The change that made qemu not add the memballoon by default happened
prior to 0.12.0. Additionaly the comment was misleading due to the code
that was added below. Since we always need to add a balloon on the
commandline drop the comment.
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
The watchdog cli refactoring in 4666b762 dropped the temporary variable
we use to convert to action=dump to action=pause for the qemu cli, and
stored the converted value in the domain structure. Our other watchdog
handling code then treated it as though the user requested action=pause,
which broke action=dump handling.
Revive the temporary variable to fix things.
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.
Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
They recently were extracted to a separate function. They don't belong
together though. Since -numa formatting is pretty compact, move it to
the main function and rename qemuBuildNumaCommandLine to
qemuBuildMemoryDeviceCommandLine.
When starting up a VM libvirtd asks numad to place the VM in case of
automatic nodeset. The nodeset would not be passed to the memory device
formatter and the user would get an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269715
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a user specify network type ethernet, then create it via libvirt and run
script if it provided. After this commit user does not need to
run external script to create tap device or add root permissions to qemu
process.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
The end goal is to avoid adding -spice port=0,addr=127.0.0.1 to QEMU command
line when no SPICE port is specified in libvirt XML.
Currently, the code relies on port=xx to always be present, so subsequent
args can be unconditionally appended with a leading ','. Since port=0
will no longer be added in a subsequent commit, we append a ',' to every
arg instead of prepending, and remove the last one before adding it to
the arg list.
Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left
the logic to save/restore the current error essentially doing nothing
in the error path for qemuBuildCommandLine. So move it to where it
was meant to be.
Although the original code would reset the filter on command creation
errors after building the network command portion and commit 'ef2ab8fd'
altered that logic, the teardown is called during qemuProcessStop from
virDomainConfVMNWFilterTeardown and that code has the save/restore
last error logic, so just allow that code to handle the teardown rather
than running it twice. The qemuProcessStop would be called in the failure
path of qemuBuildCommandLine.
Add new function to manage adding the panic device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the NVRAM device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the host device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify qemuBuildPCIHostdevDevStr, qemuBuildUSBHostdevDevStr,
and qemuBuildSCSIHostdevDevStr to use const virDomainDef instead
of virDomainDefPtr.
Make qemuBuildPCIHostdevPCIDevStr and qemuBuildUSBHostdevUSBDevStr
static to the qemu_command.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the redirdev device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also move the qemuBuildRedirdevDevStr closer to the new function and
modify to use the const virDomainDef instead of virDomainDefPtr
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the watchdog device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildWatchdogDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the sound device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since qemuBuildSoundDevStr was only local here, make it static as
well as modifying the const virDomainDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This function can be called over a domain definition that has no
video configured. The
tests/qemuxml2argvdata/qemuxml2argv-minimal.xml file could serve
as an example. Problem is, before the check that domain has some
or none video configured, def->videos is dereferenced causing a
segmentation fault in case there's none video configured.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new function to manage adding the video device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the input device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Make qemuBuildUSBInputDevStr static since only this module calls it.
Also the change to use const virDomainDef forces other changes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify the argument order and types to match other similar helpers.
Also modify called functions to use the def->emulator instead of passing
def->emulator and def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the console device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the channel device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the parallels device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter logic slight to reduce indention level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the serial device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Using const virDomainDef causes collateral damage in other called APIs
which need to make the similar adjustment
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the smartcard device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter the logic slightly to make !nsmartcards check first so that remainder
of the code is less indented.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the network device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -fsdev options to the
command line removing that task from the mainline qemuBuildCommandLine.
Alter the code slightly to perform the !caps and fsdev failure check
up front.
Since both qemuBuildFSStr and qemuBuildFSDevStr are local, make them
static and fix their prototypes to use the const virDomainDef as well.
Make some minor formatting changes for long lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the disk -drive options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since using const virDomainDef in new function, that means other
functions called needed to change their usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the hub -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also make qemuBuildHubDevStr static to the module since it's only
used here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the controller -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also adjust to using const virDomainDef instead of virDomainDefPtr.
This causes collateral damage in order to modify called APIs to use
the const virDomainDef instead as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -global controller options to
the command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the -boot options to the command
line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
