Replace all uses where virBuffer would need clearing on the cleanup
path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Although VIR_DOMAIN_DEF_FORMAT_INACTIVE and VIR_DOMAIN_XML_INACTIVE
happen to have the same value (1<<1), they come from different enums;
and it is nicer to reason about a 'flags' variable if all uses of
that variable are compared against the same enum type. Messed up in
commit 06f75ff2 (3.8.0).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple QEMU processes for QMP commands can operate concurrently.
Use a unique directory under libDir for each QEMU process to avoid
pidfile and unix socket collision between processes.
The pid file name is changed from "capabilities.pidfile" to "qmp.pid"
because we no longer need to avoid a possible clash with a qemu domain
called "capabilities" now that the processes artifacts are stored in
their own unique temporary directories.
"Capabilities" was changed to "qmp" in the pid file name because these
processes are no longer specific to the capabilities usecase and are
more generic in terms of being used for any general purpose QMP message
exchanges with a QEMU process that is not associated with a domain.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users qemuProcessQMP struct were always forced to call both
qemuProcessQMPStop and qemuProcessQMPFree when they are done with the
process. We can just call qemuProcessQMPStop from qemuProcessQMPFree and
let users call qemuProcessQMPFree only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPNew is one of the public functions used to create and
manage a QEMU process for QMP command exchanges outside of domain
operations.
Add descriptive comment block, debug statement and make source
consistent with the cleanup / VIR_STEAL_PTR format used elsewhere.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The monitor config data is removed from the qemuProcessQMP struct.
The monitor config data can be initialized immediately before call to
qemuMonitorOpen and does not need to be maintained after the call
because qemuMonitorOpen copies any strings it needs.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move code for setting paths and prepping file system from
qemuProcessQMPNew to qemuProcessQMPInit.
This keeps qemuProcessQMPNew limited to data structures and path
initialization is done in qemuProcessQMPInit.
The patch is a non-functional, cut / paste change, however goto is now
"cleanup" rather than "error".
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store libDir path in the qemuProcessQMP struct in anticipation of moving
path construction code into qemuProcessQMPInit function.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All code related to QEMU monitor is moved from qemuProcessQMPNew and
qemuProcessQMPInit into qemuProcessQMPConnectMonitor.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a replacement for qemuProcessQMPRun to make the name consistent
with qemuProcessStart. The original qemuProcessQMPRun function is
renamed as qemuProcessQMPLaunch and becomes one of the simpler functions
called from the main qemuProcessQMPStart entry point. The following
patches will move parts of the code in qemuProcessQMPLaunch to the other
functions (qemuProcessQMPInit and qemuProcessQMPConnectMonitor).
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the pointer to QEMU stderr output in qemuProcessQMP struct instead
of requiring the caller to provide it (and free it).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's push the call to virQEMUCapsLogProbeFailure down the stack to
where the probing failure is detected.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuProcessQMPRun and virQEMUCapsInitQMPMonitor* functions called
from virQEMUCapsInit ignore some errors, the caller of virQEMUCapsInit
would report an error unless usedQMP is true anyway. And since usedQMP
can only be true if the probing code really succeeded (i.e., no errors
were ignored), we can just simplify the logic by not ignoring the errors
in the first place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function contains two almost identical parts. Let's consolidate them
into a single helper function and call it twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In new process code, move from model where qemuProcessQMP struct can be
used to activate a series of Qemu processes to model where one
qemuProcessQMP struct is used for one and only one Qemu process.
By allowing only one process activation per qemuProcessQMP struct, the
struct can safely store process outputs like status and stderr, without
being overwritten, until qemuProcessQMPFree is called.
By doing this, process outputs like status and stderr can remain stored
in the qemuProcessQMP struct without being overwritten by subsequent
process activations.
The forceTCG parameter (use / don't use KVM) will be passed when the
qemuProcessQMP struct is initialized since the qemuProcessQMP struct
won't be reused.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsInitQMP now stops QEMU process in all execution paths,
before freeing the process structure.
The qemuProcessQMPStop function can be called multiple times without
problems... Won't attempt to stop processes and free resources multiple
times.
Follow the convention established in qemu_process of
1) alloc process structure
2) start process
3) use process
4) stop process
5) free process data structure
The process data structure persists after the process activation fails
or the process dies or is killed so stderr strings can be retrieved
until the process data structure is freed.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/qemuProcessQMPAbort/qemuProcessQMPStop/ applied to change function
name used to stop QEMU processes in process code moved from
qemu_capabilities.
No functionality change.
The new name, qemuProcessQMPStop, is consistent with the existing
function qemuProcessStop used to stop Domain processes.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/cmd/proc/ in process code imported from qemu_capabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the const qualifier on non modified strings
(string only copied inside qemuProcessQMPNew)
so that const strings can be used directly in calls to
qemuProcessQMPNew in future patches.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We dropped support in commit 8e91a40 (November 2015), but some
occurrences still remained, even in live code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
My change in 112f3a8d0f was too drastic. The @charAlias
variable is initialized only if @monitor == true. However, it is
used even outside of that condition, at which point it's just
uninitialized pointer.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The @tmpChr is looked up in domain definition based on user
provided chardev XML. Therefore, the alias must have been
allocated already when domain was started up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is basically an old artefact from 24b0821926 when the idea
was:
1) Build device string only to see if chardev has any -device
associated with it and thus if device_del is needed
2) Detach chardev using chardev_del
Now, that DEVICE and DEVICE_DELETED capabilities are assumed for
every domain 1) does not make sense anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624204
The guestfwd channels are -netdevs really. Hotunplug them as
such. Also, DEVICE_DELETED event is not triggered (surprisingly,
since we're not issuing device_del rather than netdev_del) and
associated chardev is removed automagically too. This means that
we need to do qemuDomainRemoveChrDevice() minus monitor call to
remove the chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624204
The guestfwd channels are -netdevs really. Hotplug them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduced by d86c876a66.
There is no real need to have "user-" prefix for chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far we are passing @chr to qemuBuildChrDeviceStr. This is
suboptimal (in fact wrong) because @chr is just parsed XML
definition provided by user which by definition may lack some
information. On the other hand, @tmpChr is the one that was found
using @chr in domain definition so it contains the same amount of
information or more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for creating external snapshots for an offline domain
called out to qemu-img without escaping commas in the manner
that qemu-img expects. This also fixes a typo in the comment.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
These functions do mostly the same things, and it would be
preferrable if they did them in mostly the same ways. This
also fixes a few violations to our code style guidelines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function operates on a virDomainDef and is not tied to
device address assignment in any way, so it makes more sense
for it to live along with qemuDomainIs*() and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Ideally we'd make all of them static, but there are a few
cases where we don't have a virDomainDef instance handy and
so they are the only option.
For the few ones we're forced to keep exporting, document
through comments that the alternative is preferred.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have added architecture checks to all
qemuDomainIs*() functions, we no longer need to perform the
same checks separately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There is very little overlap in the machine types available
on different architectures, so broadly speaking checking the
machine type is usually enough; regardless, it's better to
check the architecture as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We want the signatures to be consistent, and also we're
going to start using the additional parameter next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Make sure related functions, eg. all qemuDomainIs*(), are
close together instead of being sprinkled throughout both
the header and implementation file, and also that all
qemuDomainMachine*() functions are declared first since
we're going to make a bunch of them static later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
