Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The 'domrename' command needs to check if the new domain name contains
the slash character. This character is not accepted by libvirt XML
definition because it is an invalid char (see Cole's commit b1fc6a7b7).
This commit enhace the 'domrename' command adding this check.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1333232
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virStorageFileSupportsSecurityDriver and
virStorageFileSupportsAccess currently just return a boolean
value. This is ok because they don't have any failure scenarios
but a subsequent patch is going to introduce potential failure
scenario. This changes their return type from a boolean to an
int with values -1, 0, 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageFileGetBackingStoreStr method has overloaded the NULL
return value to indicate both no backing available and a fatal
error dealing with it.
The caller is thus not able to correctly propagate the error
messages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When qemu does not support changing of the backing store string, we'd
reaport that block pull is not supported instead of block commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We store the flags passed to the API which started the migration. Let's
use them instead of a separate bool to check if post-copy migration was
requested.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the flags passed to the API which started QEMU_ASYNC_JOB_DUMP
and we can use them to check whether a memory-only dump is running.
There's no need for a specific bool flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
migrate_cancel QMP command cannot be used for cancelling memory-only
dumps and priv->job.dump_memory_only is used for reporting an error if
someone calls virDomainAbortJob when memory-only dump job is running.
Since commit 150930e309 the dump_memory_only flag is set only if
dump-guest-memory command was called without the detach parameter. This
would incorrectly allow libvirt to send migrate_cancel while the
detached memory-only dump is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When an async job is running, we sometimes need to know how it was
started to distinguish between several types of the job, e.g., post-copy
vs. normal migration. So far we added a specific bool item to
qemuDomainJobObj for such cases, which doesn't scale very well and
storing such bools in status XML would be painful so we didn't do it.
A better approach is to store the flags passed to the API which started
the async job, which can be easily stored in status XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API is renamed as qemuMigrationParamsGetULL and it can be used with
any migration parameter stored as unsigned long long.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use this internal structure only in qemu_migration_params.c and change
other non-test users to use the high level qemuMigrationParams struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By merging qemuMigrationAnyCompressionParse into
qemuMigrationParamsSetCompression we can drop the useless intermediate
qemuMigrationCompression structure and parse compression related typed
parameters and flags directly into qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since every parameter or capability set in qemuMigrationCompression
structure is now reflected in qemuMigrationParams structure, we can
replace qemuMigrationAnyCompressionDump with a new API which will work
on qemuMigrationParams.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call this API explicitly in the migration code. We
can pass the compression parameters to qemuMigrationParamsFromFlags and
it can internally call qemuMigrationParamsSetCompression to apply them
to the qemuMigrationParams structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the calls up the stack to the point where
qemuMigrationParamsFromFlags is called. The end goal achieved in the
following few patches is to merge compression parameters into the
general migration parameters code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every migration entry point in qemu_driver is supposed to call
qemuMigrationParamsFromFlags to transform flags and parameters into
qemuMigrationParams structure and pass the result to qemuMigration*
APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters and capabilities are supposed to be set on
both sides of migration while others should only be set on one side. For
example, CPU throttling parameters make no sense on the destination and
they can be used even if the destination is too old to support them.
To make qemuMigrationParamsFromFlags more general and usable on both
sides of migration, we need to tell it what side it's been called on.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently migration parameters are stored in a structure which mimics
the QEMU migration parameters handled by query-migrate-parameters and
migrate-set-parameters. The new structure will become a libvirt's
abstraction on top of QEMU migration parameters, capabilities, and
related stuff.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will get a bit more complicated soon and storing it on a stack with
{0} initializer will no longer work. We need a proper constructor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our *Free functions usually do not take a double pointer and the caller
has to make sure it doesn't use the stale pointer after the *Free
function returns.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called qemuMigrationParamsFromFlags to better
reflect what it is doing: taking migration flags and params and
producing a struct with QEMU migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.
It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add typedef for the anonymous enum used for the driver features. This
allows the usage of the type in a switch statement and taking
advantage of the compilers feature to detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix this common typo and assign a value rather than implicitly
type-casted comparison result. Introduced by commit b6a264e855.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This partially reverts 82592551cb.
When migrating a domain, qemuMigrationDstPrepareAny() is called
which eventually calls qemuProcessLaunch(conn = NULL, flags =
VIR_QEMU_PROCESS_START_AUTODESTROY); But the very first thing
that qemuProcessLaunch does is check if AUTODESTROY flag is set
and @conn is not NULL. Well, it is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When calling virDomainDefCompatibleDevice to check a new device during
device update, we need to pass the original device which is going to be
updated in addition to the new device. Otherwise, the function can
report false conflicts.
The new argument is currently ignored by virDomainDefCompatibleDevice,
but this will change in the following patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This flag is only used for tests. Let's instead overload bind syscall
in mocks where it is not done yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Host tcp4/tcp6 ports is a global resource thus we need to make
port accounting also global or we have issues described in [1] when
port allocator ranges of different instances are overlapped (which
is by default for qemu for example).
Let's have only one global port allocator object that take care
of the entire ports range (0 - 65535) and introduce port range object
for clients to specify desired auto allocation band.
[1] https://www.redhat.com/archives/libvir-list/2017-December/msg00600.html
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
