I did a build --without-libvirtd, then ran 'make dist'. The
resulting tarball was broken, with a complaint that make did not
know how to create libvirtd.service.in. I traced it to a use
of EXTRA_DIST inside a conditional.
* daemon/Makefile.am (EXTRA_DIST): Hoist libvirtd.service.in
outside of WITH_LIBVIRTD conditional.
https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl. Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.
* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
Recent work to improve support for loadable driver modules introduced
a regression in the xen driver. The legacy xen driver is now a
stateful, libvirtd driver but was not being registered when building
without driver modules.
A slight behavior change was also noted in the xen drivers when
built as driver modules. Previously, explicitly specifying a
connection URI was not necessary, but now
Compiled against library: libvirt 0.10.0
Using library: libvirt 0.10.0
Using API: QEMU 0.10.0
error: failed to get the hypervisor version
error: internal error Cannot find suitable emulator for x86_64
The xen drivers need to be registered before the qemu driver since
the qemu driver will return success with a null connection URI.
This ordering is safe since the xen drivers will decline when not
running the xen kernel.
REMOTE_PID_FILE is no longer used in the source or the build process but
the man page still used it resulting in no file name being displayed.
The same value that the libvirtd daemon code uses is now used in the man
page.
Currently the man page has paths that start with @sysconfdir@,
@localstatedir@ and @remote_pid_file@. The sed command attempts to
replace these during the build but unfortunately pod2man gets to the
files first and escapes the @ character resulting in the sed not
working. This removes the @ character and makes the paths correct.
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
Update the gendispatch.pl script to get a little closer to
being able to generate code for the LXC monitor, by passing
in the struct prefix separately from the procedure prefix.
Also allow method names using virCapitalLetters instead
of vir_underscore_separator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The copyright dates in the manpages haven't been updated in awhile.
Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.
Believe it or not, there's even a BZ for this:
https://bugzilla.redhat.com/show_bug.cgi?id=819364
When using libnl, use the variables pkg-config provides in case there are
additional libraries or CFLAGS required to build it. Specifically if
the libnl headers are not directly in /usr/include.
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined. Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.
Based on analysis by Osier Yang.
* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
Some of our rules used $(PERL), while others used 'perl'. Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.
* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.
Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.
* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
There was no rule forcing libvirt_qemu_probes.o to be built
before libvirt_qemu_probes.lo was used. Also libvirtd was
still referencing the .o file, rather than the .lo file.
Both the .lo and .o file must be listed as DEPENDENCIES,
otherwise libtool will unhelpfully delete the .o file
once the .lo file is created.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.
To address this, the augeas test cases need to be auto-generated
from the example config files.
* build-aux/augeas-gentest.pl: Helper to generate an
augeas test file, substituting in elements from the
example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
src/locking/test_libvirt_sanlock.aug,
src/locking/test_libvirt_sanlock.aug.in,
src/lxc/test_libvirtd_lxc.aug,
src/lxc/test_libvirtd_lxc.aug.in,
src/qemu/test_libvirtd_qemu.aug,
src/qemu/test_libvirtd_qemu.aug.in: Remove example
config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.
* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
file loading APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.
THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
Commit 4d9e51f6 fixed a 'make uninstall' failure, but failed
to follow other conventions already present in src/Makefile.am.
In particular, we prefer MKDIR_P over mkdir -p, and should
have a matching rmdir during uninstall for every directory
created during install (the idea being that uninstall in a
DESTDIR should be clean, while installation in the final
system should not fail with non-empty directories left behind).
* tools/Makefile.am (install-sysconfig, install-initscript)
(install-systemd): Use MKDIR_P.
(uninstall-sysconfig, uninstall-initscript, uninstall-systemd):
Also remove directories.
* daemon/Makefile.am (install-data-local, install-data-polkit)
(install-logrotate, install-sysconfig, install-sysctl)
(install-init-redhat, install-init-upstart, install-init-systemd)
(install-data-sasl): Use MKDIR_P.
(uninstall-data-polkit, uninstall-sysconfig, uninstall-sysctl)
(uninstall-init-redhat, uninstall-init-upstart)
(uninstall-init-systemd): Also remove directory.
(uninstall-logrotate): New rule.
(uninstall-local): Add uninstall-logrotate.
Make uninstall currently fails with the following message:
rmdir /etc/sasl2/
rmdir: failed to remove `/etc/sasl2/': Directory not empty
That's fine (correct in fact) so force the command to return success
with || :
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.
The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.
Instead of
./configure --with-init-script=redhat
You can now do
./configure --with-init-script=systemd
Or better still:
./configure --with-init-script=systemd+redhat
We can also now support install of the upstart init script
* configure.ac: Add systemd, and systemd+redhat options to
--with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
I missed adding libvirt_driver_remote.la to libvirtd_LDADD in
commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7
libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.
The master probes file is now src/probes.d. This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.
The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.
The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum
The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.
* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
src/util/event_poll.c: Insert probe points, removing any
DEBUG statements that duplicate the info
To avoid static linking libvirtd to the RPC server code, which
then prevents sane introduction of DTrace probes, put it all
in the libvirt.so, and export it
* daemon/Makefile.am: Don't link to RPC libraries
* src/Makefile.am: Link all RPC libraries to libvirt.so
* src/libvirt_private.syms: Export all RPC functions
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk. On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536. Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests). Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit. The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).
* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:
Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.
Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.
Reported by Michal Privoznik
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl
* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:
> * The RPC implementation in libc is obsoleted. Old programs keep working
> but new programs cannot be linked with the routines in libc anymore.
> Programs in need of RPC functionality must be linked against TI-RPC.
> The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
> Visible changes of this change include (obviously) the inability to
> link
> programs using RPC functions without referencing the TI-RPC library,
> the
> removal of the RPC headers from the glibc headers, and the lack of
> symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
> Implemented by Ulrich Drepper.
(from glibc NEWS)
Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.
When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:
/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here
/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here
/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
