Previous commit:
commit 9093ab7734
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 18 17:03:17 2012 +0100
Add lots of internal symbols to libvirt_private.syms
mistakenly put some conditional SASL symbols in libvirt_private.syms
instead of libvirt_sasl.syms
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
To allow for the possibility of vlan "trunks", which have more than
one vlan tag associated with them, we need a vlan struct. Since it
will be used by multiple files in src/util, src/conf, src/network, and
src/qemu, it must be defined in src/util. Unfortunately there isn't
currently a common file for simple netdev data definitions, so I
created a new file.
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetClientPtr constructor will always register
the async IO event handler and the keepalive objects. In the
case of the lock manager, there will be no event loop available
nor keepalive support required. Split this setup out of the
constructor and into separate methods.
The remote driver will enable async IO and keepalives, while
the LXC driver will only enable async IO
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetServerServicePtr is responsible for
creating the virNetServerClientPtr instance when accepting
a new connection. Change this so that the virNetServerServicePtr
merely gives virNetServerPtr a virNetSocketPtr instance. The
virNetServerPtr can then create the virNetServerClientPtr
as it desires
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is desirable to be able to query the config params of
the thread pool, in order to save the server state. Add
virThreadPoolGetMinWorkers, virThreadPoolGetMaxWorkers
and virThreadPoolGetPriorityWorkers APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds three utility functions that operate on
virNetDevVPortProfile objects.
* virNetDevVPortProfileCheckComplete() - verifies that all attributes
required for the type of the given virtport are specified.
* virNetDevVPortProfileCheckNoExtras() - verifies that there are no
attributes specified which are inappropriate for the type of the
given virtport.
* virNetDevVPortProfileMerge3() - merges 3 virtports into a single,
newly allocated virtport. If any attributes are specified in
more than one of the three sources, and do not exactly match,
an error is logged and the function fails.
These new functions depend on new fields in the virNetDevVPortProfile
object that keep track of whether or not each attribute was
specified. Since the higher level parse function doesn't yet set those
fields, these functions are not actually usable yet (but that's okay,
because they also aren't yet used - all of that functionality comes in
a later patch.)
Note that these three functions return 0 on success and -1 on
failure. This may seem odd for the first two Check functions, since
they could also easily return true/false, but since they actually log
an error when the requested condition isn't met (and should result in
a failure of the calling function), I thought 0/-1 was more
appropriate.
The current virRandomBits() API is only usable if the caller wants
a random number in the range [0, n-1) where n is a power of two.
This adds a virRandom() API which generates a double in the
range [0.0,1.0) with 48 bits of entropy. It then also adds a
virRandomInt(uint32_t max) API which generates an unsigned
in the range [0,@max)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt creates invalid commands if wrong locale is selected. For
example with locale that uses comma as a decimal point, JSON commands
created with decimal numbers are invalid because comma separates the
entries in JSON. Fortunately even when decimal point is affected,
thousands grouping is not, because for grouping to be enabled with
*printf, there has to be an apostrophe flag specified (and supported).
This patch adds specific internal function for converting doubles to
strings with C locale.
The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.
The long explanation:
There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.
Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).
When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".
BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.
Boom.
To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This introduces a fairly basic reference counted virObject type
and an associated virClass type, that use atomic operations for
ref counting.
In a global initializer (recommended to be invoked using the
virOnceInit API), a virClass type must be allocated for each
object type. This requires a class name, a "dispose" callback
which will be invoked to free memory associated with the object's
fields, and the size in bytes of the object struct.
eg,
virClassPtr connclass = virClassNew("virConnect",
sizeof(virConnect),
virConnectDispose);
The struct for the object, must include 'virObject' as its
first member
eg
struct _virConnect {
virObject object;
virURIPtr uri;
};
The 'dispose' callback is only responsible for freeing
fields in the object, not the object itself. eg a suitable
impl for the above struct would be
void virConnectDispose(void *obj) {
virConnectPtr conn = obj;
virURIFree(conn->uri);
}
There is no need to reset fields to 'NULL' or '0' in the
dispose callback, since the entire object will be memset
to 0, and the klass pointer & magic integer fields will
be poisoned with 0xDEADBEEF before being free()d
When creating an instance of an object, one needs simply
pass the virClassPtr eg
virConnectPtr conn = virObjectNew(connclass);
if (!conn)
return NULL;
conn->uri = virURIParse("foo:///bar")
Object references can be manipulated with
virObjectRef(conn)
virObjectUnref(conn)
The latter returns a true value, if the object has been
freed (ie its ref count hit zero)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All callers used the same initialization seed (well, the new
viratomictest forgot to look at getpid()); so we might as well
make this value automatic. And while it may feel like we are
giving up functionality, I documented how to get it back in the
unlikely case that you actually need to debug with a fixed
pseudo-random sequence. I left that crippled by default, so
that a stray environment variable doesn't cause a lack of
randomness to become a security issue.
* src/util/virrandom.c (virRandomInitialize): Rename...
(virRandomOnceInit): ...and make static, with one-shot call.
Document how to do fixed-seed debugging.
* src/util/virrandom.h (virRandomInitialize): Drop prototype.
* src/libvirt_private.syms (virrandom.h): Don't export it.
* src/libvirt.c (virInitialize): Adjust caller.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/util/iohelper.c (main): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
* tests/viratomictest.c (mymain): Likewise.
* src/conf/domain_conf.c:
- Add virDomainControllerFind to find controller device by type
and index.
- Add virDomainControllerRemove to remove the controller device
from maintained controler list.
* src/conf/domain_conf.h:
- Declare the two new helpers.
* src/libvirt_private.syms:
- Expose private symbols for the two new helpers.
* src/qemu/qemu_driver.c:
- Support attach/detach controller device persistently
* src/qemu/qemu_hotplug.c:
- Use the two helpers to simplify the codes.
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
Remove the use of a manually run virLogStartup and
virNodeSuspendInitialize methods. Instead make sure they
are automatically run using VIR_ONCE_GLOBAL_INIT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds helpers that validate domain's device configuration.
This will be needed later on to verify devices being hot-plugged to
guests. If the guest has no USB bus, then it's not valid to plug a USB
device to that guest.
The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong
Allow detection of socket close in virNetClient via a callback
function, triggered on any condition that causes the socket to
be closed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make sure that libvirt_private.syms has all the internal symbols
from APIs in src/rpc/*.h and src/util/cgroup.h, since the LXC
controller/driver will shortly need them
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wraps the conversion from 'char *name' to virDomainSnapshotPtr in
a reusable manner.
* src/conf/virdomainlist.h (virDomainListSnapshots): New declaration.
* src/conf/virdomainlist.c (virDomainListSnapshots): Implement it.
* src/libvirt_private.syms (virdomainlist.h): Export it.
Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point. This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.
* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.
This patch adds common code to list domains in fashion used by
virListAllDomains with all currently supported flags. The header file
also contains macros that group filters together that are used to
shorten filter conditions.
Right now, the only way to get at the contents of a virBuffer is
to destroy it. But there are cases in my upcoming patches where
peeking at the contents makes life easier. I suppose this does
open up the potential for bad code to dereference a stale pointer,
by disregarding the docs that the return value is invalid on the
next virBuf operation, but such is life.
* src/util/buf.h (virBufferCurrentContent): New declaration.
* src/util/buf.c (virBufferCurrentContent): Implement it.
* src/libvirt_private.syms (buf.h): Export it.
* tests/virbuftest.c (testBufAutoIndent): Test it.
The goal of this patch is to prepare for support for multiple IP
addresses per interface in the DHCP snooping code.
Move the code for the IP address map that maps interface names to
IP addresses into their own file. Rename the functions on the way
but otherwise leave the code as-is. Initialize this new layer
separately before dependent layers (iplearning, dhcpsnooping)
and shut it down after them.
Add an impl of +virGetUserRuntimeDirectory, virGetUserCacheDirectory
virGetUserConfigDirectory and virGetUserDirectory for Win32 platform.
Also create stubs for non-Win32 platforms which lack getpwuid_r()
In adding these two helpers were added virFileIsAbsPath and
virFileSkipRoot, along with some macros VIR_FILE_DIR_SEPARATOR,
VIR_FILE_DIR_SEPARATOR_S, VIR_FILE_IS_DIR_SEPARATOR,
VIR_FILE_PATH_SEPARATOR, VIR_FILE_PATH_SEPARATOR_S
All this code was adapted from GLib2 under terms of LGPLv2+ license.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist
* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
by test suite
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues
Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):
Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
calls to virDomainEventStateDeregisterConn
Some security drivers require special options to be passed to
the mount system call. Add a security driver API for handling
this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
This value will be needed to set the src_pid when sending netlink
messages to lldpad. It is part of the solution to:
https://bugzilla.redhat.com/show_bug.cgi?id=816465
Note that libnl's port generation algorithm guarantees that the
nl_socket_get_local_port() will always be > 0 (since it is "getpid() +
(n << 22>" where n is always < 1024), so it is okay to cast the
uint32_t to int (thus allowing us to use -1 as an error sentinel).
usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
Add function virJSONValueObjectKeysNumber, virJSONValueObjectGetKey
and virJSONValueObjectGetValue, which allow you to iterate over all
fields of json object: you can get number of fields and then get
name and value, stored in field with that name by index.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
