The support for the sheepdog storage backend will be dropped in the
upcoming patches. Remove all the relevant tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QCOW2 images now support 'extended_l2' which splits the default clusters
into 32 subcluster allocation units. This allows the allocation units to
be smaller without increasing the size of L2 table too much and thus also
the cache requirements for holding the full L2 table in memory.
Unfortunately it's incompatible with qemu versions older than 5.2 thus
can't be used as default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default value hard-coded in QEMU (64KiB) is not always the ideal.
Having a possibility to set the cluster_size by user may in specific
use-cases improve performance for QCOW2 images.
QEMU internally has some limits, the value has to be between 512B and
2048KiB and must by power of two, except when the image has Extended L2
Entries the minimal value has to be 16KiB.
Since qemu-img ensures the value is correct and the limit is not always
the same libvirt will not duplicate any of these checks as the error
message from qemu-img is good enough:
Cluster size must be a power of two between 512 and 2048k
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/154
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If there are no source extents the volume XML has an empty <source>
element. Remove it if there's nothing in it by using
virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The storage driver was wired up to support creating raw volumes in LUKS
format, but was never adapted to support LUKS-in-qcow2. This is trivial
as it merely requires the encryption properties to be prefixed with
the "encrypt." prefix, and "encrypt.format=luks" when creating the
volume.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1526382
Since commit c4eedd793 disallowed qcow2 encrypted images to be
used for domains, it no longer makes sense to allow a qcow2
encrypted volume to be created or resized.
Add a test that will exhibit the failure of creation as well
as the xml2xml validation of the format still being correct.
Update the documentation to note the removal of the capability
to create and use qcow/default encrypted volumes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
We're about to disallow creation of a qcow2 encrypted storage
volume, so let's remove the qcow encryption element from the
tests which are testing whether other format='qcow2' related
features work properly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.
Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The XML parser sets a default <mode> if none is explicitly passed in.
This is then used at pool/vol creation time, and unconditionally reported
in the XML.
The problem with this approach is that it's impossible for other code
to determine if the user explicitly requested a storage mode. There
are some cases where we want to make this distinction, but we currently
can't.
Handle <mode> parsing like we handle <owner>/<group>: if no value is
passed in, set it to -1, and adjust the internal consumers to handle
it.
In virStorageVolCreateXML, add VIR_VOL_XML_PARSE_NO_CAPACITY
to the call parsing the XML of the new volume to make the capacity
optional.
If the capacity is omitted, use the capacity of the old volume.
We already do that for values that are less than the original
volume capacity.
Volume and pool formatting functions took different approaches to
unspecified uids/gids. When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better). Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.
RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add file in storagevolxml2xmlin and storagevolxml2xmlout, let
storagevolxml2xmltest and storagevolschematest cover 'nocow'.
Add test case to storagevolxml2argvtest to cover 'nocow'.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly. Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:
<volume type='...'>
...
</volume>
* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reuse the XML files in storagevolxml2xmlin.
(This requires changing a few backing files to /dev/null,
since virStorageBackendCreateQemuImgCmd checks for its
presence)
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
