This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation. Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.
This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html
Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase). However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.
For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active
+ These are equivalent:
virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.
+ These are equivalent:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.
+ Similarly:
virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.
+ This version:
virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'
* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network filter objects. No flags are supported
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the node device objects, supports to filter the results
by capability types.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the interface objects, supported filtering flags
are: active|inactive.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.
include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
Simply returns the storage volume objects. No supported filter
flags.
include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
This introduces a new API to list the storage pool objects,
4 groups of flags are provided to filter the returned pools:
* Active or not
* Autostarting or not
* Persistent or not
* And the pool type.
include/libvirt/libvirt.h.in: New enum virConnectListAllStoragePoolFlags;
Declare the API.
python/generator.py: Skip the generating
src/driver.h: (virDrvConnectListAllStoragePools)
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol.
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.
Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.
This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.
Reading and writing of OpenSSH style "known_hosts" files is supported.
Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.
The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output
instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr. It
was also an awkward name: the function operates on domains, not
domain snapshots. virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.
This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.
* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups. For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.
Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:
1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.
2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.
3) The returned list is auto-allocated. This saves a lot of hassle for
the users.
4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.
Available filter groups:
Domain status:
VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE
Domain persistence:
VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
VIR_CONNECT_LIST_DOMAINS_TRANSIENT
Domain state:
VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER
Existence of managed save image:
VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE
Auto-start option:
VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART
Existence of snapshot:
VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT
5) The python binding returns a list of domain objects that is very neat
to work with.
The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.
*include/libvirt/libvirt.h.in: - add API prototype
- clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
api
*src/driver.h: - add driver prototype
- clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.
Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.
Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.
* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
virDomainSnapshotPtr has a refcount member, but no one was able
to use it. Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method. Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is! (I have future patches to virsh
that want to use it.)
* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
Add a VIR_ERR_DOMAIN_LAST sentinel for virErrorDomain and
replace the virErrorDomainName function by a VIR_ENUM_IMPL
In the process the naming of error domains is sanitized
* src/util/virterror.c: Use VIR_ENUM_IMPL for converting
error domains to strings
* include/libvirt/virterror.h: Add VIR_ERR_DOMAIN_LAST
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
This patch introduces a new block job, useful for live storage
migration using pre-copy streaming. Justification for including
this under virDomainBlockRebase rather than adding a new command
includes: 1) there are now two possible block jobs in qemu, with
virDomainBlockRebase starting either type of command, and
virDomainBlockJobInfo and virDomainBlockJobAbort working to end
either type; 2) reusing this command allows distros to backport
this feature to the libvirt 0.9.10 API without a .so bump.
Note that a future patch may add a more powerful interface named
virDomainBlockJobCopy, dedicated to just the block copy job, in
order to expose even more options (such as setting an arbitrary
format type for the destination without having to probe it from a
pre-existing destination file); adding a new command for targetting
just block copy would be similar to how we already have
virDomainBlockPull for targetting just the block pull job.
Using a live VM with the backing chain:
base <- snap1 <- snap2
as the starting point, we have:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY)
creates /path/to/copy with the same format as snap2, with no backing
file, so entire chain is copied and flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
creates /path/to/copy as a raw file, so entire chain is copied and
flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
creates /path/to/copy with the same format as snap2, but with snap1 as
a backing file, so only snap2 is copied.
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT)
reuse existing /path/to/copy (must have empty contents, and format is
probed[*] from the metadata), and copy the full chain
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
reuse existing /path/to/copy (contents must be identical to snap1,
and format is probed[*] from the metadata), and copy only the contents
of snap2
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
reuse existing /path/to/copy (must be raw volume with contents
identical to snap1), and copy only the contents of snap2
Less useful combinations:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
fail if source is not raw, otherwise create /path/to/copy as raw and
the single file is copied (no chain involved)
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
makes little sense: the destination must be raw but have no contents,
meaning that it is an empty file, so there is nothing to reuse
The other three flags are rejected without VIR_DOMAIN_BLOCK_COPY.
[*] Note that probing an existing file for its format can be a security
risk _if_ there is a possibility that the existing file is 'raw', in
which case the guest can manipulate the file to appear like some other
format. But, by virtue of the VIR_DOMAIN_BLOCK_REBASE_COPY_RAW flag,
it is possible to avoid probing of raw files, at which point, probing
of any remaining file type is no longer a security risk.
It would be nice if we could issue an event when pivoting from phase 1
to phase 2, but qemu hasn't implemented that, and we would have to poll
in order to synthesize it ourselves. Meanwhile, qemu will give us a
distinct job info and completion event when we either cancel or pivot
to end the job. Pivoting is accomplished via the new:
virDomainBlockJobAbort(dom, disk, VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT)
Management applications can pre-create the copy with a relative
backing file name, and use the VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT
flag to have qemu reuse the metadata; if the management application
also copies the backing files to a new location, this can be used
to perform live storage migration of an entire backing chain.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_TYPE_COPY):
New block job type.
(virDomainBlockJobAbortFlags, virDomainBlockRebaseFlags): New enums.
* src/libvirt.c (virDomainBlockRebase): Document the new flags,
and implement general restrictions on flag combinations.
(virDomainBlockJobAbort): Document the new flag.
(virDomainSaveFlags, virDomainSnapshotCreateXML)
(virDomainRevertToSnapshot, virDomainDetachDeviceFlags): Document
restrictions.
* include/libvirt/virterror.h (VIR_ERR_BLOCK_COPY_ACTIVE): New
error.
* src/util/virterror.c (virErrorMsg): Define it.
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags
* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.
VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
be opened only if the hypervisor supports
mutually exclusive access to console devices
VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
existing session and force a creation of a
new one.
This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code. The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
When libvirt's virDomainDestroy API is shutting down the qemu process,
it first sends SIGTERM, then waits for 1.6 seconds and, if it sees the
process still there, sends a SIGKILL.
There have been reports that this behavior can lead to data loss
because the guest running in qemu doesn't have time to flush its disk
cache buffers before it's unceremoniously whacked.
This patch maintains that default behavior, but provides a new flag
VIR_DOMAIN_DESTROY_GRACEFUL to alter the behavior. If this flag is set
in the call to virDomainDestroyFlags, SIGKILL will never be sent to
the qemu process; instead, if the timeout is reached and the qemu
process still exists, virDomainDestroy will return an error.
Once this patch is in, the recommended method for applications to call
virDomainDestroyFlags will be with VIR_DOMAIN_DESTROY_GRACEFUL
included. If that fails, then the application can decide if and when
to call virDomainDestroyFlags again without
VIR_DOMAIN_DESTROY_GRACEFUL (to force the issue with SIGKILL).
(Note that this does not address the issue of existing applications
that have not yet been modified to use VIR_DOMAIN_DESTROY_GRACEFUL.
That is a separate patch.)
Qemu is adding the ability to do a partial rebase. That is, given:
base <- intermediate <- current
virDomainBlockPull will produce:
current
but qemu now has the ability to leave base in the chain, to produce:
base <- current
Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags. But in the future, it may be possible to
enhance this API for additional scenarios by using flags:
Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.
Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.
* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.
This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.
* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
- add function headers
- add enum to select metadata to operate on
- export functions
* src/libvirt.c
- add public api implementation
* src/driver.h
- add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
- wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
- add a new error message note that metadata for domain are
missing
We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it. This new API may be used for both.
Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible). Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value. So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.
* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.
The bottom of the public header is reserved for deprecated APIs;
it's nicer to arrange things in logical groups.
* include/libvirt/libvirt.h.in (virConnectSetKeepAlive)
(virDomainGetCPUStats): Float earlier in the file.
add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain. The API is designed to allow
future extensions for additional statistics.
based on ideas by Lai Jiangshan and Eric Blake.
* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)
Signed-off-by: Eric Blake <eblake@redhat.com>
This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
And hook it up for policykit auth. This allows virt-manager to detect
that the user clicked the policykit 'cancel' button and not throw
an 'authentication failed' error message at the user.
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h. It is not an ABI break, since enum values do not
appear as .so entry points. Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.
See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html
* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default. But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.
https://bugzilla.redhat.com/show_bug.cgi?id=767104
* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it. Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.
Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.
The APIs are used to set/get domain's network interface's parameters.
Currently supported parameters are bandwidth settings.
* include/libvirt/libvirt.h.in: new API and parameters definition
* python/generator.py: skip the Python API generation
* src/driver.h: add new entry to the driver structure
* src/libvirt_public.syms: export symbols
A generic error code was returned, if the user aborted a migration job.
This made it hard to distinguish between a user requested abort and an
error that might have occured. This patch introduces a new error code,
which is returned in the specific case of a user abort, while leaving
all other failures with their existing code. This makes it easier to
distinguish between failure while mirgrating and an user requested
abort.
* include/libvirt/virterror.h: - add new error code
* src/util/virterror.c: - add message for the new error code
* src/qemu/qemu_migration.h: - Emit operation aborted error instead of
operation failed, on migration abort
When QEMU guest finishes its shutdown sequence, qemu stops virtual CPUs
and when started with -no-shutdown waits for us to kill it using
SGITERM. Since QEMU is flushing its internal buffers, some time may pass
before QEMU actually dies. We mistakenly used "paused" state (and
events) for this which is quite confusing since users may see a domain
going to pause while they expect it to shutdown. Since we already have
"shutdown" state with "the domain is being shut down" semantics, we
should use it for this state.
However, the state didn't have a corresponding event so I created one
and called its detail as VIR_DOMAIN_EVENT_SHUTDOWN_FINISHED (guest OS
finished its shutdown sequence) with the intent to add
VIR_DOMAIN_EVENT_SHUTDOWN_STARTED in the future if we have a
sufficiently capable guest agent that can notify us when guest OS starts
to shutdown.
This patch adds binding for virNodeGetMemoryStats method of libvirtd.
Return value is represented as a python dictionary mapping field
names to values.
The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.
* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
values
* src/util/virnodesuspend.c: Fix suspend target checks
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).
Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
Given that we can now handle the target's disk shorthand, in addition
to an absolute path to the file or block device used on the host,
the term 'disk' fits a bit better as the parameter name than 'path'.
* include/libvirt/libvirt.h.in: Update some parameter names.
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort)
(virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed)
(virDomainBlockPull): Likewise.
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,
o new clients will not send strings to old servers, based on
a feature check
o new servers will not send strings to old clients without the
flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
the RPC layer in the next patch, so that drivers need not
worry about it in general. The one exception is that
virDomainGetSchedulerParameters lacks a flags argument, so
it must not return a string; drivers that forward that
function on to virDomainGetSchedulerParametersFlags will
have to pay attention to the flag.
o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
based on a feature check (so far, no driver implements it),
so clients do not have to worry about it
Future patches can then enable the feature on a per-driver basis.
This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).
* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
All constants related to events should have a prefix of
VIR_DOMAIN_EVENT_
* include/libvirt/libvirt.h.in, src/qemu/qemu_domain.c:
Rename VIR_DOMAIN_DISK_CHANGE_MISSING_ON_START to
VIR_DOMAIN_EVENT_DISK_CHANGE_MISSING_ON_START
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.
The xml looks like this:
<secret ephemeral='no' private='no'>
<uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
<usage type='ceph'>
<name>mycluster_admin</name>
</usage>
</secret>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
Not all VNC/SPICE servers use a TCP socket for their connections.
It is possible to configure a UNIX socket server. The graphics
event must thus include a UNIX socket address type.
* include/libvirt/libvirt.h.in: Add UNIX socket address type
for graphics event
* src/qemu/qemu_monitor_json.c: Add 'unix' string to address
type enum
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing
* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.
It allows one parameter
uri_aliases = [
"hail=qemu+ssh://root@hail.cloud.example.com/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES
* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
with no scheme
