The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/vz/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/vz/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
f1056279 removed virDomainSnapshotDef.current and leaved
using vm->current_snapshot only. Later 4819f54bd moved current snapshot
tracking to virDomainSnapshotObjList. As vz driver never used
vm->current_snaphot this patch includes fixes after both commits.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
ACKed-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The vz driver only handles three models: virtio, e1000, and rtl8139.
Add enum values for those models, and convert the vz driver to
handling net->model natively
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
To ease converting the net->model value to an enum, add
the wrapper functions:
virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Now that the core of SnapshotObj is agnostic to snapshots and can be
shared with upcoming checkpoint code, it is time to rename the struct
and the functions specific to list operations. A later patch will
shuffle which file holds the common code. This is a fairly mechanical
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
For vzDomainLookupByID and vzDomainLookupByUUID let's
return a locked and referenced @vm object so that callers
can then use the common and more consistent virDomainObjEndAPI
in order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock.
The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
Also adjust the prlsdkHandle{VmState|VmRemoved|Perf}Event APIs
in the same manner.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Rather than have two API's doing different things for different
callers, let's make one API that will always return a locked and
ref counted object. That way, the callers will always know that
they must call virDomainObjEndAPI and not have to decide whether
they should call virObjectUnlock instead.
This will make things consistent with LookupByName which returns
the locked and ref counted object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Broken by [1] commit - trailing comma instead of semicolon. Fortunately
the issue did not get sneak in released 4.2 version. Note that uriSchemes
for parallelsConnectDriver should not be allocated on stack.
[1] 8e4f9a27: "driver: declare supported URI schemes in virConnectDriver struct"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
