Commit Graph

22 Commits

Author SHA1 Message Date
Pavel Hrdina
e6e26a899d tests: unify qemu binary paths for all qemu related tests
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Michal Privoznik
c4b92f1a8a schema: Don't validate paths
https://bugzilla.redhat.com/show_bug.cgi?id=1353296

On UNIX like systems there are no constraints on what characters
can be in file/dir names (except for NULL, obviously). Moreover,
some values that we think of as paths (e.g. disk source) are not
necessarily paths at all. For instance, some hypervisors take
that as an arbitrary identifier and corresponding file is then
looked up by hypervisor in its table. Instead of trying to fix
our regular expressions (and forgetting to include yet another
character there), lets drop the validation completely.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-08-12 10:59:21 +02:00
Peter Krempa
95f4328e33 tests: schema: Remove useless perf schema data
We have a test case that excercises the parser and formatter now which
takes part in schema checking so remove the schema-only test.
2016-06-17 12:51:08 +02:00
Qiaowei Ren
afe833e9bd perf: add new xml element
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Jim Fehlig
adddaff183 tests: add schema test for default cache mode
None of the existing domXML configs under tests/* specify a
default cache mode since default generally means "use the
hypervisor default" and is left unset by the various hypervisor
drivers. Add a config to tests/domainschemadata that specifies
cache='default'.
2016-03-18 08:48:48 -06:00
Sergey Bronnikov
4076d30f85 docs: Rename 'parallels' to 'vz'
Parallels driver was renamed to Virtuozzo. Replace old name by new
one for libvirt docs and schemas.
2015-08-25 07:21:33 -04:00
Peter Krempa
bffb9163a1 conf: Add support for parsing and formatting max memory and slot count
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
2015-03-23 14:25:14 +01:00
Michal Privoznik
6cc5080a09 RNG: Allow multiple parameters to be passed to an interface filter
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.

Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-11 09:54:29 +01:00
Dmitry Guryanov
c8a6f844c3 add ploop fs driver type
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.

It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2015-01-16 14:07:46 +01:00
Michal Privoznik
742b08e30f qemu: Automatically create NVRAM store
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2014-09-10 09:38:07 +02:00
Cédric Bosdonnat
47e5b5ae32 lxc: allow to keep or drop capabilities
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.
2014-07-23 15:12:37 +08:00
Jiri Denemark
a2e369bc00 conf: Output disk backing store details in domain XML
The XML for quite a longish backing chain is shown below:

  <disk type='network' device='disk'>
    <driver name='qemu' type='qcow2'/>
    <source protocol='nbd' name='bar'>
      <host transport='unix' socket='/var/run/nbdsock'/>
    </source>
    <backingStore type='block' index='1'>
      <format type='qcow2'/>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <backingStore type='file' index='2'>
        <format type='qcow2'/>
        <source file='/tmp/image2.qcow'/>
        <backingStore type='file' index='3'>
          <format type='qcow2'/>
          <source file='/tmp/image3.qcow'/>
          <backingStore type='file' index='4'>
            <format type='qcow2'/>
            <source file='/tmp/image4.qcow'/>
            <backingStore type='file' index='5'>
              <format type='qcow2'/>
              <source file='/tmp/image5.qcow'/>
              <backingStore type='file' index='6'>
                <format type='raw'/>
                <source file='/tmp/Fedora-17-x86_64-Live-KDE.iso'/>
                <backingStore/>
              </backingStore>
            </backingStore>
          </backingStore>
        </backingStore>
      </backingStore>
    </backingStore>
    <target dev='vdb' bus='virtio'/>
  </disk>

Various disk types and formats can be mixed in one chain. The
<backingStore/> empty element marks the end of the backing chain and it
is there mostly for future support of parsing the chain provided by a
user. If it's missing, we are supposed to probe for the rest of the
chain ourselves, otherwise complete chain was provided by the user. The
index attributes of backingStore elements can be used to unambiguously
identify a specific part of the image chain.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-24 16:06:13 +02:00
Daniel P. Berrange
8d4adf3efa Add XML config for resource partitions
Allow VMs to be placed into resource groups using the
following syntax

  <resource>
    <partition>/virtualmachines/production</partition>
  </resource>

A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Dmitry Guryanov
a62116de32 parallels: implement containers creation
Add separate function parallelsCreateCt, which creates container.
Also add example xml configuration domain-parallels-ct-simple.xml.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-09-13 21:19:58 +08:00
Dmitry Guryanov
9700ca82fe parallels: add domain configuration example
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-15 16:39:40 +08:00
Guido Günther
680ac813a5 openvz: support file system quota reporting 2012-05-24 11:35:02 +02:00
Guido Günther
1cbe658bea openvz: read vmguarpages/privvmpages to set memory tunables 2012-05-04 09:09:07 +02:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Peter Krempa
b79ba8382e xml: Add element <title> to allow short description of domains
This patch adds a new element <title> to the domain XML. This attribute
can hold a short title defined by the user to ease the identification of
domains. The title may not contain newlines and should be reasonably short.

 *docs/formatdomain.html.in
 *docs/schemas/domaincommon.rng
        - add schema grammar for the new element and documentation
  *src/conf/domain_conf.c
  *src/conf/domain_conf.h
        - add field to hold the new attribute
        - add code to parse and create XML with the new attribute
2012-02-01 14:41:13 -07:00
Jiri Denemark
38eec464f8 schema: Move timer element inside clock
Both conf/domain_conf.c and domain XML documentation have <timer>
elements inside /domain/clock. Change domain.rng schema to be consistent
with them.
2010-11-09 15:35:43 +01:00
Stefan Berger
a8f75d2c7d vepa: parsing for 802.1Qb{g|h} XML
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().

   <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbg'>
        <parameters managerid='12' typeid='0x123456' typeidversion='1'
         instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
      </virtualport>
      <filterref filter='clean-traffic'/>
    </interface>

    <interface type='direct'>
      <source dev='eth0.100' mode='vepa'/>
      <model type='virtio'/>
      <virtualport type='802.1Qbh'>
        <parameters profileid='my_profile'/>
      </virtualport>
    </interface>

I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.

Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
  as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
 - removing macvtap.h's dependency on domain_conf.h by
   moving the virVirtualPortProfileDef structure into macvtap.h
   and not passing virtDomainNetDefPtr to any functions in
   macvtap.c
- Addressed most of Chris Wright's comments:
  - indicating error in case virtualport XML node cannot be parsed
    properly
  - parsing hex and decimal numbers using virStrToLong_ui() with
    parameter '0' for base
  - tgifname (target interface name) variable wasn't necessary
    to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
  only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
  in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
  will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
  file for subsequent patches to easier make them generally available
  for export
- passing the macvtap interface name rather than the link device since
  this otherwise gives funny side effects when using netlink messages
  where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
  all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
  we wanted to use hook scripts for the setup and so the setup doesn't fail
  here.
- if instance ID UUID is not supplied it will automatically be generated
  - adapted schema to make instance ID UUID optional
  - added test case
- parser and XML generator have been separated into their own
  functions so they can be re-used elsewhere (passthrough case
  for example)
- Adapted XML parser and generator support the above shown type
  (802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
  802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
  necessary to use (for SR-IOV)
2010-05-25 17:37:00 -04:00
Daniel P. Berrange
a7600746fb Support for container related domain XML extensions 2008-08-01 13:31:37 +00:00