This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
The option didn't have VSH_OT_INT type even thought it's expected
to be numeric, as shown by the fact that vshCommandOptInt() is later
used to retrieve its value.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
In virsh we have two printing functions: vshPrint() which prints a
string onto stdout and vshPrintExtra() which does not print anything
if virsh is run in quiet mode. Usually, the former is used to print
actual results, while the latter to print strings like table headers
and other formatting stuff. However, in cmdDomIfAddr we have
mistakenly used vshPrintExtra even for actual data. After this patch,
the output should look like the following:
# virsh -q domifaddr test3 --source agent
lo 00:00:00:00:00:00 ipv4 127.0.0.1/8
- - ipv6 ::1/128
ens8 52:54:00:1a:cb:3f ipv6 fe80::5054:ff:fe1a:cb3f/64
virbr0 52:54:00:db:51:e7 ipv4 192.168.122.1/24
virbr0-nic 52:54:00:db:51:e7 N/A N/A
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit 2f36e6944 (re-)introduced a use of an identifier 'interface',
which causes this build failure on mingw:
../../tools/virsh-domain-monitor.c: In function 'cmdDomIfAddr':
../../tools/virsh-domain-monitor.c:2233:17: error: expected identifier or '(' before 'struct'
const char *interface = NULL;
^
See also commit 6512c8b. Sadly, I'm not quite sure how to write a
syntax check that can poison the use of this identifier.
* tools/virsh-domain-monitor.c (cmdDomIfAddr): Use ifacestr instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable holds formatted suffix to each line printed out
(address type, address and prefix). However, the variable is
never freed. At the same time, honour fact, that data held in
the variable is not constant.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure we don't print (null) (which in fact is printf()'s
cleverness anyway, not ours). If no HW address is present, print
"N/A" string just like we do for other fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
A disk using a source pool is listed as having a source '-' in domblklist
because it doesn't check the right XML syntax to find the source.
Add a check for "./source/volume" which is where the "path" (of sorts)
to the volume name is described.
Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.
Signed-off-by: Hao Liu <hliu@redhat.com>
This patch introduces access to allocation information about
a backing chain of a live domain. While querying storage
volumes for read-only disks could provide some of the details,
we do NOT want to read() a file while qemu is writing it.
Also, there is one case where we have to rely on qemu: when
doing a block commit into a backing file, where that file is
stored in qcow2 format on a host block device, we want to know
the current highest write offset into that image, in order to
know if the disk must be resized larger. qemu-img does not
(currently) show this information, and none of the earlier
block APIs were extensible enough to expose it. But
virDomainListGetStats is perfect for the job!
We don't need a new group of statistics, as the existing block
group is sufficient. On the other hand, as existing libvirt
releases already report 1:1 mapping of block.count to <disk>
devices, changing the array size could confuse older clients;
and even with newer clients, the time and memory taken to
report additional statistics is not always necessary (backing
files are generally read-only except for block-commit, so while
read statistics may change, sizing statistics will not). So
the choice here is to add a new flag that only newer callers
will pass, when they are prepared for the additional information.
This patch introduces the new API, but it will take more
patches to get it implemented for qemu.
* include/libvirt/libvirt-domain.h
(VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING): New flag.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document it,
and add a new field when it is in use.
* tools/virsh-domain-monitor.c (cmdDomstats): Use new flag.
* tools/virsh.pod (domstats): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the list of domains is fetched and being printed, but in the
meantime one domain was undefined before its status was fetched, the
output then includes domain with "no state". With this patch, such
domain is skipped over as consecutive 'virsh list --all' (or the same
one ran a second later) wouldn't list it anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add "domstats" command that excercises both of the new APIs depending if
you specify a domain list or not. The output is printed as a key=value
list of the returned parameters.
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use 'virsh list domain --title' option can get domain's title,
not description, the original help information 'show short
domain description' will confuse users, so modify it to
'show domain title'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If user wants to grep some info from domain, e.g. disk paths:
# virsh -q domblklist win7 | awk '{print $2}'
Source
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
while with my change:
# virsh -q domblklist win7 | awk '{print $2}'
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
We don't print table header in other commands, like list.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future. Make this change throughout virsh.
Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.
* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
In a "for" loop there are created two new strings and they may not
be freed if a "target" string cannot be obtained. We have to free
the two created strings to prevent the memory leak.
This has been found by coverity.
John also pointed out that we should somehow care about the "type"
and "device" and Osier agreed to exit with error message if one of
them is set to NULL.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainSetMemoryStatsPeriodFlags() to pass a period defined by
usage of a new --period option in order to set the collection period for the
balloon driver. This may enable or disable the collection based on the value.
Add the --current, --live, & --config options to dommemstat.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed several unusual spacings in for loops, and decided to
fix them up. See the next commit for the syntax check that found
all of these.
* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
The domif-getlink command did not terminate successfully when the
interface state was found. As the code used old and too complex approach
to do the job, this patch refactors it and fixes the bug.
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
