Commit c9027d8f added a detection of NIC HW features, but some of them
are not available in old kernel. Very old kernels lack enum
ethtool_flags and even if this enum is present, not all values are
available for all kernels. To be sure that we have everything in kernel
that we need, we must check for existence of most of that flags, because
only few of them were defined at first.
Also to successfully build libvirt with older kernel we need to include
<linux/types.h> before <linux/ethtool.h> to have __u32 and friends
defined.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.
Coverity complains that "net_set" is compared to NULL before calling
xen_network_set_free, but used rather liberally before that. While
I was looking at the code I also noted that if the virAsprintfQuiet
fails, then we leak our structures - so I added those too.
Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference
Since inception. Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
$ virsh iothread --help
NAME
iothreadpin - control domain IOThread affinity
SYNOPSIS
iothreadpin <domain> <iothread> <cpulist> [--config] [--live] [--current]
DESCRIPTION
Pin domain IOThreads to host physical CPUs.
OPTIONS
[--domain] <string> domain name, id or uuid
[--iothread] <number> IOThread ID number
[--cpulist] <string> host cpu number(s) to set
--config affect next boot
--live affect running domain
--current affect current domain
Using the output from iothreadsinfo, allow changing the pinned CPUs for
a single IOThread.
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadpin $dom 3 0-2
Then view the change
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-2
If an invalid value is supplied or require option missing,
then an error will be displayed:
$ virsh iothreadpin $dom 4 3
error: invalid argument: iothread value out of range 4 > 3
$ virsh iothreadpin $dom 3
error: command 'iothreadpin' requires <cpulist> option
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every API that touches internal structure of the object must lock
the object first. Not every API that has the object as an
argument needs to do that though. Some APIs just pass the object
to lower layers which, however, must lock the object then. Look
at the code, you'll get my meaning soon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Later we can turn APIs to lock the object if needed instead of
relying on caller to mutually exclude itself (probably done by
locking a big lock anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new single function instead of calling
qemuMonitorJSONGetBlockStatsInfo and
qemuMonitorJSONGetBlockStatsParamsNumber. This will allow to delete the
functions later while still maintaining coverage.
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
In the LXC driver, if the disk path is not provided the API returns
total statistics for all disks of the domain. With the new text monitor
implementation this can be now done in the qemu driver too.
Add code that wil total the stats for all disks if the path is not
provided.
Extract the code to look up the disk alias and return the block stats
struct so that it can be reused later in qemuDomainBlockStatsFlags.
The function uses qemuMonitorGetAllBlockStatsInfo instead of
qemuMonitorGetBlockStatsInfo.
Our virDomainBlockStatsFlags API uses the old approach where, when it's
called without the typed parameter array, returns the count of parameters
supported by qemu.
The supported parameter count is obtained via separate monitor calls
which is a waste since we can calculate it when gathering the data.
This patch adds code to the qemuMonitorGetAllBlockStatsInfo workers that
allows to track the count of supported fields reported by qemu and will
allow to remove the old duplicate code.
The function that is extracting block stats data from the QMP monitor
reply contains a lot of repeated code. Since I'd be changing each of the
copies in the next patch, lets convert it to a macro right away.
Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.
This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.
The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.
qemu HMP commands sent by libvirt are terminated just by a '\r'. The
fake monitor used in tests wasn't prepared to handle this and the
communication would hang on an attempt to do a HMP conversation.
Add a special case for handling commands separated by \r in case HMP is
used.
Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.
The flaw was introduced in commit feb1a4d792.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:
==24845== Thread #14's call to pthread_mutex_destroy failed
==24845== with error code 16 (EBUSY: Device or resource busy)
==24845== at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845== by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845== by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845== by 0x5302A89: virObjectUnref (virobject.c:265)
==24845== by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845== by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845== by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845== by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845== by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845== by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845== by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845== by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
in virDomainFSInfoFree(), don't free the virDomainFSInfo data.
==10670== 80 bytes in 2 blocks are definitely lost in loss record 576 of 793
==10670== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==10670== by 0x509DEBD: virAlloc (viralloc.c:144)
==10670== by 0x19FBD558: qemuAgentGetFSInfo (qemu_agent.c:1837)
==10670== by 0x1A03CF91: qemuDomainGetFSInfo (qemu_driver.c:19238)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:
Unable to open control socket: Operation not permitted
To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
As of bba93d40 all of our RPC objects are derived from
virObjectLockable. However, during rewrite some errors sneaked
in. For instance, the dispose functions to virNetClient and
virNetServerClient objects were not only freeing allocated
memory, but unlocking themselves. This is wrong. Object should
never disappear while locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
