These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
The following XML is the recommended default clock configuration for
qemu:
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
However we weren't testing any of those timer elements.
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
Sample offending configuration:
<devices>
...
<rng model='virtio'>
<backend model='egd' type='unix'>
<source mode='bind' service='1024'/>
</backend>
</rng>
</devices>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
Commit ef5d51d fixed a crash for numatune with auto placement and
nodeset specified:
<numatune>
<memory mode='preferred' placement='auto' nodeset='0'/>
</numatune>
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU command line syntax for RBD disks is
file=rbd:pool/image:opt1=val1:opt2=val2...
There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server. Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.
The URI syntax also supports relative paths to Unix sockets. These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.
The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The data files for testing QEMU command line generation are
hardcoded to use /etc/pki, so we should explicitly set that
in the test case, avoiding the dynamic SYSCONFDIR value.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Valgrind deterimined that fakeSecretGetValue() was using the secret
value without checking validity. Returning NULL causes the caller
to emit a message and results in failure.
Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Coverity determined that 'emulator' could no longer be set and determined the
code was dead. Looking through the history, I discovered commit-id ed769e18
removed code originally added by commit-id 9237e955 and further modified by
commit-id 6a7e7c4f.
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
'-device VGA' maps to '-vga std'
'-device cirrus-vga' maps to '-vga cirrus'
'-device qxl-vga' maps to '-vga qxl'
(there is also '-device qxl' for secondary devices)
'-device vmware-svga' maps to '-vga vmware'
For qemu(>=1.2), we can use -device to replace -vga for video
device. For the primary video device, the patch tries to use 0x2
slot for matching old qemu. If the 0x2 slot is allocated already,
the addr property could help for using any available slot.
For qemu(< 1.2), we keep using -vga for primary device.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.
As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd
supports wwn property. (NB, scsi-block doesn't support to set wwn).
* src/qemu/qemu_command.c: Error out if underlying QEMU doesn't
support wwn property for the device; Set wwn for the device otherwise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test
* tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise
* tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise
* tests/qemuxml2argvtest.c: Add the new tests.
This patch adds full support for EOI setting for domains. Because this
is CPU feature (flag), the model needs to be added even when it's not
specified. Fortunately this problem was already solved with kvmclock,
so this patch simply abuses that.
And due to the size of the patch (17 lines) I dared to include the tests.
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Qemu command line generation for geometry override and testcases.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.
This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
This patch enhances qemuxml2argvtest to deal with semantically incorrect
domain XMLs, that generate errors while parsing.
This patch cleans up macros that invoke the tests and changes boolean
flags to a bit array flag variable.
Add minimal s390-virtio domain testcase and testcases for virtio serial,
net, disk for the virtio-s390 bus.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Rewrote the device assignment parts in tests to use qemuDomainAssignAddresses.
This way the tests will work for new device address types as they show
up in the future (like s390 device types).
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
Error: RESOURCE_LEAK:
/libvirt/tests/qemuxml2argvtest.c:47:
alloc_arg: Calling allocation function "virAlloc" on "ret".
/libvirt/src/util/memory.c:101:
alloc_fn: Storage is returned from allocation function "calloc".
/libvirt/src/util/memory.c:101:
var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/libvirt/tests/qemuxml2argvtest.c:54:
leaked_storage: Variable "ret" going out of scope leaks the storage it points to.
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
When building on Fedora 17 (which uses gcc 4.7.0) with -O0 in CFLAGS,
three of the tests failed to compile.
cputest.c and qemuxml2argvtest.c had non-static structs defined
inside the macro that was being repeatedly invoked. Due to some so-far
unidentified change in gcc, the stack space used by variables defined
inside { } is not recovered/re-used when the block ends, so all these
structs have become additive (this is the same problem worked around
in commit cf57d345b). Fortunately, these two files could be fixed with
a single line addition of "static" to the struct definition in the
macro.
virnettlscontexttest.c was a bit different, though. The problem structs
in the do/while loop of macros had non-constant initializers, so it
took a bit more work and piecemeal initialization instead of member
initialization to get things to be happy.
In an ideal world, none of these changes should be necessary, but not
knowing how long it will be until the gcc regressions are fixed, and
since the code is just as correct after this patch as before, it makes
sense to fix libvirt's build for -O0 while also reporting the gcc
problem.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.
New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.
One of the recent commits introduced support for
spice agent-mouse. However, test for this feature
require some tweaking: pass QEMU_CAPS_CHARDEV_SPICEVMC |
QEMU_CAPS_NODEFCONFIG and add "-vga cirrus".
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
Commit b170eb99 introduced a bug: domains that had an explicit
<seclabel type='none'/> when started would not be reparsed if
libvirtd restarted. It turns out that our testsuite was not
exercising this because it never tried anything but inactive
parsing. Additionally, the live XML for such a domain failed
to re-validate. Applying just the tests/ portion of this patch
will expose the bugs that are fixed by the other two files.
* docs/schemas/domaincommon.rng (seclabel): Allow relabel under
type='none'.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG,
presence of <seclabel> with no type implies dynamic. Don't
require sub-elements for type='none'.
* tests/qemuxml2xmltest.c (mymain): Add test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file.
Reported by Ansis Atteka.
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.
After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
QEMU supports a bunch of CPUID features that are tied to the kvm CPUID
nodes rather than the processor's. They are "kvmclock",
"kvm_nopiodelay", "kvm_mmu", "kvm_asyncpf". These are not known to
libvirt and their CPUID leaf might move if (for example) the Hyper-V
extensions are enabled. Hence their handling would anyway require some
special-casing.
However, among these the most useful is kvmclock; an additional
"property" of this feature is that a <timer> element is a better model
than a CPUID feature. Although, creating part of the -cpu command-line
from something other than the <cpu> XML element introduces some
ugliness.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was missing capability for blkiotune and thus specifying these
settings caused libvirt to run qemu with invalid parameters and then
reporting qemu error instead of the standard libvirt one. The support
for blkiotune setting was added in upstream qemu repo under commit
0563e191516289c9d2f282a8c50f2eecef2fa773.
This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.
When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<driver type='path' wrpolicy='immediate'/>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.
We support <interface> of type "mcast", "server", and "client",
but the RNG schema for them are missed. Attribute "address" is
optional for "server" type. And these 3 types support
<mac address='MAC'/>, too.
Add four tests of the XML -> argv handling for the PPC64 pseries machine.
The first is just a basic test of a bare bones machine.
The three others test various aspects of the spapr-vio address handling.
It seems that currently we can't include network devices, doing so leads
to a segfault because the network driverState is not initialised. Working
around that leads us to the problem that the 'default' network doesn't
exist. So for now just leave network devices out.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
We can't call qemuCapsExtractVersionInfo() from test code, because it
expects to be able to call the emulator, and for testing we have fake
emulators that can't be executed. For that reason qemuxml2argvtest.c
doesn't call qemuDomainAssignPCIAddresses(), instead it open codes its
own version.
That means we can't call qemuDomainAssignAddresses() from the test code,
instead we need to manually call qemuDomainAssignSpaprVioAddresses().
Also add logic to cope with qemuDomainAssignSpaprVioAddresses() failing,
so that we can write a test that checks for a known failure in there.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new introduced optional attribute "copy_on_read</code> controls
whether to copy read backing file into the image file. The value can
be either "on" or "off". Copy-on-read avoids accessing the same backing
file sectors repeatedly and is useful when the backing file is over a
slow network. By default copy-on-read is off.
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.
As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.
device='lun' is identical to the default device='disk', except that:
1) It is only allowed if bus='virtio', type='block', and the qemu
version is "new enough" to support it ("new enough" == qemu 0.11 or
better), otherwise the domain will fail to start and a
CONFIG_UNSUPPORTED error will be logged).
2) The option "scsi=on" will be added to the -device arg to allow
SG_IO commands (if device !='lun', "scsi=off" will be added to the
-device arg so that SG_IO commands are specifically forbidden).
Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.
*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter
*src/qemu/qemu_(command|driver|hotplug).c - treat
VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.
Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
Implement the parsing and formatting of the XML addition of
the previous commit. The new XML doesn't affect qemu command
line, so we can now test round-trip XML->memory->XML handling.
I chose to reuse the existing structure, even though per-device
override doesn't use all of those fields, rather than create a
new structure, in order to reuse more code.
* src/conf/domain_conf.h (_virDomainDiskDef): Add seclabel member.
* src/conf/domain_conf.c (virDomainDiskDefFree): Free it.
(virSecurityLabelDefFree): New function.
(virDomainDiskDefFormat): Print it.
(virSecurityLabelDefFormat): Reduce output if model not present.
(virDomainDiskDefParseXML): Alter signature, and parse seclabel.
(virSecurityLabelDefParseXML): Split...
(virSecurityLabelDefParseXMLHelper): ...into new helper.
(virDomainDeviceDefParse, virDomainDefParseXML): Update callers.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-dynamic-override.args:
New file.
* tests/qemuxml2xmltest.c (mymain): Enhance test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
The RNG for <seclabel> was too strict - if it was present, then it
had to have sub-elements, even if those didn't make sense for the
given attributes. Also, we didn't have any tests of <seclabel>
parsing or XML output.
In this patch, I added more parsing tests than output tests (since
the output populates and/or reorders fields not present in certain
inputs). Making the RNG reliable is a precursor to using <seclabel>
variants in more places in the XML in later patches.
See also:
http://berrange.com/posts/2011/09/29/two-small-improvements-to-svirt-guest-configuration-flexibility-with-kvmlibvirt/
* docs/schemas/domaincommon.rng (seclabel): Tighten rules.
* tests/qemuxml2argvtest.c (mymain): New tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*.*: New files.
Currently non-x86 guests must have <acpi/> defined in <features> to
prevent libvirt from running qemu with -no-acpi. Although it works, it
is a hack.
Instead add a capability flag which indicates whether qemu understands
the -no-acpi option. Use it to control whether libvirt emits -no-acpi.
Current versions of qemu always display -no-acpi in their help output,
so this patch has no effect. However the development version of qemu
has been modified such that -no-acpi is only displayed when it is
actually supported.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
This improves the support for qemu rbd devices by adding support for a few
key features (e.g., authentication) and cleaning up the way in which
rbd configuration options are passed to qemu.
An <auth> member of the disk source xml specifies how librbd should
authenticate. The username attribute is the Ceph/RBD user to authenticate as.
The usage or uuid attributes specify which secret to use. Usage is an
arbitrary identifier local to libvirt.
The old RBD support relied on setting an environment variable to
communicate information to qemu/librbd. Instead, pass those options
explicitly to qemu. Update the qemu argument parsing and tests
accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_process.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
test file
Rather than making all clients of monitor commands that are JSON-only
check whether yajl support was compiled in, it is simpler to just
avoid setting the capability bit up front if we can't use the capability.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Only set
capability bit if we also have yajl library to use it.
* src/qemu/qemu_driver.c (qemuDomainReboot): Drop #ifdefs.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* tests/qemuhelptest.c (testHelpStrParsing): Pass test even
without yajl.
* tests/qemuxml2argvtest.c (mymain): Simplify use of json flag.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-error-*.args:
Update expected results to match.
This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.
This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).
For consistency, the value "report" has been added to the possible
values for error_policy as well.
commit 12062ab set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).
After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.
Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.
Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
as even if $prefix_CACHE_V2 is set, we can't know if unsafe
is supported.
* Improved the reliability of qemu cache type detection.
The commit that prevents disk corruption on domain shutdown
(96fc478417) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.
This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.htmlhttps://www.redhat.com/archives/libvir-list/2011-August/msg00552.html
Adds snapshot attribute and transient sub-element:
<devices>
<disk type=... snapshot='no|internal|external'>
...
<transient/>
</disk>
</devices>
* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.
Another solution would be to permit addressing on non-legacy USB
controllers only.
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.
<hub type='usb'>
<address type='usb' bus='0' port='1'/>
</hub>
<input type='mouse' type='usb'>
<address type='usb' bus='0' port='1.1'/>
</hub>
also add a test entry
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
As even $prefix_CACHE_V2 is set, we can't known if directsync
is supported.
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).
As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).
docs/formatdomain.html.in: document the new flag (marking it as
"don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.
- In qemuDomainObjPrivatePtr we have a bool fakeReboot
flag.
- The virDomainReboot method sets this flag and then
triggers a normal 'system_powerdown'.
- The QEMU process is started with '-no-shutdown'
so that the guest CPUs pause when it powers off the
guest
- When we receive the 'POWEROFF' event from QEMU JSON
monitor if fakeReboot is not set we invoke the
qemuProcessKill command and shutdown continues
normally
- If fakeReboot was set, we spawn a background thread
which issues 'system_reset' to perform a warm reboot
of the guest hardware. Then it issues 'cont' to
start the CPUs again
* src/qemu/qemu_command.c: Add -no-shutdown flag if
we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
fakeReboot is set
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.
Make virtTestLoadFile allocate the buffer to read the file into.
Fix logic error in virtTestLoadFile, stop reading on the first empty line.
Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.
A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!). It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.
* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.
Latent bug introduced in commit 2d6a581960 (Aug 2009), but not exposed
until commit 1859939a (Jan 2011). Basically, when virExec creates a
pipe, it always marks libvirt's side as cloexec. If libvirt then
wants to hand that pipe to another child process, things work great if
the fd is dup2()'d onto stdin or stdout (as with stdin: or exec:
migration), but if the pipe is instead used as-is (such as with fd:
migration) then qemu sees EBADF because the fd was closed at exec().
This is a minimal fix for the problem at hand; it is slightly racy,
but no more racy than the rest of libvirt fd handling, including the
case of uncompressed save images. A more invasive fix, but ultimately
safer at avoiding leaking unintended fds, would be to _always and
atomically_ open all fds as cloexec in libvirt (thanks to primitives
like open(O_CLOEXEC), pipe2(), accept4(), ...), then teach virExec to
clear that bit for all fds explicitly marked to be handed to the child
only after forking.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Clear cloexec
flag.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Tweak test.
For qemu names the primary vga as "qxl-vga":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE,...
2) if vram is not specified for 2nd qxl device, (use the default
set by global):
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
For qemu names all qxl devices as "qxl":
1) if vram is specified for 2nd qxl device:
-vga qxl -global qxl.vram_size=$SIZE \
-device qxl,id=video1,vram_size=$SIZE ...
2) if vram is not specified for 2nd qxl device:
-vga qxl -global qxl-vga.vram_size=$SIZE \
-device qxl,id=video1,...
"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).
For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.
v1 - v2:
* modify "virDomainVideoDefaultRAM" so that it returns 16M as the
default vram_size for qxl device.
* vram_size * 1024 (qemu accepts bytes for vram_size).
* apply default vram_size for qxl device for which vram_size is
not specified.
* modify "graphics-spice" tests (more sensiable vram_size)
* Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).
v2 - v3:
* Modify default video memory size for qxl device from 16M to 24M
* Update codes to be consistent with changes on qemu_capabilities.*
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
enum values have to fit into int
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=629662
Explanation
qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.
'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)
'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)
The resulting difference, according to the qemu developer who added
the option is:
bh makes tx more asynchronous and reduces latency, but potentially
causes more processor bandwidth contention since the cpu doing the
tx isn't necessarily the cpu where the guest generated the
packets.
Solution
This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:
<interface ...>
...
<model type='virtio'/>
<driver txmode='iothread'/>
...
</interface>
I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)
Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of
qemu -device virtio-net-pci,?
If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()
The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.
So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.
tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()
set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.
* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.
Adds <smartcard mode='passthrough' type='spicevmc'/>, which uses the
new <channel name='smartcard'/> of <graphics type='spice'>.
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainGraphicsSpiceChannelName): New
enum value.
(virDomainChrSpicevmcName): New enum.
(virDomainChrSourceDef): Distinguish spicevmc types.
* src/conf/domain_conf.c (virDomainGraphicsSpiceChannelName): Add
smartcard.
(virDomainSmartcardDefParseXML): Parse it.
(virDomainChrDefParseXML, virDomainSmartcardDefParseXML): Set
spicevmc name.
(virDomainChrSpicevmc): New enum conversion functions.
* src/libvirt_private.syms: Export new functions.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Conditionalize
name.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.args:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.xml:
Likewise.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=615757
Add a new character device backend for virtio serial channels that
activates the QEMU spice agent on the main channel using the vdagent
spicevmc connection. The <target> must be type='virtio', and supports
an optional name that specifies how the guest will see the channel
(for now, name must be com.redhat.spice.0).
<channel type='spicevmc'>
<target type='virtio'/>
<address type='virtio-serial' controller='1' bus='0' port='3'/>
</channel>
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainChrType): New enum value.
* src/conf/domain_conf.c (virDomainChr): Add spicevmc.
(virDomainChrDefParseXML, virDomainChrSourceDefParseXML)
(virDomainChrDefParseTargetXML): Parse and enforce proper use.
(virDomainChrSourceDefFormat, virDomainChrDefFormat): Format.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildCommandLine): Add qemu support.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.xml: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.args:
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu allows the user to choose what io storage api should be used,
either the default (threads) or native (linux aio) which in the latter
case can result in better performance.
Based on a patch originally by Matthias Dahl.
Red Hat Bugzilla #591703
Signed-off-by: Eric Blake <eblake@redhat.com>
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.
This is basically Dan's proposal of
<sound model='ich6'>
<codec type='output' slot='0'/>
<codec type='duplex' slot='3'/>
</sound>
without the codec bits implemented.
The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:
- every <sound> device has a <codec type='default'/> (unless codecs are
manually specified)
- <codec type='none'/> is required to specify 'no codecs'
- new audio settings like mic=on|off could then be exposed in
<sound> or <codec> in a consistent manner for all sound models
v2:
Use model='ich6'
v3:
Use feature detection, from eblake
Set codec id, bus, and cad values
v4:
intel-hda isn't supported if -device isn't available
v5:
Comment spelling fixes
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
https://bugzilla.redhat.com/show_bug.cgi?id=620363
When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete. Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.
The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible. Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.
The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.
Commit febc591683 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.
* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file
before executing it here, rather than in callers.
(qemudBuildCommandLine): Rewrite with virCommand.
* src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature.
* src/qemu/qemu_driver.c (qemuAssignPCIAddresses)
(qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.
This patch allows for using custom scripts instead of /usr/bin/qemu
emulator in domain XML. To do so, one would specify relative path to the
custom script in <emulator/>. The path needs to be relative to
qemuxml2argvdata directory and it will be transparently made absolute in
runtime. The expected command line needs to contain the exact relative
path as was used in domain XML.
The problem is RelaxNG schema for domain XML only allows for absolute
path within <emulator/>. To workaround it, an extra '/' must be added at
the beginning of the path. That is, instead of "./qemu.sh" or
"../emulator/qemu.sh" one would use "/./qemu.sh" or
"/../emulator/qemu.sh". The extra slash is removed before further
processing. I don't like this workaround, it's very ugly but it's the
best option I was able to come up with. Relaxing domain XML schema is
not an option IMO.
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.
* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
-spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL
* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
case for generating spice args with RHEL6 kvm
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
Make use of the existing <filesystem> element to support plan9fs
filesystem passthrough in the QEMU driver
<filesystem type='mount'>
<source dir='/export/to/guest'/>
<target dir='/import/from/host'/>
</filesystem>
NB, the target is not actually a directory, it is merely a arbitrary
string tag that is exported to the guest as a hint for where to mount
it.
Add tests for auto memballon, implicit IDE, SCSI, virtio channel
controllers, and console/serial back compat.
Additionally, an explicit qemuxml2argvtest for scsi disks is added.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.
Changes since v1:
- Change the domain.rng to correspond to the new schema
- Don't allocate caps->ns in testQemuCapsInit since it is a static table
Changes since v2:
- Change domain.rng to add restrictions on allowed environment names
Changes since v3:
- Remove a bogus comment in the tests
Signed-off-by: Chris Lalancette <clalance@redhat.com>
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
The previous change which split -nodefconfig probing off
from -device broke the test case because it missed adding
the QEMUD_CMD_FLAG_NODEFCONFIG to the test
* src/util/bridge.c: Set QEMUD_CMD_FLAG_NODEFCONFIG for all
configs with QEMUD_CMD_FLAG_DEVICE set
The virtio serial changes broke the test suite because they forgot
to add the new address attribute to the domain XML schema. The
xml2xml test also broke because the XML no longer roundtrips. This
is due to testing of auto-addition of <controller> elements. Split
that test case off into a separate XML file to avoid breakage
* docs/schemas/domain.rng: Allow port number for virtio serial addresses
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to
a simple config to avoid breaking xml2xml test
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add
complex test case for auto-controller addition for xml2argv test
* tests/qemuxml2argvtest.c: Add channel-virtio-auto test
* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag
* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
add a specific regression test
Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU
* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
for timezone tests
This allows QEMU guests to be started with an arbitrary clock
offset
The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
qemuxml2argvtest.c: Test case, except we can't actually enable
it yet.
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:
-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4
and the following for a virtio channel:
-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0
* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
QEMU command line generation
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.
* src/qemu/qemu_conf.c: add a comment about copied environment variables
and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none
* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
data files
The old syntax was
-usbdevice host:PRODUCT:VENDOR
Or
-usbdevice host:BUS.DEV
The new syntax is
-device usb-host,product=PRODUCT,vendor=VENDOR
Or
-device usb-host,hostbus=BUS,hostaddr=DEV
The previous syntax was severely limited in its options
-usbdevice disk:/home/berrange/output.img
The new syntax is the same as for other disk types
-drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
-device usb-storage,drive=usb-1
Again, the index= arg is wrong here, and will be removed in a
later merge
The current syntax uses a pair of args
-net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
-net user,vlan=3,name=user.0
The new syntax does not need the vlan craziness anymore, and
so has a simplified pair of args
-netdev user,id=user.0
-device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
The current syntax for audio devices is a horrible multiplexed
arg
-soundhw sb16,pcspk,ac97
The new syntax is
-device sb16,id=sound0
or
-device AC97,id=sound1,addr=<PCI SLOT>
NB, pcspk still uses the old -soundhw syntax
The current character device syntax uses either
-serial tty,path=/dev/ttyS2
Or
-chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0
With the new -device support, we now prefer
-chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0
This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.
The monitor device changes to
-chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor
In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
* tests/testutilsqemu.c: add a machine types list for /usr/bin/kvm
which doesn't have any aliases, while the guest has aliases
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.*,
tests/qemuxml2argvtest.c: add a test using /usr/bin/kvm and make
sure that 'pc' machine type doesn't get canonicalized using the
aliases in the guest machine type list
* tests/testutilsqemu.c: make 'pc' an alias for qemu-system-x86_64
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases1.*,
tests/qemuxml2argvtest.c: add a test which uses qemu-system-x86_64
and make sure the machine type is canonicalized.
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.
* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
that the -pcidevice command line option is available
* tests/*: update the tests
We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
and add a regression test for it.
Daniel
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
