG_EXPECT_FAILURE, use that instead.
Also unify the output to print the whole log buffer instead
of just the last error message.
After removing qemuBuildCommandLineCallbacks, testutilsqemu.h does not
need to include qemu_command.h.
Include just qemu_conf.h here and qemu_domain_address.h in files that
need it.
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.
Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
Commit 119cd06 started setting the primary bool for the first
user-specified video even if user omitted the 'primary' attribute.
However this was done before the addition of the implicit device.
This broke startup of transient qemu domains with no <video>:
https://bugzilla.redhat.com/show_bug.cgi?id=1325757
Move this default to virDomainDefPostParseInternal,
after the addition of the implicit video device, to catch the implicit
video as well.
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
After the test and qemu_process refactor now we can benefit from default
listen address for spice and vnc in tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.
Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.
https://bugzilla.redhat.com/show_bug.cgi?id=1325085
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
Add a capability bit for the qemu secret object.
Adjust the 2.6.0-1 caps/replies to add the secret object. For the
.replies it's take from the '{"execute":"qom-list-types"}' output.
Commit d77ffb6876 added not only reporting of the PCI header type, but
also parsing of that information. However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail. This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.
Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being. Future patches will deal with
the rest.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
* tools/nss/libvirt_nss.[ch]: add BSD-comptabile wrappers and
register via the nss_module_register() interface
* m4/virt-nss.m4: add checks if we're building NSS for FreeBSD
* tools/Makefile.am: handle target library name differences, as
Linux needs libnss_libvirt.so.2 and FreeBSD needs
nss_libvirt.so.1. Also, different syms files have to be used
as Linux needs to export all the methods while FreeBSD
only needs to have nss_module_register()
* tests/nsstest.c, tests/nssmock.c: s/__linux__/NSS/
* tests/nssmock.c: pass int instead of mode_t to va_arg() to please
gcc 4.8
* libvirt_nss_bsd.syms: FreeBSD syms file
In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.
The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.
It was too similar to the non-scaled alternative.
before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This test was commited 4 years ago, but was never enabled in
storagepoolxml2xmltest.c. This patch reactivates it, conditionnaly on RBD
storage support being enabled
This test failed for two reasons:
* The uuid was missing from the input file
* The output file had the <name> in a different place from the actual output
If the abs_builddir path already is in PATH and it's in the first
position, due to a bug in our code PATH would be cleared out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity pointed out that getenv("PATH") may return NULL. Well,
we check for that in virFindFileInPath() too. If this happens, we
will pass NULL into strstr(). Ouch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
