qemuProcessStart expects to be run with a job already set and every
caller except for qemuMigrationPrepareAny use it correctly. This bug can
be observed in libvirtd logs during incoming migration as
warning : qemuDomainObjEnterMonitorInternal:979 : This thread seems
to be the async job owner; entering monitor without asking for a
nested job is dangerous
With the apparmor security driver enabled, qemu instances fail
to start
# grep ^security_driver /etc/libvirt/qemu.conf
security_driver = "apparmor"
# virsh start test-kvm
error: Failed to start domain test-kvm
error: internal error security label already defined for VM
The model field of virSecurityLabelDef object is always populated
by virDomainDefGetSecurityLabelDef(), so remove the check for a
NULL model when verifying if a label is already defined for the
instance.
Checking for a NULL model and populating it later in
AppArmorGenSecurityLabel() has been left in the code to be
consistent with virSecuritySELinuxGenSecurityLabel().
As pointed out in
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1034661
The sentence
"The function of PCI device addresses must less than 8"
does not quite make sense. Update that to read
"The function of PCI device addresses must be less than 8"
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Currently, qemuDomainShutdownFlags() chooses the agent method of
shutdown whenever the agent is configured. However, this
assumption is not enough as the guest agent may be unresponsive
at the moment. So unless guest agent method has been explicitly
requested, we should fall back to the ACPI method.
The unitialized local variable qemuVersion can cause an random value
to be returned for the hypervisor version, observable with virsh version.
Introduced by commit b46f7f4a0b
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
disk->src is still used for disks->hosts->name, do not free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The QEMU driver has a list of devices nodes that are whitelisted
for all guests. The kernel has recently started returning an
error if you try to whitelist a device which does not exist.
This causes a warning in libvirt logs and an audit error for
any missing devices. eg
2013-02-27 16:08:26.515+0000: 29625: warning : virDomainAuditCgroup:451 : success=no virt=kvm resrc=cgroup reason=allow vm="vm031714" uuid=9d8f1de0-44f4-a0b1-7d50-e41ee6cd897b cgroup="/sys/fs/cgroup/devices/libvirt/qemu/vm031714/" class=path path=/dev/kqemu rdev=? acl=rw
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code for putting the emulator threads in a separate cgroup
would spam the logs with warnings
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 3
2013-02-27 16:08:26.731+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 4
2013-02-27 16:08:26.732+0000: 29624: warning : virCgroupMoveTask:887 : no vm cgroup in controller 6
This is because it has only created child cgroups for 3 of the
controllers, but was trying to move the processes from all the
controllers. The fix is to only try to move threads in the
controllers we actually created. Also remove the warning and
make it return a hard error to avoid such lazy callers in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCloseCallbacksRunOne method was passing a uuid string
to virDomainObjListFindByUUID, when it actually expected to get
a raw uuid buffer. This was not caught by the compiler because
the method was using a 'void *uuid' instead of first casting
it to the expected type.
This regression was accidentally caused by refactoring in
commit 568a6cda27
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Fri Feb 15 15:11:47 2013 +0100
qemu: Avoid deadlock in autodestroy
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=896092 mentions that
qemu 1.4 and earlier only accept a simple start-stop range for
the cpu=... argument of -numa. Libvirt would attempt to use
-numa cpu=1,3 for a disjoint range, which did not work as intended.
Upstream qemu will be adding a new syntax for disjoint cpu ranges
in 1.5; but the design for that syntax is still under discussion
at the time of this patch. So for libvirt 1.0.3, it is safest to
just reject attempts to build an invalid qemu command line; in the
future, we can add a capability bit and translate to the final
accepted design for selecting a disjoint cpu range in numa.
* src/qemu/qemu_command.c (qemuBuildNumaArgStr): Reject disjoint
ranges.
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
These two flags in fact are mutually exclusive. Requesting them both
doesn't make any sense regardless of hypervisor driver. Hence, we have
to make it within libvirt.c file instead of fixing it in each driver.
Eugene Marcotte reported that if gcrypt-devel (a prereq of
gnutls-devel) is not present, then compilation fails due to
an unconditional use of <gcrypt.h>.
* src/libvirt.c (includes): Properly guard use of gcrypt.h.
This reverts commit 0bbbd42c30.
The design for this feature is not complete, and may change the
name of the 'schid' attribute. Revert requested by Viktor Mihajlovski.
The parallels storage driver declared some loop variables
inside the for(;;). This is not allowed by libvirt coding
standards
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This change tried to fix a crash with changing CDROM media but
failed to actually do so
commit d0172d2b1b
Author: Osier Yang <jyang@redhat.com>
Date: Tue Feb 19 20:27:45 2013 +0800
qemu: Remove the shared disk entry if the operation is ejecting or updating
It was still accessing disk->src, when the entire 'disk' object
has been free'd already. Even if it weren't free'd, accessing
the 'src' value of virDomainDiskDef is not allowed without
first validating disk->type is file or block. Just remove the
broken code entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VIR_ERR_NO_CONNECT already contains "no connection driver available".
This patch changes:
no connection driver available for No connection for URI hello
to:
no connection driver available for hello
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=851413
Currently we call virSetDeviceUnprivSGIO with val == 0 if a block device
has an sgio attribute. But for sgio='filtered', we know that a
kernel with no unpriv_sgio support will always behave as the user
wanted. In this case, there is no need to call the function and
report a (bogus) error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If virCondInit fails (okay, so that's unlikely), then we end up
attempting a virObjectUnlock() on the cleanup path, even though
we don't hold a lock. This is not guaranteed to be safe. While
at it, I noticed a couple places where we were referencing mon->fd
outside locks.
* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal): Minimize lock
duration. mon->watch doesn't need clean up on error.
(qemuMonitorGetBlockExtent, qemuMonitorBlockResize): Don't
dereference fd outside of lock.
I built without yajl support, and noticed a strange failure message
in qemumonitorjsontest:
2013-02-22 16:12:37.503+0000: 19812: error : virJSONValueToString:1119 : internal error No JSON parser implementation is available
2013-02-22 16:12:37.503+0000: 19812: error : qemuMonitorJSONCommandWithFd:253 : out of memory
While a later patch will fix the test to skip when json is not present,
this patch avoids overriding the more useful error message from
virJSONValueToString returning NULL.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCommandWithFd):
Don't override message.
(qemuMonitorJSONCheckError): Don't print NULL.
* src/qemu/qemu_agent.c (qemuAgentCommand): Don't override message.
(qemuAgentCheckError): Don't print NULL.
(qemuAgentArbitraryCommand): Properly fail on OOM.
The new TypedParam helper APIs allow to simplify this function
significantly.
This patch integrates the fix in 75e5bec97b
by correctly ordering the setting functions instead of reordering the
parameters.
The bridge device was showing the vnet devices created for the domains
as connected to the bridge. libvirt should only show host devices when
trying to get the interface definition rather than the domain devices as
well.
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast the magic -1 to the appropriate type.
Signed-off-by: Philipp Hahn <hahn@univention.de>
uid_t and gid_t are opaque types, ranging from s32 to u32 to u64.
Explicitly cast them to unsigned int for printing.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The uid_t|gid_t values are explicitly casted to "unsigned long", but the
printf() still used "%d", which is for signed values.
Change the format to "%u".
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds a new capability bit QEMU_CAPS_OBJECT_RNG_EGD and code
to support the egd backend for the VirtIO RNG device.
The device is added by 3 qemu command line options:
-chardev socket,id=charrng0,host=1.2.3.4,port=1234 (communication
backend)
-object rng-egd,chardev=charrng0,id=rng0 (RNG protocol client)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (the RNG device)
This patch implements support for the virtio-rng-pci device and the
rng-random backend in qemu.
Two capabilities bits are added to track support for those:
QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and
QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support.
qemu is invoked with these additional parameters if the device is
enabled:
-object rng-random,id=rng0,filename=/test/phile (to add the backend)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)
This patch adds basic configuration support for the RNG device
supporting the virtio model with the "random" and "egd" backend types as
described in the schema in the previous patch.
This patch adds a fake switch statement to force the compiler to warn
after a new device type was added. This should remind the contributor to
add the new device also to this iterator function.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
For really old qemu-img binaries which do not support specifying
the format of the backing file, display a DEBUG message instead of
INFO that this can't be done.
This function does the source part of NBD magic. It
invokes drive-mirror on each non shared and RW disk with
a source and wait till the mirroring process completes.
When it does we can proceed with migration.
Currently, an active waiting is done: every 500ms libvirt
asks qemu if block-job is finished or not. However, once
the job finishes, qemu doesn't report its progress so we
can only assume if the job finished successfully or not.
The better solution would be to listen to the event which
is sent as soon as the job finishes. The event does
contain the result of job.
We need to start NBD server and feed it with all non-<shared/>,
RW and source-full disks. Moreover, with new virPortAllocator we
must ensure the borrowed port for NBD server will be returned if
either migration completes or qemu process is torn down.
This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.
This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.
This migration cookie is meant for two purposes. The first is to be sent
in begin phase from source to destination to let it know we support new
implementation of VIR_MIGRATE_NON_SHARED_{DISK,INC} so destination can
start NBD server. Then, the second purpose is, destination can let us
know, on which port the NBD server is running.
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
The bfree and blocks fields are supposed to be in units of frsize. We were
calculating capacity correctly using those units, but the available
calculation was using bsize instead. Most file systems report these as the
same value specifically because many programs are buggy, but that is no
reason to rely on that behavior, or to behave inconsistently.
This bug has been present since e266ded (2008) and aa296e6c, when the code
was originally introduced (the latter via cut and paste).
Signed-off-by: Sage Weil <sage@newdream.net>
On FreeBSD, I got a 'make check' failure:
GEN check-symsorting
Symbol block at ./libvirt_atomic.syms:4: viratomic.h not found
* src/Makefile.am (SYM_FILES): New define.
(check-symsorting): Check on all symfiles, even when not used.
* src/libvirt_atomic.syms: Fix offender.
As a side effect, this also fixes reporting disk migration process.
It was added to memory migration progress, which was wrong. Disk
progress has dedicated fields in virDomainJobInfo structure.
remoteDeserializeTypedParameters can now be called with either
preallocated params array (size of which is announced by nparams) or it
can allocate params array according to the number of parameters received
from the server.
Refactored the interface device type identification to make it more
clear about the operations. Add support for udev devtype to detect
VLANs on Linux 3.7 and newer. Move VLAN detection based on device
name to fallback case.
Mechanical move to break up udevIfaceGetIfaceDef() into different
helpers for each of the interface types to hopefully make the code
easier to follow. This moves the vlan code to
udevIfaceGetIfaceDefVlan().
Based on feedback from Laine Stump, improve a number of the error
handling cases to report the issue to the user instead of not generating
data or giving vague errors. Added the bridge device name to every error
message as well to make it clear which bridge failed.
Mechanical move to break up udevIfaceGetIfaceDef() into different
helpers for each of the interface types to hopefully make the code
easier to follow. This moves the bridge code to
udevIfaceGetIfaceDefBridge().
https://bugzilla.redhat.com/show_bug.cgi?id=896685 points out
a regression caused by commit 38c4a9c - libvirt only labels
the backing chain if the backing chain cache is populated, but
the code to populate the cache was only conditionally performed
if cgroup labeling was necessary.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Hoist cache setup...
* src/qemu/qemu_process.c (qemuProcessStart): ...earlier into
caller, where it is now unconditional.
To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.
The max value of number of cpus to compute(id) should not
be equal or greater than max cpu number.
The bug ocurrs when id value is equal to max cpu number which
leads to the off-by-one error in the following for loop.
# virsh cpu-stats guest --start 1
error: Failed to virDomainGetCPUStats()
error: internal error cpuacct parse error
Don't allow interval to be > MAX_INT/1000 in virKeepAliveStart()
Guard against possible overflow in virKeepAliveTimeout() by setting the
timeout to be MAX_INT/1000 since the math following will multiply it by 1000.
Currently, if lzop decompression binary produces a warning, it
doesn't exit with zero status but 2 instead. Terrifying, but
true. However, warnings may be ignored using '--ignore-warn'
command line argument. Moreover, in which case, the exit status
will be zero.
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
The disk def could be free'ed by qemuDomainChangeEjectableMedia,
which can thus cause crash if we reference the disk pointer. On
the other hand, we have to remove the added shared disk entry from
the table on error codepath.
The hash entry is changed from "ref" to {ref, @domains}. With this, the
caller can simply call qemuRemoveSharedDisk, without afraid of removing
the entry belongs to other domains. qemuProcessStart will obviously
benifit from it on error codepath (which calls qemuProcessStop to do
the cleanup).
Based on moving various checking into qemuAddSharedDisk, this
avoids the caller using it in wrong ways. Also this adds two
new checking for qemuCheckSharedDisk (disk device not 'lun'
and kernel doesn't support unpriv_sgio simply returns 0).
Automating a sorting check is the only way to ensure we don't
regress. Suggested by Dan Berrange.
* src/check-symsorting.pl (check_sorting): Add a parameter,
validate that groups are in order, and that files exist.
* src/Makefile.am (check-symsorting): Adjust caller.
* src/libvirt_private.syms: Fix typo.
* src/libvirt_linux.syms: Fix file name.
* src/libvirt_vmx.syms: Likewise.
* src/libvirt_xenxs.syms: Likewise.
* src/libvirt_sasl.syms: Likewise.
* src/libvirt_libssh2.syms: Likewise.
* src/libvirt_esx.syms: Mention file name.
* src/libvirt_openvz.syms: Likewise.
Due to "feature"/"features" nasty typo, any features marked as mandatory
by one side of a migration are silently considered optional by the other
side. The following is the code that formats mandatory features in
migration cookie:
for (i = 0 ; i < QEMU_MIGRATION_COOKIE_FLAG_LAST ; i++) {
if (mig->flagsMandatory & (1 << i))
virBufferAsprintf(buf, " <feature name='%s'/>\n",
qemuMigrationCookieFlagTypeToString(i));
}
Some functions were using virDomainDeviceInfo where virDevicePCIAddress
would suffice. Some were only using integers for slots and functions,
assuming the bus numbers are always 0.
Switch from virDomainDeviceInfoPtr to virDevicePCIAddressPtr:
qemuPCIAddressAsString
qemuDomainPCIAddressCheckSlot
qemuDomainPCIAddressReserveAddr
qemuDomainPCIAddressReleaseAddr
Switch from int slot to virDevicePCIAddressPtr:
qemuDomainPCIAddressReserveSlot
qemuDomainPCIAddressReleaseSlot
qemuDomainPCIAddressGetNextSlot
Deleted functions (they would take the same parameters
as ReserveAddr/ReleaseAddr do now.)
qemuDomainPCIAddressReserveFunction
qemuDomainPCIAddressReleaseFunction
Recent renames were not reflected into the comments of
libvirt_private.syms; furthermore, since we mix private headers from
several directories into this file, knowing where the file lives
can be helpful.
* src/libvirt_private.sym: Reflect recent names.
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Let users set the port range to be used for forward mode NAT:
...
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
...
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
Support setting which public ip to use for NAT via attribute
address in subelement <nat> in <forward>:
...
<forward mode='nat'>
<address start='1.2.3.4' end='1.2.3.10'/>
</forward>
...
This will construct an iptables line using:
'-j SNAT --to-source <start>-<end>'
instead of:
'-j MASQUERADE'
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
