The next release of QEMU is going to be 4.0.0. A bit early, but
this adds capabilities data for x86_64 from current qemu git
15bede554162dda822cd762c689edb6fa32b6e3b
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
More specifically, everything that's tested by qemucapabilities
now goes through qemucaps2xml as well.
Ideally we'll rewrite both so that listing all test cases is
unnecessary and they get picked up automatically by listing the
contents of the input directory instead, but that's a refactor
for another day :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 4dd6054000.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.
Use this constant to guard tests that depend on stable ordering.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Based on qemu commit ab3257c281c1a1a91da1090ac9e38ddd8f860c63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:
1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test data for capabilities is obtained from two consecutive qemu
runs when the regular monitor object will be reset. Do the same for the
test monitor object which is not disposed between runs by calling
qemuMonitorResetCommandID.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the policy described on https://libvirt.org/platforms.html
the QEMU versions in the oldest relevant releses are:
SLES 12: 2.0.0
RHEL 7: 1.5.3
Ubuntu 14.04: 2.0.0
Set the minimum to 1.5.0 and drop support for RHEL 6.
This will let us assume lots of capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When GIC support was introduced (QEMU 2.6 timeframe) we needed
to make sure both GICv2 hardware and GICv3 hardware were handled
correctly, and that was achieved by having separate capabilities
data for each.
Now that we have capabilities data for several QEMU versions we
can stop storing data for GICv2 and GICv3 hardware separately,
and instead have GICv2 data for QEMU <= 2.10 and GICv3 data for
QEMU >= 2.12, without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is compiled from the v2.12.0-rc0 tag.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the xml and reply files for QEMU 2.11.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Sometimes we don't regenerate QEMU capabilities replies using QEMU
binary but we simply add a new entry manually. In that case you need
to manually fix all the replies ids. This helper will do that for you.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell
and Broadwell machines.
Therefore, place microcode version in the virQEMUCaps struct and
XML, and rebuild the cache if the versions do not match.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The architecture itself is called ppc64, and it can run both in big
endian and little endian mode - the latter is known as ppc64le.
From the (virtual) hardware point of view, ppc64 is a more accurate
name so it should be used here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For reference, these were generated by updating a local qemu git
repository to the latest upstream, making sure the latest dependencies
were met via "dnf builddep qemu" from my sufficiently privileged root
account, checking out the v2.10.0 tag, and building in order to generate
an "x86_64-softmmu/qemu-system-x86_64" image.
Then using a clean libvirt tree updated to master and built, the image
was then provided as input:
tests/qemucapsprobe /path/to/x86_64-softmmu/qemu-system-x86_64 > \
tests/qemucapabilitiesdata/caps_2.10.0.x86_64.replies
With the .replies file in place and the DO_TEST line added and build,
then running the following commands:
touch tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml
VIR_TEST_REGENERATE_OUTPUT=1 ./tests/qemucapabilitiestest
to generate tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml and both
were added to the commit.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Cleanups the code a little bit and reduces amount of arguments passed
throughout the functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.9.0 is not released yet but it's close to its release and
we need this data to implement new features that will be in
that release.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Expected Qemu replies for versions 2.7 and 2.8 from the s390x
Qemu binary.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
CPU related capabilities may differ depending on accelerator used when
probing. Let's use KVM if available when probing QEMU and fall back to
TCG. The created capabilities already contain all we need to distinguish
whether KVM or TCG was used:
- KVM was used when probing capabilities:
QEMU_CAPS_KVM is set
QEMU_CAPS_ENABLE_KVM is not set
- TCG was used and QEMU supports KVM, but it failed (e.g., missing
kernel module or wrong /dev/kvm permissions)
QEMU_CAPS_KVM is not set
QEMU_CAPS_ENABLE_KVM is set
- KVM was not used and QEMU does not support it
QEMU_CAPS_KVM is not set
QEMU_CAPS_ENABLE_KVM is not set
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Host capabilities provide libvirt's view of the host CPU, but for a
useful support for host-model CPUs we really need a hypervisor's view of
the CPU. And since the view can be differ with emulator, qemu
capabilities is the best place to store the host CPU model.
This patch just copies the CPU model from host capabilities, but this
will change in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Doing a load, copy, format cycle on all QEMU capabilities XML files
should make sure we don't forget to update virQEMUCapsNewCopy when
adding new elements to QEMU capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current version uses the first JSON reply from the file as monitor
greeting. With the new parameter the caller can now request a simple
test monitor to be created, which uses an artificial greeting and uses
all JSON strings from the file as regular replies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It's a convenient wrapper around qemuMonitorTestNew which feeds the test
monitor with QMP replies from a specified file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
