Since this function is now only called when an 'acceleration' element is
present in the xml, any failure to parse the element will be considered
an error.
Previously, we detected some types of errors, but we would only log an
error (virReportError()), but still return a partially-specified accel
object to the caller. This patch returns NULL for all parsing errors and
reports that error back up to the caller.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The current code doesn't properly handle errors when parsing a video
device's resolution. We were returning a NULL structure for the case
where 'x' or 'y' were missing. But for the other error cases, we were
logging an error (virReportError()), but still returning an
under-specified structure. That under-specified structure was used by
the calling function rather than properly reporting an error.
This patch changes the parse function to return NULL on any parsing
error and changes the calling function to report an error when NULL is
returned.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Previously, we were passing the video "model" node to the "acceleration"
and "resolution" parsing functions and requiring them to iterate over
the children to discover and parse the appropriate node. It makes more
sense to move this responsibility up to the parent function and just
pass these functions the node that needs to be parsed.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
As suggested by Cole, this patch uses the domain capabilities to
validate the supported video model types. This allows us to remove the
model type validation from qemu_process.c and qemu_domain.c and
consolidates it all in a single place that will automatically adjust
when new domain capabilities are added.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Declare the capabilities as enum values and store them in an array. This
makes adding new features more straightforward and simplifies the
formatter which now doesn't require changing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For future extensions of the domain caps it's useful to have a single
point that initializes all capabilities as unsupported by a driver. The
driver then can enable specific ones.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract it to virDomainCapsFormatFeatures so that the main function does
not get so bloated over time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainCapsFeatureFormatSimple which does exactly the same
thing but it's a function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A function virStringParseYesNo was added to convert
string 'yes' to true and 'no' to false, so use this
helper to replace 'STREQ(.*, \"yes\")' and
'STREQ(.*, \"no\")' as it allows us to drop several
repetitive if-then-else string->bool conversion blocks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This helper performs a conversion from a "yes|no" string
to a corresponding boolean, and several conversions were
already done, but there are still some omissions.
For most of the remaining usages in domain_conf.c only
"yes" is explicitly checked for. This means all other
values are implicitly handled as 'false'. In this case,
use virStringParseYesNo to handle the conversion and
reserve the original logic of not raise an error, so
ignore the return value of helper.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
In preparation for some other improvements, switch to using glib
allocation and g_autofree when parsing the 'acceleration' and
'resolution' properties of the video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Just above in the function, we return from the function if either x or y
are NULL, so there's no need to re-check whether x or y are NULL.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit 72862797 introduced resolution settings for QEMU video drivers.
It includes a new structure inside video definition. So, the code needs
to clear pointer allocation for that structure into clear function
virDomainVideoDefClear(). This commit adds this missing VIR_FREE().
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need to pass around strings and switch to the enum values
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities are declared in the XML schema so passing feature names
as strings from hypervisor drivers makes no sense.
Additionally some of the features expose so called 'toggles' while
others not. This knowledge was encoded by a bunch of 'STREQ's in the
formatter.
Change all of this by declaring the features as an enum and use it
instead of a dynamically allocated array.
Presence of 'toggles' is encoded together with the conversion strings
rather than in the formatter directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement and the automatic memory handlers to simplfy the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use automatic memory freeing and use virXMLFormatElement instead of open
coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code formatting storage capabilities faithfully copied the wrong use
of 'const' from domain capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
'virBlahPtr const blah' results into modification to the value of 'blah'
triggering compilation error rather than the modification of the virBlah
struct the pointer points to.
All of the domain capability formatting code was broken in this regard.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 17561eb36 modified the logic to check "if (!event)" for an
attribute that was not supposed to be passed as NULL. This causes
the static checker/Coverity build to fail. Since the check is made,
alter the header.
Also add an error message since returning -1 without some sort of
error message as previously would have happened with the failed
VIR_STRDUP so that the eventual error doesn't get the default
for some reason message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the conversion of all callers that would pass true as @dynamic to
a different function we can remove the unused argument now.
Additionally modify the return type to 'size_t' as indentation can't be
negative and remove checks whether @buf is passed as it's caller's duty
to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we are updating the current checkpoint when redefining by mentioning
the current checkpoint as a parent of the newly redefined one we don't
have to clear it first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no point in clearing the current checkpoint when we are just
changing the definition of the current checkpoint as by the virtue of the
'update_current' flag the same checkpoint would become current in
qemuCheckpointCreateXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'other' variable was used to store the parent of the redefined
checkpoint and then the existing version of the currently redefined
checkpoint. Make it less confusing by adding a 'parent' variable for the
first case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no point in clearing the current snapshot when we are just
changing the definition of the current snapshot as by the virtue of the
'update_current' flag the same snapshot would become current in
qemuDomainSnapshotCreateXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In domain_conf.c we have virDomainSCSIDriveAddressIsUsed()
function which returns true or false if given drive address is
already in use for given domain config or not. However, it also
takes a shortcut and returns true (meaning address in use) if the
unit number equals 7. This is because for some controllers this
is reserved address. The limitation comes mostly from vmware and
applies to lsilogic, buslogic, spapr-vscsi and vmpvscsi models.
On the other hand, we were not checking for the maximum unit
number (aka LUN number) which is also relevant and differs from
model to model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new type virHashDataFreeSimple which has only a void * as
argument for cases when knowing the name of the entry when freeing the
hash entry is not required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Previous commit removed last use of this function so we can get rid of
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a simpler replacement for virDomainDiskByName when looking up
by disk target.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.
Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some places we need to check if a hostdev has VFIO backend.
Because of how complicated virDomainHostdevDef structure is, the
check consists of three lines. Move them to a function and
replace all checks with the function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a temporary variable to allow copying from the
currently set source.
Always return 0 since none of the callers distinguishes
between 0 and 1 propagated from VIR_STRDUP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Back in July 2009, in the days before libvirt supported explicitly
assigning a PCI address to every device, code was added to save the
PCI addresses of hotplugged network, disk, and hostdevs in the domain
status with this XML element:
<state devaddr='domain🚌slot'/>
This was added in commits 4e21a95a, 01654107, in v0.7.0, and 0c5b7b93
in v0.7.1.
Then just a few months later, in November 2009, The code that actually
formatted the "devaddr='blah'" into the status XML was removed by
commit 1b0cce7d3 (which "introduced a standardized data structure for
device addresses"). The code to *parse* the devaddr from the status
was left in for backward compatibility though (it just parses it into
the "standard" PCI address).
At the time the devaddr attribute was added, a few other attributes
already existed in the <state> element for network devices, and these
were removed over time (I haven't checked the exact dates of this),
but 10 years later, in libvirt v5.8.0, we *still* maintain code to
parse <state devaddr='blah'/> from the domain status.
In the meantime, even distros so old that we no longer support them in
upstream libvirt are using a libvirt new enough that it doesn't ever
write <state devaddr='blah'/> to the domain status XML.
Since the only way a current libvirt would ever encounter this element
would be if someone was upgrading directly from libvirt <= v0.7.5 with
running guests, it seems safe to finally remove the code that parses it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we no longer use any of the macros from this file, remove it.
This also removes a typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt currently uses the VIR_AUTOUNREF macro for auto cleanup of
virObject instances. GLib approaches things differently with GObject,
reusing their g_autoptr() concept.
This introduces support for g_autoptr() with virObject, to facilitate
the conversion to GObject.
Only virObject classes which are currently used with VIR_AUTOREF are
updated. Any others should be converted to GObject before introducing
use of autocleanup.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It is the only user. Rename it to match the local style
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reverts commit 2d8721e260.
This fix was both incomplete and too general. It only fixed domain
startup, but libvirt would still report empty list of supported CPU
models with recent QEMU for ppc64. On the other hand, while ppc64 QEMU
ignores case when looking up CPU model names, x86_64 QEMU does case
sensitive lookup. Without reverting this patch, libvirt could happily
accept CPU model names which are not supported by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implement an XML to virCPUDefPtr helper that handles the ctxt
prerequisite for virCPUDefParseXML.
This does not alter any functionality.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Message-Id: <1568924706-2311-14-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'vm' is passed in which contains the definition which contains the UUID
so we don't need another parameter for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'vm' is passed in which contains the definition which contains the UUID
so we don't need another parameter for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before the refactoring that properly separated the network driver from
the hypervisor driver and forced all interaction to go through public
APIs, all network usage counters were zeroed when the network driver
was initialized, and the network driver's now-deprecated
"semi-private" API networkNotifyActualDevice() was called for every
interface of every domain as each hypervisor "reconnected" its domains
during a libvirtd restart, and this would refresh the usage count for
each network.
Post-driver-split, during libvirtd restart/reconnection of the running
domains, the function virDomainNetNotifyActualDevice() is called by
each hypervisor driver for every interface of every domain restart,
and this function has code to re-register interfaces, but it only
calls into the network driver to re-register those ports that don't
already have a valid portid (ie. one that is not simply all 0),
assuming that those with valid portids are already known (and counted)
by the network driver.
commit 7ab9bdd47 recently modified the network driver so that, in most
cases, it properly resyncs each network's connection count during
libvirtd (or maybe virtnetworkd) restart by iterating through the
network's port list. This doesn't account for the case where a network
is destroyed and restarted while there are running domains that have
active ports on the network. In that case, the entire port list and
connection count for that network is lost, and now even a restart of
libvirtd/virtnetworkd/virtqemud, which in the past would resync the
connection count, doesn't help (the network driver thinks there are no
active ports, while the hypervisor driver knows about all the active
ports, but mistakenly believes that the network driver also knows).
The solution to this is to not just bypass valid portids during the
call to virDomainNetworkNotifyActualDevice(). Instead, we query the
network driver about the portid that was preserved in the domain
status, and if it is not registered, we register it.
(NB: while it would technically be correct to just generate a new
portid for these cases, it makes for less churn in portids (and thus
may make troubleshooting simpler) if we make the small fix to
virDomainNetDefActualToNetworkPort() that preserves existing valid
portids rather than unconditionally generating a new one.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The private data for video definition is created in
virDomainVideoDefNew() and we attempt to free it in
virDomainVideoDefFree(). This seems to work, except
the free function calls clear function which zeroes
out the whole structure and thus virObjectUnref()
which is called on private data does nothing.
2,568 bytes in 107 blocks are definitely lost in loss record 207 of 213
at 0x4A35476: calloc (vg_replace_malloc.c:752)
by 0x50A6048: virAllocVar (viralloc.c:346)
by 0x513CC5A: virObjectNew (virobject.c:243)
by 0x4DC1DEE: qemuDomainVideoPrivateNew (qemu_domain.c:1337)
by 0x51A6BD6: virDomainVideoDefNew (domain_conf.c:2831)
by 0x51B9F06: virDomainVideoDefParseXML (domain_conf.c:15541)
by 0x51CB761: virDomainDefParseXML (domain_conf.c:21158)
by 0x51C5973: virDomainDefParseNode (domain_conf.c:21708)
by 0x51C583A: virDomainDefParse (domain_conf.c:21663)
by 0x51C58AE: virDomainDefParseFile (domain_conf.c:21688)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In bc1e924cf0 we've introduced video driver name and whilst
doing so we've utilized VIR_ENUM_IMPL() macro. Then, in domain
XML parsing code the generated
virDomainVideoBackendTypeFromString() is called and its return
value is assigned directly to an unsigned int variable which is
wrong. Also, the video driver enum has 'default' value which is
not formatted into domain XML but is accepted during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the bridge re-attach handling was moved out of the network driver
and into the hypervisor driver (commit b806a60e) as a part of the
refactor to split the network driver into a separate daemon, the check
was accidentally changed to only check for type='bridge'. The check for
type in this case needs to check for type='network' as well.
(at the time we thought that the two types could be conflated for
interface actual type, but this turned out to be too problematic to
do).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When registering new callback for an event, the event loop timer
must be created and registered. The timer has domain event state
object as an opaque argument which must be ref()-ed but only if
the timer was being created and registered successfully. We must
not ref it every time the virObjectEventStateRegisterID() runs.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use VIR_AUTO* for temporary locals and get rid of the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use VIR_AUTOPTR for temporary locals and get rid of the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor functions using these two object types together with
VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up functions which grab and free the context to use VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use VIR_AUTO* helpers to get rid of the convoluted cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add automatic cleanup for variables of xmlDoc and xmlXPathContext type
to remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper reports libvirt errors for the libxml2 function so that
the same does not have to be repeated over and over.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It needs to be used by a function that only has a const pointer to
virDomainNetDef.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the introduction of the virNetworkPort object, the network driver
has a persistent record of ports that have been created against the
networks. Thus the hypervisor drivers no longer communicate to the
network driver during libvirtd restart.
This change, however, meant that the connection usage counts were
no longer re-initialized during a libvirtd restart. To deal with this we
must iterate over all virNetworkPortDefPtr objects we have and invoke
the notify callback to record the connection usage count.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkPortDef config stores the 'managed' attribute
as the virTristateBool type.
The virDomainDef config stores the 'managed' attribute as
the bool type.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the hypervisor driver has not yet created the network port, the
portid field will be "00000000-0000-0000-0000-000000000000".
If a failure occurs during early VM startup, the hypervisor driver may
none the less try to release the network port, resulting in an
undesirable warning:
2019-09-12 13:17:42.349+0000: 16544: error :
virNetworkObjLookupPort:1679 : network port not found: Network port with
UUID 00000000-0000-0000-0000-000000000000 does not exist
By checking if the portid UUID is valid, we can avoid polluting the logs
in this way.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The pci_dev->physical_function is rewritten in
virPCIGetPhysicalFunction() to a newly allocated pointer.
Therefore, we must free the old one to avoid memleak.
Signed-off-by: Jiang kun <jiang.kun2@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The snapshot-create operation of running guests saves the live
XML and uses it to replace the active and inactive domain in
case of revert. So, the config XML is ignored by the snapshot
process. This commit changes it and adds the config XML in the
snapshot XML as the <inactiveDomain> entry.
In case of offline guest, the behavior remains the same and the
config XML is saved in the snapshot XML as <domain> entry. The
behavior of older snapshots of running guests, that don't have
the new <inactiveDomain>, remains the same too. The revert, in
this case, overrides both active and inactive domain with the
<domain> entry. So, the <inactiveDomain> in the snapshot XML is
not required to snapshot work, but it's useful to preserve the
config XML of running guests.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function virDomainDefFormatInternal() has the predefined root name
"domain" to format the XML. But to save both active and inactive domain
in the snapshot XML, the new root name "inactiveDomain" was created.
So, the new function virDomainDefFormatInternalSetRootName() allows to
choose the root name of XML. The former function became a tiny wrapper
to call the new function setting the correct parameters.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The only caller for which this check makes sense is virDomainDefParse.
Thus the check should be moved there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will simplify addition of another attribute to the <target> element
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
- qemuProcessReconnectAll()
- libxlReconnectDomains()
The rest seem to be safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
https://bugzilla.redhat.com/show_bug.cgi?id=1720612
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In near future the storage pool object lock will be released
during startPool and buildPool callback (in some backends). But
this means that another thread may acquire the pool object lock
and change its definition rendering the former thread access not
only stale definition but also access freed memory
(virStoragePoolObjAssignDef() will free old def when setting a
new one).
One way out of this would be to have the pool appear as active
because our code deals with obj->def and obj->newdef just fine.
But we can't declare a pool as active if it's not started or
still building up. Therefore, have a boolean flag that is very
similar and forces virStoragePoolObjAssignDef() to store new
definition in obj->newdef even for an inactive pool. In turn, we
have to move the definition to correct place when unsetting the
flag. But that's as easy as calling
virStoragePoolUpdateInactive().
Technically speaking, change made to
storageDriverAutostartCallback() is not needed because until
storage driver is initialized no storage API can run therefore
there can't be anyone wanting to change the pool's definition.
But I'm doing the change there for consistency anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag can be used to denote that the definition we're trying
to assign to a pool object is live definition and thus the
inactive definition should be saved into ->newDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate storage pool definition assignment into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There will be more boolean information that we want to pass to
this function. Instead of having them in separate arguments per
each one, use @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is doing much more than plain assigning pool
definition to a pool object. Rename it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out there's one callback that might remove a storage pool
during its run: storagePoolUpdateAllState() call
storagePoolUpdateStateCallback() which may call
virStoragePoolUpdateInactive() which in turn may call
virStoragePoolObjRemove(). Problem is that the
UpdateStateCallback() sees a storage pool object with just two
references: one for each hash table holding the object. If the
function ends up calling ObjRemove() then upon removing the
object from hash tables those references are gone and thus any
subsequent call touching the object is invalid.
The solution to this problem is to grab reference for the object
we are running iterator with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we're removing a pool object from the list of pools
doesn't mean we want to unlock it. It violates locking policy
too as object locking and unlocking is not done on the same
level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In the future we will perform more actions if ns.parse
is present. Decouple the condition from the actual call.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We do not need to pass the root node, since it's already
included in the XPathContext.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.
But resctrl is improperly freed when sharing happens.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Gnulib has added a patch that allows configmake.h to be included
without causing build failures on mingw if <winsock2.h> is later
included (whether directly, or indirectly such as through gnulib's
<unistd.h>).
This reverts commit fed58d83c6 ("build:
Fix checkpoint_conf on mingw"), now that we don't have to worry about
header inclusion ordering issues.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only code path which calls the parser with the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE is from qemuDomainBlockCopy. Since that
code path can properly handle backing chains for the disk and it's
desired to pass the parsed chains to the block copy code remove the
condition which prevents parsing the <backingStore> element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.
Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338
This reverts commit 94b3aa55f8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since its introduction in commit
8737578d11, the TPM version format is
"2.0" and not "2".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general snapshot and checkpoint APIs were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefParseNode.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit fed58d83 was a hack to fix a mingw build failure due to header
inclusion order resulting in a clash over the use of DATADIR,
repeating a trick made several other times in the past. Better is to
revert that, and instead use pragmas to avoid the clash in the first
place, regardless of header ordering, solving it for everyone.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver already does some <rng> model validation, based on
qemuCaps. However, the logic for exposing <rng> model values in domcaps
is basically identical. This drops the qemuCaps checking and compares
against the domCaps data directly.
This approach makes it basically impossible to add a new <rng> model to
the qemu driver without extending domcaps. The validation can also
be shared with other drivers eventually.
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is an entrypoint to validate a virDomainDeviceDef against
values filled into virDomainCaps.
Currently it's just a stub
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Current code doesn't allow us to add sub-features as we always print the
closing '/>'. As a preparatory change to implementing 'direct' sub-feature
for 'stimer' feature switch to printing closing tag individually.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new algorithm for detecting the vcpus and monitor type conflicts
between new monitor an existing allocation and monitor groups.
After refactoring, since we are verifying both @vcpus and monitor
type @tag at the same time, the validating function name has been
renamed from virDomainResctrlMonValidateVcpus to
virDomainResctrlValidateMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virResctrlAllocIsEmpty' checks if cache allocation or memory
bandwidth allocation settings are specified in configuration
file. It is not proper to be used in checking memory bandwidth
allocation is specified in XML settings because this function
could not distinguish memory bandwidth allocations from cache
allocations.
Here using the local variable @n, which indicates the cache
allocation groups or memory bandwidth groups depending on the
context it is in, to decide if append a new @resctrl object.
If @n is zero and no monitors groups specified in XML, then
we should not append a new @resctrl object to @def->resctrls.
This kind of replacement is also more efficient and avoiding
a long function calling path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let 'virDomainResctrlVcpuMatch' to retrieve a pointer of
virDomainResctrlDefPtr in its third parameter instead
of virResctrlAllocPtr, if @vcpus is matched with the vcpus
of some resctrl allocation in list of @def->resctrls.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Creating object and judging if it is successfully created in fewer
lines.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
code cleanup for 'virDomainCachetuneDefParse' and
'virDomainMemorytuneDefParse'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CI flagged a failing mingw build, due to:
In file included from ../../src/conf/checkpoint_conf.c:24:
../gnulib/lib/configmake.h:8:17: error: expected identifier or '(' before string constant
8 | #define DATADIR "/usr/i686-w64-mingw32/sys-root/mingw/share"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As previously learned in commits bd205a90 and 976abdf6, gnulib's
configmake.h header does #define DATADIR "string...", while mingw's
<winsock2.h> expects to declare a type named DATADIR. As long as the
mingw system header is included first before configmake.h, the two
uses do not conflict, but until gnulib is patched to make configmake.h
automatically work around the issue, our immediate fix is the
workaround of rearranging our include order to insure no conflict.
Copy the paradigm used in domain_conf.c of using <unistd.h> to trigger
the indirect inclusion of <winsock2.h> on mingw.
Fixes: 1a4df34a
Signed-off-by: Eric Blake <eblake@redhat.com>
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list. This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new file for managing a list of checkpoint objects, borrowing
heavily from existing virDomainSnapshotObjList paradigms.
Note that while snapshots definitely have a use case for multiple
children to a single parent (create a base snapshot, create a child
snapshot, revert to the base, then create another child snapshot),
it's harder to predict how checkpoints will play out with reverting to
prior points in time. Thus, in initial use, given a list of
checkpoints, you never have more than one child, and we can treat the
most-recent leaf node as the parent of the next node creation, without
having to expose a notion of a current node in XML or public API.
However, as the snapshot machinery is already generic, it is easier to
reuse the generic machinery that tracks relations between domain
moments than it is to open-code a new list-management scheme just for
checkpoints (hence, we still have internal functions related to a
current checkpoint, even though that has no observable effect
externally, as well as the addition of a function to easily find the
lone leaf in the list to use as the current checkpoint).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.
Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag. We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch). But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema. If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.
Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we are checking the 2nd parameter in the function for NULL,
we need to remove ATTRIBUTE_NONNULL(2) from the prototype.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Message-Id: <20190726205633.2041912-5-stefanb@linux.vnet.ibm.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using the ENUM macros, the compiler guards that the declaration
and implementation are in sync.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot. Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list. The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).
Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests will need to parse such a definition so it also needs to be freed.
Provide a function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 035db37394
Even though we only allow using RBD with raw volumes,
removing the options and the default format causes our
parser not to fill out the volume format and the backend code
rejects creating a non-raw volume.
Re-introduce the volume options to fix volume creation while
erroring out on requests to use non-raw formats.
https://bugzilla.redhat.com/show_bug.cgi?id=1724065
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The cleanup label in virNetworkObjDeletePort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The cleanup label in virNetworkObjAddPort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virNetworkObjGetPortStatusDir() function allocates a memory
to construct a path. None of the callers free it leading to a
memleak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nwfilter/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nwfilter/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nodedev/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nodedev/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/storage/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/storage/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Similar to VIR_DOMAIN_DEF_PARSE_VALIDATE_SCHEMA; the next patch will
put it to use with a counterpart public API flag.
No need to change qemudomainsnapshotxml2xmltest to use the flag, since
the testsuite already has a separate virschematest that does the same.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>