Commit Graph

20 Commits

Author SHA1 Message Date
Martin Kletzander
9e1af156af qemu: add capability probing for splash-timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Peter Krempa
e260a0e60a conf: Add USB sound card support and implement it for qemu 2014-08-08 14:34:20 +02:00
Martin Kletzander
1a324c2f88 qemu: newer -numa parameter capability probing
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch.  One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification.  This
will be used in later patch.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:46 +02:00
Eric Blake
40ad7160a2 blockjob: turn on qemu capability bit for active commit
Use the probing functionality added in the last patch to turn on
a capability bit when active commit is present, and gate active
commit on that capability.

For my own reference: the difference between BLOCKJOB_SYNC and
BLOCKJOB_ASYNC is whether qemu generated an event at the
conclusion of blockpull; basically, RHEL 6.2 was the only release
of qemu that has the sync semantics and lacks the event.  RHEL
6.3 added blockcopy, but also picked up on the upstream style
of qemu generating events.  As no one is likely to backport
active commit to RHEL 6.2, it's safe for blockcommit to always
require async blockjob support.

Modifying qemucapabilitiestest is painful; the .replies files would
be so much easier if they had comments correlating which command
generated the given reply.  Maybe I'll fix that up later...

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ACTIVE_COMMIT): New
capability.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Use the new bit
* src/qemu/qemu_capabilities.c (virQEMUCaps): Name the new bit.
(virQEMUCapsProbeQMPCommands): Set it.
* tests/qemucapabilitiesdata/caps_1.3.1-1.replies: Update.
* tests/qemucapabilitiesdata/caps_1.4.2-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.5.3-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.0-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.50-1.replies: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-03 14:19:53 -06:00
Ján Tomko
f3be5f0c50 Add support for timestamping QEMU logs
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
2014-05-07 10:27:50 +02:00
Laine Stump
17133e3702 qemu: add host-pci-multidomain capability
Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.

This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
2014-05-06 14:32:33 +03:00
Li Zhang
f5ffd45f4c qemu: Add USB keyboard capability
Add USB keyboard capability probing and test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Martin Kletzander
d27e6bc40f qemu: introduce spiceport chardev backend
Add a new backend for any character device.  This backend uses channel
in spice connection.  This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.

Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well).  For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Francesco Romani
19bbc81276 spice: detect if qemu can disable file transfer
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch detects if QEMU supports this option, and add
a capability if does.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:40 +01:00
Eric Blake
a21cfb0f48 qemu: ask for -enable-fips when FIPS is required
On a system that is enforcing FIPS, most libraries honor the
current mode by default.  Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux.  So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting.  Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).

The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-18 07:05:29 -07:00
Martin Kletzander
15275f2edb qemu: check for reboot-timeout on monitor
The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2013-12-13 15:20:09 +01:00
Hu Tao
4d18758df8 qemu: add support for -device pvpanic
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-13 05:53:33 -07:00
Laine Stump
96fddee322 qemu: add "-boot strict" to commandline whenever possible
This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=888635

(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).

Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.

The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
2013-12-03 11:58:26 +02:00
Ján Tomko
1569fa14d8 qemu: don't use deprecated -no-kvm-pit-reinjection
Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2])
'-no-kvm-pit-reinjection' has been deprecated.
Use -global kvm-pit.lost_tick_policy=discard instead.

https://bugzilla.redhat.com/show_bug.cgi?id=978719

[1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39
[2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f
2013-11-05 16:04:06 +01:00
Michal Privoznik
50c5818c0d qemucapabilitiesdata: Add qemu-1.6.50 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
3e17d7956f qemucapabilitiesdata: Add qemu-1.6.0 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
47674a2241 qemucapabilitiesdata: Add qemu-1.4.2 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
37819287f8 qemucapabilitiesdata: Add qemu-1.3.1 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
f44cea7374 qemucapabilitiesdata: Add qemu-1.2.2 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
63857eb4a0 tests: Introduce qemucapabilitiestest
This test is there to ensure that our capabilities detection code isn't
broken somehow.

How to gather test data:

Firstly, the data is split into two separate files. The former (with
suffix .replies) contains all the qemu replies. This is very fragile as
introducing a new device can mean yet another monitor command and hence
edit of this file in the future. But there's no better way of doing
this. To get this data simply turn on debug logs and copy all the
QEMU_MONITOR_IO_PROCESS lines. But be careful to not copy incomplete
ones (yeah, we report some incomplete lines too). Long story short, at
the libvirtd startup, a dummy qemu is spawn to get all the capabilities.

The latter (with suffix .caps) contains capabilities XML. Just start a
domain and copy the corresponding part from its state XML file.
Including <qemuCaps> tag.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-01 11:13:36 +02:00