Remove the function along with helpers for caching the reply and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the new handler to fetch the required data and do the extraction
locally without conversion to string list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new set hander for getting the data for
'query-command-line-options' which returns everything at once and lets
the caller extract the data. This way we don't need to cache the output
of the monitor command for repeated calls.
Note that we will have enough testing of this code path via
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not look up the index of the passed FD in places where
we already have it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An alternative to qemuVirCommandGetFDSet that takes the index
into the passed FD set as an argument and does not try to look it up.
Use it as well ass virCommandPassFDIndex in qemuBuildChrChardevFileStr
and qemuBuildInterfaceCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few commit back (v6.10.0-5-gb3dad96972) a new helper for
obtaining string arrays from a virJSONObject was introduced:
virJSONValueObjectGetStringArray(). I've identified three places
where it can be used instead of open coding it:
qemuAgentSSHGetAuthorizedKeys(),
qemuMonitorJSONGetStringListProperty() and
qemuMonitorJSONGetCPUDefinitions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
cfg->firmwares still points to the original memory address after being
freed by virFirmwareFreeList(). As cfg get freed, it will be freed again
even if cfg->nfirmwares=0 which eventually lead to crash.
The patch fix it by setting cfg->firmwares to NULL explicitly after
virFirmwareFreeList() returns
Signed-off-by: Guoyi Tu<tu.guoyi@h3c.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
guest-get-disks is available since QEMU 5.2:
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Note that the test response was manually edited based on a reply on my
bare-metal computer. It shows partial results due to pcieport driver not
being currently supported by QGA.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
There might be more potential users around, I haven't looked thoroughly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
To match the QGA schema name (we are introducing a qemuAgentDiskInfo
struct again for different purpose).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Even though it is technically possible, when running the migrations QEMU's
nbd-server-start errors out with:
"TLS is only supported with IPv4/IPv6"
We can always enable it when QEMU adds this feature, but for now it is safer to
show our error message rather than rely on QEMU to error out properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and if there is
only a single CPU definition present in the XML file, then the
baseline handler will exit early and libvirt will print an unhelpful
message:
"error: An error occurred, but the cause is unknown"
This is due to no CPU definition ever being "baselined", since the
handler expects at least two CPU models.
Let's fix this by performing a CPU model expansion on the single CPU
definition and returning the result to the caller. This will also
ensure the CPU model's feature set is sane if any were provided in
the file.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Check the provided CPU models against the CPU models
known by the hypervisor before baselining and print
an error if an unrecognized model is found.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and the
XML file contains a CPU definition without a model name, or
an invalid CPU definition, then the commands will fail and
return an error message from the QMP response.
Let's clean this up by checking for a valid definition and
presence of a model name.
This code is copied from virCPUBaseline.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Hypervisor-cpu-baseline requires the cpu-model-expansion
capability when expanding CPU model features if the
--features flag is provided.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Forgetting to use the VIR_MIGRATE_TLS flag with migration can lead to
leak of sensitive information. Add an administrative knob to force use
of the flag.
Note that without VIR_MIGRATE_PEER2PEER, the migration is driven by an
instance of the client library which doesn't necessarily run on either
of the hosts so the flag can't be used to assume VIR_MIGRATE_TLS even
if it wasn't provided by the user instead of rejecting if it's not.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/67
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's internals were not prepared for switching to -blockdev for the
legacy storage migration. Add a proper error message since qemu is
unlikely to attempt fixing the old protocol.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/65
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move and aggregate all the logic which is switched based on whether the
migration is tunnelled or not before other checks. Further checks will
be added later.
While the code is being moved the error message is put on a single line
per new coding style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our streams are not the best transport for migration data and we support
TLS for security now. It's unlikely that there will be enough motivation
to add a new migration protocol to tunnel NBD too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit dealing with snapshots we must rewrite the
metadata of the previously-'current' checkpoint when changing which
checkpoint is considered 'current'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whether a snapshot definition is considered 'current' or active is
stored in the metadata XML libvirt writes when we create metadata.
This means that if we are changing the 'current' snapshot we must
re-write the metadata of the previously 'current' snapshot to update the
field to prevent having multiple active snapshots.
Unfortunately the snapshot creation code didn't do this properly, which
resulted in the following error:
error : qemuDomainSnapshotLoad:430 : internal error: Too many snapshots claiming to be current for domain snapshot-test
being printed if libvirtd was terminated and restarted.
Introduce qemuSnapshotSetCurrent which writes out the old snapshot's
metadata when updating the current snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't try to manipulate snapshots on network or unresolved volume backed
storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'continue' the loop if the device is not a disk. Saving the level makes
one of the error messages fit on a single line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sparc machines have little in common with sparc64 machines.
No sparc machine type includes a PCI bus, so we should not be adding one
to the XML. This further means that we should not be adding a memory
balloon device, nor USB controller as these are both PCI based.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In QEMU 5.2, the guest agent learned to manipulate a user
~/.ssh/authorized_keys. Bind the JSON API to libvirt.
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to previous commits, we can utilize domCaps to check if
graphics type is supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of 5216304bfe I've moved RNG model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate RNG model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported RNG models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of a33279daa8 I've moved video model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate video model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported video models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the domCaps cache is history, this code is no longer
used and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, whenever a domain capabilities is needed (fortunately,
after cleanup done by previous commits it is now only in
virConnectGetDomainCapabilities()), the object is stored in a
cache. But there is no invalidation mechanism for the cache
(except the implicit one - the cache is part of qemuCaps and thus
share its lifetime, but that is not enough). Therefore, if
something changes - for instance new firmware files are
installed, or old are removed these changes are not reflected in
the virConnectGetDomainCapabilities() output.
Originally, the caching was there because domCaps were used
during device XML validation and they were used a lot from our
test suite. But this is no longer the case. And therefore, we
don't need the cache and can construct fresh domCaps on each
virConnectGetDomainCapabilities() call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807198
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
